Dorel Living DA7830 User manual

Model Number: UPC Code:
DA7830
0-65857-17971-2
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Metal Geometric Etagere
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
Congratulations on your latest furniture purchase! Dorel Living furniture has been
developed with quality, convenience and style in mind. We trust it will provide you with
many years of exceptional comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new
furniture piece by taking a few minutes to go through this booklet. It contains important
information on our warranty and care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday
to Friday 8am to 5pm (EST) to answer any question you may have. For faster service,
always have the model number ready when calling our toll free number 1-800-295-1980
or emailing us at [email protected] .
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.

* To avoid unnecessary damage, when levelers have been extended, DO NOT drag across
surface when moving. Be sure to lift and carry the item to its location.
* Estimated assembly time: 60 minutes.
WARNING
Serious or fatal crushing injuries can occur from furniture tipover. To help prevent tipover:
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such
defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon
presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. This
warranty gives you specific legal rights and you may also have other rights which vary from State to State.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on
top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to
clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to
sunlight and extreme changes in temperature and moisture can damage wood furniture.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Canada H1G 3L1
E-MAIL: [email protected]
* Install tipover restraint provided.
* Place heaviest items in the bottom drawers or shelves.
* Assemble on a soft, smooth surface to prevent damage to the product finish.
* Use the wall safety strap provided to secure the unit to the wall.
* A Phillips head screw driver is not included.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly will require two people.
NOTES
* Ensure all parts and components are present before beginning assembly.
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
CUSTOMER SERVICE
If you have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
Customer Service Department No. 413

2
4
Ø8*2.5mm
3
5
2 PCS
M4
SAFETY STRAP
ALLEN KEY
SUCTION CUP
1 PC
18 PCS
36 PCS
Metal Geometric Etagere
DA7830
Ø1/4"*1/2"
Ø5/32"*1/2"
BOLT
SCREW
HARDWARE LIST
8 PCS
1

1PC
2 PCS
2PCS
A
D
G
B
E
H
2PCS
4 PCS
3 PCS
BOTTOM PANEL
SHELF FRAME
STRETCHER
I
1 PC
1 PC
1 PC
UPPER STRETCHER
MIDDLE STRETCHER
GLASS SHELF
F
Metal Geometric Etagere
DA7830
LEFT SIDE PANEL
RIGHT SIDE PANEL
TOP PANEL
PARTS LIST
C
2 PCS
2 PCS
J
K
WOOD SHELF PANEL
STRETCHER

STEP 1:
Metal Geometric Etagere
DA7830
Attach stretcher (I) to shelf frame (H) with bolts (1) using the Allen key (3) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.
1

STEP 2:
Metal Geometric Etagere
DA7830
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.
Attach stretcher (K) to shelf frame (H) with bolts (1) using the Allen key (3) as shown.
1

STEP 3:
Metal Geometric Etagere
DA7830
Attached top panel (C) to left side panel (A) with bolts (1) using the Allen key (3) as
shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.
1

STEP 4:
Metal Geometric Etagere
DA7830
Attach upper stretchers (D) to left side panel (A) with bolts (1) using the Allen key (3) as
shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.
1

STEP 5:
Metal Geometric Etagere
DA7830
Attach middle stretchers (E) to left side panel (A) with bolts (1) using the Allen key (3) as
shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.
1

STEP 6:
Metal Geometric Etagere
DA7830
Attach bottom panel (G) to left side panel (A) with bolts (1) using the Allen key (3) as
shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.
1

STEP 7:
Metal Geometric Etagere
DA7830
Attach right side panel (B) to the assembled unit ( done in previous steps) with bolts
(1) using the Allen key (3) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the
following steps.
1

STEP 8:
Metal Geometric Etagere
DA7830
Attach the assembled unit ( done in step 1) to middle stretchers (E) with bolts (1)
using the Allen key (3) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the
following steps.
1

STEP 9:
Metal Geometric Etagere
DA7830
Attach assembled unit ( done in step 2) to middle stretchers (E) with bolts (1) using Allen key
(3) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following
steps.
1

STEP 10:
Make sure shelves (J) are properly placed before securing them to shelf frames (H).
Metal Geometric Etagere
DA7830
Turn the unit upright. Make sure all the parts are flush before securing the bolts (1).
Tighten all the bolts previously installed.
Attach wood shelf panels (J) to shelf frames (H) with screws (2) using a Phillips head
screwdriver (not included).
2

STEP 11:
Put the glass shelves (F) onto the shelf frames as shown.
DA7830
Metal Geometric Etagere
Place suction cups (4) to the metal support on the frame as shown.
4

NOTE:
The holes on the corner of the top panel are for safety straps usage.
Metal Geometric Etagere
DA7830

NOTE - The etagere is equipped with adjustable levelers. Rotate the
adjustable levelers clockwise or counterclockwise to make sure the etagere
rest evenly on the floor.
Metal Geometric Etagere
DA7830

That's it ! You've finished assembling your etagere.
Metal Geometric Etagere
DA7830
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products
and/or products heavier than the maximum weights indicated may
result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service department.
We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
20LBS
20LBS
10LBS
20LBS
10LBS
40LBS
Product
Maximum
Weights

MODEL #: DA7830
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service
Customer Service Phone Number 1-800-295-1980
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: [email protected]

Furniture Wall Safety Strap
A B C D
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
Step 1:
Step 2:
Step 3:
REMOVE THE SCREW FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
ATTACH A MOUNTING BRACKET (A) SECURELY TO THE BACK EDGE OF THE FURNITURE USING THE
SHORT SCREW (D), THROUGH THE SMALLER HOLE
Step 4:
LOCATE THE OTHER MOUNTING BRACKET (A) ON THE WALL OVER A WALL STUD AND 2 INCHES BELOW
THE MOUNTING BRACKET SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE WALL STUD USING
THE LONG SCREW (C) PROVIDED, THROUGH THE SMALLER HOLE.
PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN LINE. LACE
THE END OF THE SAFETY WALL STRAP (B) THROUGH THE LARGER HOLE IN EACH MOUNTING BRACKET
(A). BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END THROUGH THE LOCKING END AND DRAW
IT THROUGH UNTIL ALL SLACK IS REMOVED.
CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE
FURNITURE MAY TIP OVER. PLEASE INSTALL THE SAFETY
WALL STRAP BEHIND THE FURNITURE TO ENSURE SAFETY.
MOUNTING BRACKET
4 PCS
SAFETY WALL STRAP
2 PCS
LONG SCREW
2 PCS
SHORT SCREW
2 PCS
A
B
A
B