Dorel Living DA7359 User manual

Model Number: UPC Code: Color:
DA7359
0-65857-17273-7 Rustic Gray
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our
customer service department. We will replace the part FREE of charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
5-PC Wood & Metal Dining Set
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with
quality, convenience and style in mind. We trust it will provide you with many years of exceptional
comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece
by taking a few minutes to go through this booklet. It contains important information on our
warranty and care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the
model number ready when calling our toll free number 1-800-295-1980 or emailing us at
[email protected] .
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.

*
*
* A Phillips head screw driver is not included.
*
*
*
*
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer
service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
NOTES:
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
Estimated assembly time: 45 minutes.
CARE AND CLEANING
LIMITED WARRANTY
Check bolts/screws periodically and tighten them if necessary.
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any
such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only
upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included. This warranty does not apply to any product
which has been improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also have other rights which
vary from State to State.
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used
occasionally to clean the surface. Dry immediately and buff lightly, following the grain. Avoid using harsh
cleaners and abrasive products.
Use coasters to prevent the formation of moisture rings and trivets to protect from hot items. Cover
extension leaves (if applicable) with a soft protective fabric before storing. Do not slide objects across the
surface - always lift them.
MAINTENANCE
Ensure all parts and components are present before beginning assembly.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
Assemble on a soft, smooth surface to prevent damage to product finish.

36 PCS
32 PCS
Ø1/4"*3/4"
M4
Φ22×1.0mm
Ø13.5×2.5mm
SCREW
ALLEN KEY
Ø5/32"*5/8"
3
5-PC Wood & Metal Dining Set
DA7359
HARDWARE LIST
1
2
BOLT
BOLT
Ø1/4"*1/2"
4
8 PCS
8 PCS
Ø5/16"×14mm×5.7mm
M14
16 PCS
1 PC
5
6
7
8
FLAT WASHER
SPRING WASHER
NUT
WRENCH
8 PCS
1 PC

G
8 PCS
FRONT STRETCHER
4 PCS
TABLE TOP
H
SIDE STRETCHER
1 PC
TABLE LEG
4 PCS
SEAT FRAME
4 PCS
FRONT LEG
8 PCS
SEAT BOARD
4 PCS
5-PC Wood & Metal Dining Set
DA7359
PARTS LIST
A
BACK FRAME
4 PCS
B
C
E
F
D

STEP 1
5-PC Wood & Metal Dining Set
DA7359
Attach seat frame (B) to the back frame (A) with bolts (1) using Allen key
(4).
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in
the following steps.
4

Attach front legs (C) to the seat frame (B) with bolts (1) using Allen key (4).
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in
the following steps.
5-PC Wood & Metal Dining Set
DA7359
STEP 2
4

STEP 3
5-PC Wood & Metal Dining Set
DA7359
Attach side stretchers (D) to the seat frame (B), back frame (A) and front legs
(C) with bolts (2) using Allen key (4).
Attach front stretcher (E) to the seat frame (B) and front legs (C) with bolts
(1 & 2) as shown. Use Allen key (4) to tighten the bolts.
NOTE: Make sure the table legs rest evenly on the floor before tightening the
bolts. Tighten all the bolts installed in previous steps with Allen key (4).
4
4
4

STEP 4
Repeat step 1 to 4 to assemble the other 3 chairs.
NOTE: Phillips head screws will make it's own holes.
5-PC Wood & Metal Dining Set
DA7359
Attach seat board (F) to the seat frame (B) with screws (3).
Use a Phillips head screw driver (not included) to tighten the screws.

STEP 5
5-PC Wood & Metal Dining Set
DA7359
With the help of another person, place table top (G) upside down on a clean
smooth surface. Attach table legs (H) to the table top (G) with flat washers (5),
spring washers (6) and nuts (7).
Use wrench (8) to tighten the nuts.

That's it! You've finished assembling your dining set.
5-PC Wood & Metal Dining Set
DA7359
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace the
part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Table Top
Maximum Weight -
50 LBS