Dorel Home Products DA2023169 User manual

DO NOT RETURN TO THE STORE!
If parts are missing or damaged,we will gladly shipyour
replacementparts free ofcharge.
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
B34DA202326900
Date ofPurchase
A.N. -2020/7/16
Lot Number (TAKEN FROM CARTON)
Thank you for purchasing from DHP!
THIS INSTRUCTIONBOOKLET CONTAINSIMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTUREREFERENCE.
1
© 2014 Dorel Home Products All RightsReserved
Weight Limit: 400Lb / 102 Kg
DA2023169 (BLACK), DA2023269 (GRAY)
2 SEATER SOFA

Saturday
Sunday
Contact Us!
For help with assembly, identifying parts, productinformationor to order parts,
please contactus:
[e-mail]
1-800-267-1739
Monday toFriday 9 am to 9 pm (EasternTime)
DHP Consumer Services
12345 Albert Hudon, Suite 100,
Montreal, Quebec H1G3L1
Read Before BeginningAssembly
●Work in a spacious area and near where the unit will be used, preferably on a
carpet,or usea pieceof the cardboardpackagingto protectyour floorand product.
●Make sure all parts are included. Most parts are labeled or stampedon the raw
edge.
●Read each step carefully. It is very important that each step of the instructions is
performed in the correct order. If these steps are not followed in sequence, assembly
difficultieswill occur.
●This productmay containsmall components. Please ensurethat they are kept
away from small children.
●This productis designed for home use and is notintended for commercial use.
Limited 1 year Warranty
DHP warrants this productto be free from defectsin materialand workmanship
and agrees to remedy any such defect. This warranty covers one year from the
date of original purchasefrom authorized retailers. This is solely limited to the
repair or replacement of defective parts and assembly labor isnot included.
This warranty does not apply to any productwhich has been improperlyassembled,
subjectedto misuseor abuseor which has been alteredor repaired in any way.The
warranty does not cover wearing, tearing, fading or splitting of the fabric (where
applicable). Liability for consequential damages is excluded to the extent exclusion is
permitted by law. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state or province toprovince.
To obtain warranty service, purchaser must present original bill of sale.
Components repaired or replaced are warranted through the remainder of the
original warranty period only. The defective components will be repaired or
replaced without charge, subject to the termsand conditions described above.
Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and
Canada.
10 am to 6:30 pm (EasternTime)
11 am to 7 pm (EasternTime)
DO NOTuse
powertools
2
1h
This product is shippedin
1 carton

PARTS
3
A
B
C
D
E
G

IMPORTANT:
•Each part has uniquepart number. Please referencethe appropriate part number when contacting customerservice for replacement parts.
•Beforethrowingany packaging, pleaseverify all contentsand makesure you have receivedall the parts listedabove!
PART
LABELS DA2023169
(Black) DA2023269
(Gray)
A
B
C
D
E
F
GArmrest B and Armrest C are packed insideSeatA.
PARTS LIST
Seat
1PC Armrest 1PC Armrest 1 PC
Back
1 PC Wing 1 PC Wing 1 PC Leg 4 PCS
4
A B C
DEFG
A
T628750
T628780
T628760
T628770
T628810
T628790
T628800
T628820
T628850
T628830
T628840
T628880
T628860
T628870

Please do not completely tighten all the hardware,
until the entire assembly is complete, unless
otherwise indicated in the step-by-step instructions.
The screw(s), bolt(s) to be used at each step are
shown in actualsize in thelower right corner ofthe
page.
HardwarePack
Hardware Pack : TDA2023169-00
HARDWARE LIST
Plastic Washer M10
X 4
5
1

Step1
6
Carefully unpack parts/hardware from storage
of seat body and place on a clean flat
surface.
A

Step2
7
Place both arms (B), (C) as shown below,
secure two legs (G) and plastic washer (1) into
pre-drilled holes on the bottom of arms. Please
do not overtighten.
G
G
1
1
B
C

Step3
8
Carefully lift and turn assembled arms (B), (C)
onto its legs.
Attach seat (A) to right arm (B) and left arm (C)
by inserting the metal brackets on seat (E) into
the metal glides on right arm (B) and left arm
(C) as shown below. Ensure it is correctly
placed.
B
C
A

Step4
9
Insert both backrest wing (E), (F) metal plates
to both sides of back (D).
Ensure it is correctly placed.
E
F
D

Step5
10
Insert backrest with ear piece metal plates to
both arms as shown below.
Ensureit is correctly placed.
C
B
E
D
F
A
G