Dorel Living DL1008-7 User manual

Model Number: UPC Code: Color:
DL1008-7 0-65857-17171-6 Mocha
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
NIGHTSTAND
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with
quality, convenience and style in mind. We trust it will provide you with many years of exceptional
comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by
taking a few minutes to go through this booklet. It contains important information on our warranty and
care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the model
number ready when calling our toll free number 1-800-295-1980 or emailing us at [email protected] .
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*A Phillips head screw driver is not included.
*
DO NOT use power tools.
*
* Assembly will require two people.
*
If you have any questions about this product, contact our customer service
representative first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Estimated assembly time: 60 minutes.
MAINTENANCE
E-MAIL: [email protected]
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the
product model number, color and a detailed description of the part.
Customer Service Department No. 413
Dorel warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has
been improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be
used occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
NOTES:
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Do not use the unit if it is damaged or broken.
CALL 1-800-295-1980

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10
LARGE CAM BOLT
16 PCS
SMALL WOOD DOWEL
4 PCS
LARGE WOOD DOWEL
12 PCS
FLAT HEAD SCREW
4 PCS
HANDLE
1 PC
SMALL CAM LOCK
4 PCS
Ø4 * 25 mm
ROUND HEAD SCREW
16 PCS
Ø3 * 15 mm
Ø8 * 30 mm
Ø6 * 20 mm
Ø7 * 36 mm
Ø13 * 10 mm
Ø15 * 11 mm
LARGE CAM LOCK
16 PCS
Ø7 * 28 mm
SMALL CAM BOLT
4 PCS
Nightstand
DL1008-7
Ø5/32" * 19mm
BOLT
2 PCS

PARTS LIST
A B C D
E F G H
I J K L
M N
LEFT DRAWER SIDE
1 PC
Nightstand
DL1008-7
SHELF
1 PC
BACK BOTTOM RAIL
1 PC
BACK PANEL
1 PC
DRAWER FRONT
1 PC
BACK TOP RAIL
1 PC
RIGHT SIDE FRAME
1 PC
TOP PANEL
1 PC
DRAWER BOTTOM
1 PC
RIGHT DRAWER SIDE
1 PC
DRAWER BACK
1 PC
LEFT SIDE FRAME
1 PC
FRONT TOP RAIL
1 PC
FRONT BOTTOM RAIL
1 PC

STEP 1
Nightstand
DL1008-7
Insert large cam bolts (4) into the left side frame (B) and right side frame (C) as shown.

STEP 2
Nightstand
DL1008-7
Insert large cam locks (3) into the rails (E,F,G and M) and shelf (D).
Insert large wood dowels (1) into the left side frame (B) and right side frame (C).
Secure rails (E,F,G and M) and shelf (D) to the left side frame (B) and right side frame (C)
by rotating the large cam locks (3) 1/2 turn clockwise using a Phillips head screwdriver
(not included).

STEP 3
Nightstand
DL1008-7
Insert large cam bolts (4) into the top panel (A).

STEP 4
Nightstand
DL1008-7
Insert large wood dowels (1) into the left side frame (B) and right side frame (C).
Insert large cam locks (3) into the left side frame (B) and right side frame (C).
Fasten top panel (A) to the assembled unit by rotating large cam locks (3) 1/2-turn
clockwise using a Phillips head screwdriver (not included).

STEP 5
Nightstand
DL1008-7
Attach back panel (N) to the assembled frame with round head screws (10).
Use a Phillips head screwdriver (not included) to tighten the screws.

STEP 6
Nightstand
DL1008-7
Insert small cam bolts (6) and small wood dowels (2) into the front drawer panel (L).
Insert small cam locks (5) into the left drawer side (H) and right drawer side (I).
Attach drawer sides (H & I) to the front drawer panel (L). Secure the drawer sides by
rotating small cam locks (5) 1/2-turn clockwise using a Phillips head screwdriver (not
included).
Slide the drawer bottom (K) into the grooves of drawer sides (H & I) and front drawer panel
(L).