Domus CHAM-03 User manual

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: [phone] | Fax: [phone]
sales@domuslighng.com | www.domuslighng.com
Installaon Manual
Note: -The lamp must be installed by professional electrician
 -Ensurethepowersupplyisswitchedobeforengthisproduct
-Do not touch the lamp when in use
-Keepawayfromhotsteamandcorrosivegas
Receiver
Input Voltage: 12-24VDC Current: 4x5A Output: 4x(60-120W) Remark: Constant Voltage
Specicaons
Remote
Operaon Voltage: 4.5VDC Operaon Frequency: 434MHz/868MHz Remarks: RF Wireless
Wiring:
• Please wire the RF colour controller as per below instrucons. Domus has included 2 wiring examples. If
you require any more technical informaon please don’t hesitate to contact our sales o for more technical
informaon.
Learning/paring funcon:
• Please wire as per instrucons. (Please make sure that the correct LED driver has been used and is within the
rated power of the controller and LED strip lighng)
• Please make sure power is on to the CHAMELEON RF dimmer controller.
• Please make sure baeries have been installed into the RF remote control (Not included)
• To start the “learning / pairing” process the remote need to come out of “Sleep mode”. To do this simply press
the “ON” buon on the RF remote control.
• Once the “ON” buon has been pressed on the RF remote control please press the “Learn Buon” located on
the front panel of the receiver. (Only a quick press is required).
• Next step is to touch the “Colour wheel” on the RF remote control. If the process above has been done
correctly the LED strip lighng will BLINK to conrm correct “Pairing” has been done.
Please note: If you hold the “Learn Buon” down for longer than 5 seconds this will delete the saved ID and the
above process will need to be repeated.
* The CHAMELEON-03 has the ability to work in either MASTER or SLAVE mode to do this please adjust the
jumper socket located besides the power input. The jumper socket is for MASTER or SLAVE mode. If you want
mulple receivers to run in synchronizaon please set rst controller as MASTER (via jumper socket) and other
receivers as SLAVE (via jumper socket).
CHAM-03
Order Code Product Code Descripon
20112 CHAM-03 RF RGBW colour controller
Thank you for purchasing the CHAMELEON-03 RF RGB-RGBW colour controller. The CHAMELEON-03 gives you
the ability to now create eects, colour to suit your applicaon or your mood.
• Simple touch colour changing via “Touch Sensive” colour wheel
• “Fine tune” colour adjustments.
• 1 zone control.
• RGB or RGBW colour control.
• MASTER or SLAVE selectable*
• 10 Built-in colour modes.

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: [phone] | Fax: [phone]
sales@domuslighng.com | www.domuslighng.com
Operaon Manual
Note: -The lamp must be installed by professional electrician
 -Ensurethepowersupplyisswitchedobeforengthisproduct
-Do not touch the lamp when in use
-Keepawayfromhotsteamandcorrosivegas
RG
BW
S1 S2
On\O For warm white, natural
white, cool white changing.
(Though the three RGB
colour mixing)
Indicator Colour Wheel
Select Red Channel
(Short press turns RED ON/OFF,
Long press DIMS RED)
Select Green Channel
(Short press turns GREEN ON/OFF,
Long press DIMS GREEN)
Select Blue Channel
(Short press turns BLUE ON/OFF,
Long press DIMS BLUE)
Select White Channel
(Short press turns WHITE ON/OFF,
Long press DIMS WHITE)
Save colour/scene
Brightness for
RGB channel
Save colour/scene
Play & pause buon.
There is 10 built-in
modes. Short press it
will play, short press
again, it will pause.
Long press it will speed
up/down.

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: [phone] | Fax: [phone]
sales@domuslighng.com | www.domuslighng.com
Installaon Manual
Note: -The lamp must be installed by professional electrician
 -Ensurethepowersupplyisswitchedobeforengthisproduct
-Do not touch the lamp when in use
-Keepawayfromhotsteamandcorrosivegas
Simple connecon
Wiring Diagram + Data repeater
RG
BW
S1 S2
240VAC power input
12-24VDC OUTPUT
Constant voltage LED driver 12-24VDC
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
Learn button
V+
V-
V+
R-
G-
B-
W-
Power Input LED power output
CHAMELEON-03 RGBW LED Colour controller
LED RGB / RGBW strip lighting
RG
BW
S1 S2
240VAC power input
12-24VDC OUTPUT
Constant voltage LED driver 12-24VDC
Learn button
V+
V-
V+
R-
G-
B-
W-
Power Input LED power output
CHAMELEON-03 RGBW LED Colour controller
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
LED RGB / RGBW strip lighting
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
LED RGB / RGBW strip lighting
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
+
B
G
R
+
R
G
B
LED RGB / RGBW strip lighting
CHAMELEON-05 RGBW LED Colour data order
CHAMELEON-05 RGBW LED Colour data order