Dorel Living DL1010TB-10 User manual

Model Number: UPC Code: Color:
DL1010TB-10 0-65857-17159-4 White
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
Trundle For Twin Bed / Daybed
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with
quality, convenience and style in mind. We trust it will provide you with many years of exceptional
comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by
taking a few minutes to go through this booklet. It contains important information on our warranty and
care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the model
number ready when calling our toll free number 1-800-295-1980 or emailing us at [email protected] .
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*A Phillips head screw driver is not included.
*DO NOT use power tools.
*
* Assembly will require two people.
*
Dorel warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to
the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any
way. This warranty gives you specific legal rights and you may also have other rights which
vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture
can damage wood furniture.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
NOTES:
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Do not use the unit if it is damaged or broken.
CALL 1-800-295-1980
If you have any questions about this product, contact our customer service representative
first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Estimated assembly time: 45 minutes.
MAINTENANCE
E-MAIL: [email protected]
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413

HARDWARE LIST
1 2 3
4 5 6
7 8 9
Ø4 X 15mm
ROUND HEAD SCREW
16 PCS
CASTER
4 PCS
Trundle For Twin Bed / Daybed
DL1010TB-10
Ø8 X 30mm
LARGE WOOD DOWEL
8 PCS
Ø5/32" X 1"
Ø1/4" X 30mm
Ø1/4" X 35mm
Ø4mm X 32mm
FLAT HEAD SCREW
10 PCS
ALLEN KEY
1 PC
LONG BOLT
4 PCS
SHORT BOLT
8 PCS
KNOB
4 PCS
SMALL BOLT
4 PCS

PARTS LIST
A B C
D E F
G H
PANEL
2 PCS
SLAT
5 PCS
SLAT
2 PCS
BACK PANEL
1 PC
RIGHT SIDE PANEL
1 PC
LEFT SIDE PANEL
1 PC
FRONT PANEL
1 PC
PANEL
2 PCS
Trundle For Twin Bed / Daybed
DL1010TB-10

STEP 1
Trundle For Twin Bed / Daybed
DL1010TB-10
Insert wood dowels (9) into the side panels (C & D).
Attach side panels (C & D) to front panel (A) and back panel (B) with bolts (1). Use Allen key
(4) to tighten the bolts (1).
Attach knobs (7) to the front panel (A) with bolts (8).
Use a Phillips head screwdriver (not included) to tighten bolts (8).