Donner Fush User manual

The FUSH is inspired by the legendary
American-made white overdrive/distortion
pedal, bringing you a huge tube driven
sound with both wide dynamic and tonal
ranges. Use the toggle to select from two
different sound variations.
Introduction
Overview
Owner’s Manual
READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a convenient
place for future reference.
Power Supply
Always use a DC 9V center negative AC
adapter. Use of an adapter other than
that specified could damage the unit or
cause malfunction and pose a safety
Handling
Do not apply excessive force to the
switches and other controls, exposing
the unit to strong impacts, which could
cause it to break.
Do not put foreign objects or liquids into
the unit.
Never open the case or attempt to
modify the product in any way since this
can result in damage to the unit.
Clean only with a soft, dry cloth.
●Inspired By Classics And More
The FUSH is inspired by the legendary
American-made white overdrive/distortion
pedal, delivering a huge tube driven
sound with wide dynamic range.
●Easy Controls, Wide Flexibilities
The FUSH features an easy-to-use three
-knob tone control: VOL (output volume),
TONE (brightness) and GAIN (overdrive
amount) for using in different scenarios.
Each knob gives you a wide control
range.
●2-way Tone Switch
The FUSH offers a the 2-way selector for
choosing from three sound types for
satisfying different musicians:
: Edgy, more powerful sound
: Original neutral sound
●Carefully Selected Components
The FUSH is designed and built with
carefully selected components to ensure
hazard.
Always connect the AC adapter to an AC
outlet that supplies the rated voltage
required by the adapter.
Disconnect the AC adapter from the AC
outlet when during lightning storms or not
using the unit for an extended period.
Connections
Always turn off the power before
connecting or disconnecting. Make sure
to disconnect all cables and AC adapter
before moving the unit. This will help
prevent malfunction and damages.
Environment Considerations
Avoid using the unit in any of the
following conditions that could cause
malfunction:
●Extremely hot or cold places
●Under direct sunlight
●Magnetic fields
●Near heaters and other heat sources
●Sandy or dusty places
●Places that are extremely humid or
exposed to splashing water
●Places with lots of vibrations
Electrical Interference
Devices that are very susceptible to
interference or that emits powerful
electromagnetic waves (e.g. radios and
TVs) should not be placed near this unit,
as interference could occur.
Electromagnetic interference could cause
malfunction and could corrupt or destroy
data.
Always operate this unit at a suitable
distance from these devices.
Precautions

Features
●Powerful, rich distorted sound with
flexible 2-way tone selector
●Classic American tube overdrive
/distortion pedal
●Wide range tone controls suitable for
both vintage and modern players
●True bypass provides transparent tone
●LED indicator shows the working state
●Enduring, light-weighted Aluminum-
alloy chassis
Specifications
Power Requirement: 9V DC center
negative
Current Consumption: 10mA
Dimensions: 42x93.5x52mm
Weight: 220g
Material: Aluminum alloy
a
b
c
d
Input Jack:
1/4” mono audio jack, for connecting
guitar.
Output Jack:
1/4” mono audio jack, for connecting
to an amplifier.
DC 9V Jack:
For power supply, use a 9-volt DC
regulated by ac adapter, 500mA (plug
polarity is positive on the barrel and
negative in the center).
VOL Knob:
Controls the output volume.
TONE Knob:
Controls the effect tone.
GAIN Knob:
Controls the gain amount.
Tone Selector:
Selects from two modes:
: Edgy, more powerful sound
: Original neutral sound
Footswitch and LED:
Tap to switch the unit on/off. The LED
will lit up when the effect is on.
Connections & Controls
c
g
a
b
d e
f
h
h
e
f
g
h
best sound quality and road performance.
The solid Aluminum-alloy chassis ensures
touring reliability, and True Bypass design
gives you a transparent tone.
www.donnerdeal.com