Dorel Home Products 1075348COM User manual

1075348COM
Bar Cabinet
B341075348COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.

Contact Us!
Helpful Hints
2
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2

3
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
12
34
Press parts together so CAM BOLT inserts
into edge hole.
Press CAM BOLT into hole. Press CAM LOCK into hole.
End hole
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
Arrow to point towards end
hole in edge of part.

4
Before You Start
Quick
Assembly
Tip
Please Note:
You may need to lightly tap the wood dowels into the holes during
your assembly process.

5
Board Identification
Not actual size
Left Panel
31075348010 Right Panel
31075348020
Partition
31075348030
Top
31075348040
Bottom
31075348050
Left Adjustable Shelf
31075348060
Right
Adjustable Shelf (x4)
31075348070
Left Front Leg
31075348080 Right Front Leg
31075348090 Left Rear Leg
31075348100
Right Rear Leg
31075348110
Top Rail
31075348120 Shelf Rail (x4)
31075348130 Shelf Divider (x4)
31075348140
Door
31075348150
ABC
DEF
G
H
I
JK
LMNO

6
Board Identification
Not actual size
Back Panel
K107534800
BACK
PNL
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
A
B
C
D
E
F
G
H
I
J
L
M
N
O

7
Part List
Actual Size
2
67
4
11
5
12c
12b
12a
12d
(x10)
#A22700
cam lock
(x10)
#A22710
cam bolt
(x10)
#A21670
wood dowel
(x12)
#A12120
7/16" screw
(x14)
#A22910
connector bolt
(x14)
#A22920
connector
(x2)
#A17400
8-32 x 7/8" truss
(x2)
#A23030
confirmat screw
(x1)
#A84050
safety bracket kit
(not to size)
(x20)
#A80250
shelf support
(x12)
#A21110
nail
(x8)
#A21960
hidden fastener
(x8)
#A21980
hidden face connector
13
8910
13
12

8
Not Actual Size
Part List
(x2)
#A65640
hinge
(x1)
#A51715
handle
14 15

9
STEP1
(x12)
H
I
J
K
7
7
7
7
7
7
7
7
7
7
7
7
7

10
STEP2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
2
2
(x2) (x6)
(x2) (x2)
You will need to tap the connector
(4) with a hammer to fully insert.
Be sure the connector is positioned
as shown before tapping into hole.
1
2
34
3
3
4
4
4
4
4
1
1
A

11
STEP3
H
A
J
4
Turn screw clockwise
to lock parts together.
End View

12
STEP4
2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
You will need to tap the connector
(xx) with a hammer to fully insert.
Be sure the connector is positioned
as shown before tapping into hole.
(x2) (x2) (x2) (x6)
2
1234
1
1
3
3
4
4
4
4
4
4
B

13
STEP5
Turn screw clockwise
to lock parts together.
B
I
K
4
End View

14
STEP6
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x4) (x4)
E
13
3
3
3
3
1
1
1
1

15
STEP7
UNLOCKLOCK
A
E
B
Finished Edge
H
I

16
STEP8
C
(x2) (x2)
1
1
1
3
3
3

17
STEP9
C
E
5
5
5
(x2)
Finished Edge

18
STEP10
2
7
12a
12b
2
D
2
2
2
2
2
(x6) (x2)
7
7
12a
12b
Do not fully tighten screw.
(x1)

19
STEP11
D
L
L
4
4
Turn screw clockwise
to lock parts together.
(x2)
4
4

20
STEP12
UNLOCKLOCK
D
A
B
C