Dorel DA6514 User manual

Model No:
DA6514
KEEP FOR FUTURE REFERENCE.
Date of purchase:
_______ / _______ / _______
Lot number:
_____________________________________
(TAKEN FROM CARTON)
5-PC TRADITIONAL
HEIGHT DINING SET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
INSTRUCTION MANUAL
UPC CODE:
0-65857-16881-5
NOTE:
THIS INSTRUCTION BOOKLET
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES:
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to product finish.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Phillips head screw driver is not included.
DO NOT use power tools.
Assembly will require two people.
Estimated assembly time: 30 minutes.
CAUTION: Adult assembly required.
CARE AND CLEANING
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be used
occasionally to clean the surface. Dry immediately and buff lightly, following the grain. Avoid using
harsh cleaners and abrasive products.
Use coasters to prevent the formation of moisture rings and trivets to protect from hot items. Cover
extension leaves (if applicable) with a soft protective fabric before storing. Do not slide objects across the
surface - always lift them.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy
any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid
only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included. This warranty does not apply to any product
which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired
in any way. This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.

ALLEN KEY
4 PCS
16 PCS
7
8
1 PC
Ø5/16" X 2-1/4"
BOLT
ALLEN WRENCH
16 PCS
1 PC
9
Ø5/16" X 1-1/2"
Ø5/16" X 3"
BOLT
BOLT
36 PCS
44 PCS
5
6
5-PC TRADITIONAL HEIGHT DINING SET
DA6514
8 PCS
8 PCS
HARDWARE LIST
1
2
Ø5/16" X 23MM
NUT
FLAT WASHER
3
4
FLAT WASHER
SPRING WASHER
Ø5/16" X 19MM
Ø5/16" X 11MM
END PANEL
RIGHT END PANEL (A-R) 1 PC
MATTRESS SUPPORT 1PCEND PANEL
LEFT END PANEL (A-L) 1 PC

8 PCS
CHAIR LEG
E
5-PC TRADITIONAL HEIGHT DINING SET
DA6514
TABLE TOP
TABLE LEG
4 PCS
SEAT FRAME
A
1 PC
PARTS LIST
BACK FRAME
B
4 PCS
C
D
4 PCS

5-PC TRADITIONAL HEIGHT DINING SET
With the help of another person, place table top (A) upside down on a clean, smooth surface.
Attach table legs (B) to table top (A) with nuts (1), spring washers (4) and flat washers (2).
Use Allen Wrench (8) to tighten nuts (1).
STEP 1
DA6514
STEP 3STEP 4STEP 5STEP 6STEP 7STEP 8STEP 9STEP 10STEP 11
B
B
⑧

5-PC TRADITIONAL HEIGHT DINING SET
NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the
following step.
Attach seat frame (D) to back frame (C) with bolts (6), spring washers (4) and flat washers (3)
through the corners of seat frame (D).
Secure the center of seat frame (D) to back frame (C) with bolt (5), spring washer (4) and flat
washer (3).
Use Allen key (9) to install the bolts.
DA6514
STEP 2
5
6

5-PC TRADITIONAL HEIGHT DINING SET
Attach the legs (E) to seat frame (D) with bolts (7), spring washers (4) and flat washers (3).
Use Allen key (9) to tighten the bolts.
NOTE: Tighten all the bolts installed in previous steps.
Repeat steps 2 and 3 to assemble the remaining chairs.
DA6514
STEP 3
7

That's it ! You've finished assembling your dining set.
DA6514
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
5-PC TRADITIONAL HEIGHT DINING SET
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Product
Maximum
Weight
100 lbs

MODEL #: DA6514
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Email: [email protected]
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Customer Service Representative Mailing Address:
Customer Service
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1