Channels:
BT-200
Operation
6EN
1. CH01: Bluetoothmode (Default )
2. CH02:Auxiliary
Press " M" button tochange channel.
Channel
Note:
Volume:
Press "Volumeup/down" button (seepage4) to adjustsound.
Vol-
There are twodifferent modes.
Vol+
Toconnect while inBluetooth mode.
Sync and pairthe two devices.
Once connection isestablished, begin to play music, make,
answer, orend a phonecall.
If asked fora PIN, enter"0000".
Discovery:
Power on. (DefaultCH01Bluetooth)
The other Bluetoothcompatible device willfind "BT-200".
Connection:
Discover or Pairing:
If device isconnected, an alternating,blue and red,light will
flash.
Standby:
While device issearching, an alternating,blue and red,light
will flash.
Active:
Once Bluetooth deviceis connected successfully, a bluelight
will flash slowly.
Note:
Toconnect to adevice: notebook, mobilephone, tablet etc.
follow the instructionsfor the device.
Once the speakeris connected, set sound to
If the devicecannot connect to the speaker, simply reboot the
speaker.
"Output"
Bluetooth:
Mode