Doran SMARTLINK 360SLT User manual

MANUFACTURING LLC
Please read this manual carefully
before using this product.
360SLT
SMARTLINKTM TPMS TABLET
USER MANUAL

INDEX
I. INTRODUCTION .............................................................................................................1
1. PACKAGE AND ACCESSORIES ....................................................................................................... 1
2. START TO USE .............................................................................................................................. 2
3. CONNECT TO THE COMPUTER..................................................................................................... 3
II. FUNCTIONS AND APPLICATIONS....................................................................................4
1. INTRODUCTION ........................................................................................................................... 4
2. OPERATION.................................................................................................................................. 5
2.1 READ SENSOR (TIRE) DATA .............................................................................................. 5
2.2 PROGRAMMING............................................................................................................ 10
2.3 ACCESS SAVED FILE ....................................................................................................... 13
III. SETTINGS .................................................................................................................. 15
1. UNITS OF MEASURE................................................................................................................... 15
2. SET PASSCODE ........................................................................................................................... 16
3. VERSION .................................................................................................................................... 17
IV. TRANSFER DATA TO COMPUTER ................................................................................. 18
V. FAQ and TIPS .............................................................................................................. 19
1. FREQUENTLY ASKED QUESTIONS............................................................................................... 19
2. TIPS ............................................................................................................................................ 20
3. SPECIFICATIONS ......................................................................................................................... 20
VI. CERTIFICATES............................................................................................................. 21
VII. LIMITED WARRANTY ................................................................................................ 21

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
1
I. INTRODUCTION
DORAN 360SLT is a SMARTLINK™ TPMS Tablet used to communicate with all DORAN
TPMS products with RF or LF transmitting capability that cover the Truck and Trailer Fleets,
OFF Road Equipment and Multi-Trailer applications. It can be used to set up the
transceiver configuration and also help to access the data information of the transceiver
about tire status.
DORAN 360SLT is designed based on the Google Android system with smart operation
experience. With both touch screen and key buttons, customers are able to operate it
easily. It can also be connected to computers so that saved data can be downloaded for
documentation and analysis.
1. PAC KAGE AND ACCESSORIES
The product comes with the following components:
SMARTLINK™ TPMS Tablet
USB cable
Power adapters
Quick reference guide
Operation manual (included in the tablet with e-copy or can be downloaded
from www.doranmfg.com for latest version)
Tablet Description

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
2
Display and Touch Screen: Shows information and configuration. It is also used to setup
and access information by touch operation.
Power Button: Press and hold in order to turn the device ON or OFF. Press briefly to
turn the backlight ON or OFF.
Navigation Arrow Buttons:Use to move the displayed active menu for operating.
OK Button:Use to confirm the operation in the selected (active) window.
MENU button: Press one time to return to the previous menu. Press and hold to go
directly to the main menu.
2. START TO USE
Before powering on the device, make sure it is fully charged and has enough power
for operating.
To charge the device, use the adapter and cables provided and insert the USB mini port
into the device.
To power on the device, Press and Hold the power button on the top right until the
display light turns on. Then release the power button and the device will automatically
finish the start up process and enter into the main menu for TPMS operation.
The display backlight will switch off if there is no operation for 5 minutes. Press the power
button briefly to turn the backlight/display ON. Turn off the device if it will not be used for
a long time by pressing and holding the power button. The RF module and Android device
will consume certain power even when the backlight/display is turned off while leaving
the device powered on.
The tablet can setup the scheduled ON or OFF time by following the device system setting
menu: SETTINGS/Scheduled power on & off.

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
3
3. CONNECT TO THE COMPUTER
The device can be connected to a computer with the USB cable provided to transfer data.
To connect the tablet and computer, insert the mini USB port to the tablet and the other
end of the USB cable to the computer.
The below screen will open up once the connection is completed successfully. Press “Turn
on the USB storage” to enable the tablet to be a USB disk of the compu te r.

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
4
A disk named 360SLT will appear on the computer screen after confirming the window
shown above. Double click to enter into the disk where it will show all the system files.
The folder named SMARTLINK TPMS TABLET has all the saved data. Detailed operation
about data transfer will be explained in part Ⅳ.
II. FUNCTIONS AND APPLICATIONS
1. INTRODUCTION
DORAN 360SLT SMARTLINK™ TPMS TABLET is an all-in-one tool that can be used for all
the DORAN TPMS products. To enable the user to follow each application easily and
clearly, the tool is designed by the principle of application scenario. Customers can select
the right application by clicking the sub-menu in the main menu list.
TRUCK AND TRAILER FLEETS
For customers who apply the TPMS to the truck and trailer fleet
OFF ROAD EQUIPMENT
For customers who apply the TPMS to the OFF Road equipment
MULTI-TRAILER APPLICATIONS
For customers who apply the DORAN Multi-trailer TPMS products
SETTINGS
Set up the system parameters and check the product version information

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
5
In each application menu, the customer can finish the operations such as reading sensor
(tire) data, configuring a TPMS transceiver and accessing saved data.
2. OPERATION
2.1 READ SENSOR (TIRE) DATA
READ INDIVIDUAL SENSOR
Customers will be able to read and access each individual sensor that is attached to a tire
valve stem. Only sensors that have LF capability can be read. After successfully reading the
sensor, customers will have access to the below information:
•TPMS sensor ID
•Current tire pressure
•Current tire temperature
To read an individual sensor, click the menu “INDIVIDUAL SENSORS” to access the screen
shown on the next page.

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
6
Put the tool close to the sensor to be read and tap the sensor image on the left, the tool
will read the current sensor information automatically. After reading successfully, the
display will return the data as shown below.
READ SENSOR DATA BY WALK AROUND
WALK AROUND enables a customer to access the tire data of a truck, trailer, or other
equipment with a Doran TPMS sensor that has LF capability by walking around the vehicle.
The data received from the sensor will be recorded and can be saved in the accordant
wheel position. Saved data can be reviewed later or transferred to the computer via USB.
Use “TRUCK WALK AROUND” in TRUCK AND TRAILER FLEET as an example:
Press the menu “TRUCK WALK AROUND” to enter into the screen shown on the next
page.

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
7
To read and record the tire data of each wheel position, select the tire accordingly and
hold it (Or Hold OK button) for 3 seconds. The sensor ID, pressure and temperature
information will be shown.
A window will open up when the wheel image is pressed. Input tire serial number, tire
position ID and tread depth (Optional).
After entering the additional information (optional), press CONFIRM to exit out the sensor
reading screen.
Repeat the above operation for all the sensors (tires) and retrieve tire information. Before
selecting SAVE, enter the TRUCK# which will be used as the default file name in the data
fo lder.

Doran #360SLT user manual
Doran Mfg. LLC •2851 Massachusetts Ave •Cincinnati, OH 45225 •866-816-7233 •
Doranmfg.com
8
Press BACK to return to the upper level menu.
READ SENSOR DATA IN TRANSCEIVER
Access tire data by ONE-CLICKTM feature available on Doran SMARTLINK™ Transceivers. It
enables all the tire data to be read that’s available in the transceiver with just one click.
The most recent updated data received from the sensors included in the transceiver will
be recorded and can be saved in the accordant tire position. Saved data can be reviewed
later or transferred to a computer via USB.
Use “ ONE-CLICKTM TRANSCEIVER” in “OFF ROAD EQUIPMENT” as an example:
Press menu “ONE-CLICKTM TRANSCEIVER” and enter into the screen below.
Select READ to read the sensor data of the transceiver. The screen, shown below, will
open, giving the option to select the correct transceiver by ID or trailer/unit number. This
helps access a specific transceiver if there is more than one transceiver available.