Dongtuo KC-88 User manual

0
Multifunctional ozone & anion generator
Model：KC-88

1
Catalog
1．Security Advice ---------------------------------------------------------------- 1~2
2．Operation Cautions----------------------------------------------------------- 2~5
3．Technical parameter---------------------------------------------------------- 6
4．Packing accessories---------------------------------------------------------- 6
5．Name of parts & specification---------------------------------------------- 7
6．Operation instruction--------------------------------------------------------- 8~10
7．Failure repair ------------------------------------------------------------------ 10~11
8．Service terms ------------------------------------------------------------------ 12
9．Warranty ------------------------------------------------------------------------ 13

2
1. Security Advice
Warning sign: Remind the users, this product has the high
voltage.
Caution: Remind the users, notice to maintain the product
correctly.
1.1 Power supply: 220 V ~240V, 50HZ/60HZ.
1.2 If do not use the product for a long time, please takes off the power
plug from the jack, and cut off the power supply completely.
1.3 There exist high voltage in the ozone generators, must not open the
housing personally or without any professional directions. Otherwise, it
is dangerous.
1.4 If the power cord or plug was damaged, please contact the dealer or
after-sales service for repairs or change.
1.5 Do not let any sharpness metal or liquid get into the gas inlet or
outlet hole to avoid an electric shock or the product damaged.
1.6 For your safety, never open the housing of product to repair or refit
personally or by yourself.
1.7 When clean the casing of product, please take off the power plug,
then wipe the dust with a soft & dry cloth.
1.8 Do not use the product in bathroom & humidity place or close to the
Inflammable & bombing articles places, to avoid the electric shock or
fire.
1.9 Do not put the machine on the place where the kids can touch it

3
easily, otherwise it will hurt the kids or the ozone generator will get
failure.
1.10 Do not place the machine close to TV, Computer or any other else
magnetic force electrical equipments, otherwise the electrical
equipments will be influenced by the ozone generators. (Should be
have 1 meter distance)
1.11 This kind of machine has no function of increase the oxygen
concentration in the air or eliminate carbon monoxide. So when you use
it with the burning cooking appliance, please keep the room ventilation,
to avoid the carbon monoxide poisoning.
2. Operation Cautions
2.1 when purifying the water, the ozone generator should be over
surface of the water. To avoid the water come back into the ozone
generator via the ozone hose when the ozone generator stop working.
Otherwise it will make the machine failure.
2.2 Do not start the ozone generator directly under high
temperature(Over 42 ℃) or in the more fume or high humidity place.
Otherwise it will influence the efficiency of ozone output or ozonizer’s
working life.
2.3 Do not fall or hit the ozone generator, be carefully when move the
ozone generator. Do not cover the gas inlet or outlet mouth in order to
avoid the influence about ventilation.

4
2.4 Please proper place the ozone generator to avoid accident from the
kids’ the wrong operation.
2.5 Please keep the ozone hose clean; never press the ozone output
hose.
2.6 When use ozone for sterilization & Deodorant; the eyes or noise
never touch ozone output directly, otherwise you will feel uncomfortable.
2.7 When use ozone for air purifying in a airproof room, the person
should leave the room. When it was finished after 30~40 mins, the
person can get into the room.
2.8 When use ozone sterilization or disinfection, If you feel
uncomfortable or strongly irritative and dizziness, just stop the ozone
generator working.
2.9 If the indoor air does not flow, please do not use the ozone
generator for a long time. You should open the window to avoid the
indoor ozone concentration is too high.
2.10 If the water is processed by the ozone generator, keep the water
20~30 min later, it can be drinking without any problem. If you have the
filter, then it feels better.
2.11 The safety value of ozone concentration: 0.01~0.1ppm, it equal to
the ozone concentration in natural word.
① When use ozone for indoor air sterilization & purifier, the
person should not get into the room.
② The human being’s breath systems should not be exposed in

5
air that ozone concentration is over 0.1ppm for a long time.
③ The ozone’s Half-Life in air(Normal temperature) is 30 mins.
④ The ozone’s Half-Life in water (Normal temperature) is 20
mins.
2.12 It is normal that the ozone hose become white or yellow after a
long using.
2.13 For water purifying, the diffuser stone should be putting into the
deepest place of water. The depth of water is 18CM~40CM, the ozone
was dissolved very well and you can get a wonderful effect of purifying
water.
2.14 Be careful, it has high voltage inside, so do not open the housing to
avoid the electric shock. If you need help, please contact the service
department.
2.15 When anion generator is working, it will create static magnetic field
within 1 meter of diameter around the ozone generator. It can absorb
the dust. And create the static magnetic field to human being when
human being touches machine but no dangerous. It is safety.
2.16 Should power off when repair or maintain.

6
3. Technical parameter
Name: multifunctional ozone & anion generator
Model: KC-8
Voltage: 220V~240V
Frequency: 50HZ/60HZ
Wattage：15W
Ozone output: < 600mg/hr
Anion output (test it from the output 15CM distance): 4000 thousand /
CM3
Anion created : Carbon Fiber
Control panel button: power on/off button ; touch button; LED indicator
Ozone working timer: 0~30 mins
Anion working timer: 4 h, 8h, 12 h or even long
Automatically: The ozone & anion working status can be switch
automatically by 4 h, 8h, 12 h alternation.
Available Ozone purifying area: 20M2
Available Anion purifying area: 15 M2
Dimension: 310mm*238mm*88mm
Weight: 1.2 kgs
4. Packing accessories:
Open the packing box, check the following accessories；
A. Manual

7
B. ozone hose : 2
C. Diffuser stone: 3
5. Name of parts & specification
Background of the product

8
6. Operation instruction
6.1 Anion air purifier operation step:
6.1.1 Put the plug into jack, the machine is electrified and power
indicator is lighted. The machine is being designated state.
6.1.2 Press the power ON/OFF button, the anion air purifying start
working continuously, the anion indicator is lighted; ozone working timer
display : 00; if you want to stop the anion working, press the power
ON/OFF button again.
6.1.3 If do not use the product for a long time, please takes off the
power plug from the jack, and cut off the power supply completely.
6.2 Ozone air / water purifier operation step:
6.2.1 Connect the diffuser stone & ozone hose very well then put the
diffuser stone into the bottom of container waiting for purifying water.
PS- If you make the ozone air purifier, you do not need to connect the
hose & diffuser stone.
6.2.2 Put the plug into jack, the machine is electrified and power
indicator is lighted. The machine is being designated state.
6.2.3 Press the power ON/OFF button, the anion air purifying start
working continuously, the anion indicator is lighted.
6.2.4 Press the ozone working timer (Time/O3) button, the time will be
added 5 min if you press the button once time. The time range is from
0~30 mins, the windows in the control panel display the time. While the

9
anion stop working.
6.2.5 If you want to stop the ozone generator working, just press the
power ON/OFF button or the anion working switch button (the anion
generator start working).
6.2.6 If do not use the product for a long time, please takes off the
power plug from the jack, and cut off the power supply completely.
6.3 Ozone & anion working state automatically switch operation step:
6.3.1 put the plug into jack, the machine is electrified and power
indicator is lighted. The machine is being designated state.
6.3.2 Press the power ON/OFF button, the anion air purifying start
working continuously, the anion indicator is lighted.
6.3.3 Press the ozone working timer (Time/O3) button, the time will be
added 5 min if you press the button once time. The time range is from
0~30 mins, the windows in the control panel display the time. While the
anion stop working. (Refer to the operation steps above.)
6.3.4 When you selected the ozone generator working period; then
press the cycle work timer (AUTO) button. The cycle working indicator
light will display 4h(firstly), 8h(secondly), or 4h & 8h indicator was
lighted at the same time when you press thirdly time(it means you time
12 h cycle working time of anion; after 12 hours, the it will be switch to
ozone working automatically ). When you press AUTO button fourthly,
4h & 8h indicator do not be lighted. (PS-it means there is no cycle

10
working state is active). The ozone & anion automatically switch
alternation working period will be 4h, 8h, and 12h.
6.3.5 If do not use the product for a long time, please takes off the
power plug from the jack, and cut off the power supply completely.
7. Failure repair
Dear customers:
If you got problem for using the machine, please check it following the
below mentioned items. If the problems still can not be resolved, please
call the service department for repair.
7.1 When normally operate the machine, if you found there is no ozone
come out from the diffuser stone, the ozone was reduced dramatically.
Please check with the following item:
A. If there any breaches or fold exist in the ozone hose, change the
ozone hose or keep the ozone hose ventilating straightly.
B. Is the diffuser stone blocked, please change the diffuser stone.
PS- after change the hose & stone, the problem still exist. Please call
the service department for reparation.
7.2 When normally operate the machine, but you can not smell the
ozone, please call the service department for reparation.

11
7.3 When normally operate the machine, if the power indicator is not
lighted. Please the power cord is completely not damaged. Or the plug
& the jack have a good connection or not. If the jack becomes flexible,
just change it. Otherwise call the service department for reparation.
7.4 There is much dust existed in the casing or around of the machine. It
is normal. That means the anion generator works good, not the failure.
7.5 If the anion indicator is lighted, but there is not fan from the anion
outlet. Please contact the service department.
PS- for ensure your safety, must not open the casing of the machine for
reparation or refit personally; without any direction from technical
worker.