Donner MORPHER User manual

Inspired by the legendary high gain
stack amps, while combining wide
dynamic range, high definition and
flexible onboard controls, the Morpher
delivers you a huge modern high gain
distortion sound suitable for both
shredding and riffing.
Introduction
Owner’s Manual
Precautions
READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a convenient
place for future reference.
Power Supply
Always use a DC 9V center negative AC
adapter. Use of an adapter other than
that specified could damage the unit or
cause malfunction and pose a safety
hazard.
Handling
Do not apply excessive force to the
switches and other controls, exposing
the unit to strong impacts, which could
cause it to break.
Do not put foreign objects or liquids into
the unit.
Never open the case or attempt to
modify the product in any way since this
can result in damage to the unit.
Clean only with a soft, dry cloth.
Overview
●Mini High Gain Monster
The Morpher is a mini modern high gain
distortion pedal inspired by the huge
high gain stack amp sound. By
switching it on, the Morpher can
transform any gentle clean amp into a
high gain monster!
●Easy Controls, Wide Flexibilities
The Morpher features an easy-to-use
three-knob tone control: LEVEL (output
volume), TONE (brightness) and GAIN
(distortion amount) for using in different
scenarios. Each knob gives you a wide
control range.
●3-way Tone Switch
The Morpher offers a the 3-way selector
for choosing from three sound types for
satisfying different musicians:
Natural: Neutral mode that delivers an
organic, natural tone
Tight: A more aggressive tone with
enhanced bottoms and edges
Classic: Provides a classic UK-style
high gain sound with warm mids
Always connect the AC adapter to an AC
outlet that supplies the rated voltage
required by the adapter.
Disconnect the AC adapter from the AC
outlet when during lightning storms or not
using the unit for an extended period.
Connections
Always turn off the power before
connecting or disconnecting. Make sure
to disconnect all cables and AC adapter
before moving the unit. This will help
prevent malfunction and damages.
Environment Considerations
Avoid using the unit in any of the
following conditions that could cause
malfunction:
●Extremely hot or cold places
●Under direct sunlight
●Magnetic fields
●Near heaters and other heat sources
●Sandy or dusty places
●Places that are extremely humid or
exposed to splashing water
●Places with lots of vibrations
Electrical Interference
Devices that are very susceptible to
interference or that emits powerful
electromagnetic waves (e.g. radios and
TVs) should not be placed near this unit,
as interference could occur.
Electromagnetic interference could cause
malfunction and could corrupt or destroy
data.
Always operate this unit at a suitable
distance from these devices.

Connections & Controls
Features
●Modern high gain distortion pedal with
great dynamic range and clarity
●Sound inspired by high gain stack
amps
●Wide range tone controls suitable for
both vintage and modern players
●True bypass provides transparent tone
●LED indicator shows the working state
●Enduring, light-weighted Aluminum-
alloy chassis
Specifications
Power Requirement: 9V DC center
negative
Current Consumption: 20mA
Dimensions: 42x93.5x52mm
Weight: 230g
www.donnerdeal.com
a
DC 9V Jack: For power supply, use a
9-volt DC regulated by AC adapter,
500mA (plug polarity is positive on the
barrel and negative in the center).
Input Jack: 1/4” mono audio jack, for
connecting guitar.
Output Jack: 1/4” mono audio jack,
for connecting to an amplifier.
LEVEL Knob: Controls the output
volume.
TONE Knob: Controls the effect tone.
GAIN Knob: Controls the distortion
amount.
Tone Selector: Selects from three
modes:
Natural: Neutral mode suitable for
most music styles
Tight: Provides a more aggressive
sound with more low ends and high
ends
Classic: Provides a classic UK-style
high gain sound
Footswitch and LED: Tap to switch
the unit on/off. The LED will lit up
when the effect is on.
a
b
c
d
e
f
g
h
b
c
f
d eg
h
h
●Carefully Selected Components
The Morpher is designed and built with
carefully selected components to ensure
best sound quality and road performance.
The solid Aluminum-alloy chassis ensures
touring reliability, and True Bypass design
gives you a transparent tone.