Dorel Home Products 4087419WE User manual

DO NOT RETURN TO THE STORE !
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
4087419WE
B344087419WE00
Date of Purchase
Upholstered Bed
C.W. - 2018/8/25
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Lot Number
Thank you for purchasing from DHP!
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
© 2014 Dorel Home Products All Rights Reserved
Twin
Grey Linen
Weight Limit: 250 Lb / 113 Kg

Monday to Friday
Saturday
Sunday
1-800-267-1739
9:00 am to 9:00 pm (Eastern Time)
10 am to 6:30 pm (Eastern Time)
11 am to 7 pm (Eastern Time)
DHP Consumer Services
12345 Albert Hudon, Suite 100,
Montreal, Quebec, Canada H1G 3L1
●This product is designed for home use and not intended for commercial use.
●This product contains small components. Please ensure that they are kept away
from small children.
●Do not use power tools to assemble your furniture. Power tools may strip or
damage the parts.
Caution
[e-mail]
Contact Us!
For help with assembly, identifying parts, product information or to order parts,
please contact us:
Warranty Information
DHP warrants this product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers one year from the date of
original purchase. This is solely limited to the repair or replacement of defective
parts and assembly labor is not included.
This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way.
Liability for consequential damages is excluded to the extent exclusion is permitted
by law. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
To obtain warranty service, purchaser must present original bill of sale. Components
repaired or replaced are warranted through the remainder of the original warranty
period only. The defective components will be repaired or replaced without charge,
subject to the terms and conditions described above.
Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and
Canada.
Read Before Beginning Assembly
●Call our toll free number if you need assistance.
●Work in a spacious area and near where the unit will be used, preferably on a
carpet, or use a piece of the cardboard packaging to protect your floor and product.
●Recommended # of people needed for assembly: 2(however it is always better
to have an extra hand). Estimated assembly time is 2 h.
●Make sure all parts are included. Most parts are labeled or stamped on the raw
edge.
●Read each step carefully. It is very important that each step of the instructions is
performed in the correct order. If these steps are not followed in sequence,
assembly difficulties will occur.
●You can visit our site https://helpcenter.dhpfurniture.com (Scan below
QR-code if you possess a smartphone or tablet) for assembly videos and more!
2
SCANme
& I'll guide you to
DHP Helpcenter!

3
Parts
All in 1 big box!
Before you throw the package, please use the
Check Box to identify the parts and ensure that
you have all the parts needed for the assembly.
There are inner box(es) that include components
required to complete this assembly.
Replacement Parts, visit
www.dhpfurniture.com/eng/replacement-parts
A
Headboard
T950800
X 1
Footboard
T950810
X 1
Side Panel
T950820
X 2
F
Side Panel
T950830
X 2
Side Rail
T926670
X 2
G
Side Rail
T926680
X 4
Side Rail
T926690
X 2
IJ
Center Rail
T926700
X 2
Center Rail
T926710
X 1
Cross Brace
T926720
X 1
Support Leg
T926730
X 2
Support Leg
T947750
X 2
NS
T
XYZ
Corner Bracket
T393110
X 4
Wooden Slats
T926760
X 24
Bracket
T393080
X 2
Bracket
T393090
X 2
Single Slat Cap
T926370
X 24
Double Slat Cap
T926380
X 12
Leg
T941620
X 4
BCD
HK
O
A
B
C
C
D
D
I
K
G
JL
Z
S
N
X
H
F
M
O
LM

4
Hardware Pack
Hardware Pack #: T4107119-00
Please do not completely tighten all the hardware,
until the entire assembly is complete, unless
otherwise indicated in the step-by-step
instructions.
The screw(s), bolt(s) to be used at each step are
shown in actual size in the lower right corner of
the page.
6 7 8
4 5
3
21
1/4" X 3/4"
X 40
1/4" X 1 9/16"
X 28
1/4" X 1 3/8"
X 6
1/4" X 1 3/4"
X 3
5/16" X 2 1/4"
X 4
1/4"
X 3
4mm
X 1
Wrench
X 1

5
Step 1
Attach Fand Hto Cand Dwith Z.
Repeat the same step for remaining parts
C, D, F and H.
X 16
The slat holes on F should
be facing upward.
3
C
C
D
DH
F
H
F
D

6
Step 2
Attach GX 2 to previous subassembly C
and Dwith Z.
Repeat the same step for remaining parts
G and the other subassembly Cand D.
X 12
The slat holes on G should
be facing upward.
3
D
C
F
G
G
C
D
C
G

7
Step 3
Attach Sto Dand Tto Cwith X.
Repeat the same step for the other
subassembly Cand D.
X 12
1
C
C
D
D
T
S
T
C
S
D

8
Step 4
Screw Yinto A and Xinto B, leave half
of the thread exposed .
X 4
1
X 4
2
Do not completely
tighten the BOLTS,
leave half of thread
exposed.
2
A
B
B
A
1

9
Step 5
Hang Cand Don Aand B as illustrated,
don't completely tighten the bolts until
STEP 9 is completed.
A
C
C
DD
B
AC
T

10
Step 6
Attach N to Zwith \.
Repeat this step for all remaining legs Z.
X 4
5
X 4
N
Z