Dorel DA6341HFQ-MAC User manual

Model No:
UPC CODE:
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
_____________________________________
Date of purchase:
_______ / _______ / _______
QUEEN HEADBOARD
DOREL ASIA
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
DA6341HFQ-MAC Chocolate
DA6341HFQ-MAD Grey
0-65857-16695-8 Chocolate
0-65857-16696-5 Grey

*
*
* Read all instructions before use.
*
*
*
*
*
*The bed frame is not included and must be purchased separately.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly and handling will require two people.
Estimated assembly time: 10 minutes.
Phillips head screwdriver is not included.
E-MAIL: [email protected]
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to product finish.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. Any wearing, tearing or
fading of the fabric is not covered under the warranty. This warranty gives you specific legal
rights and you may also have other rights which vary from State to State.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
CARE AND CLEANING
Dust regularly with a soft, dry cloth to prevent soil build-up. Wipe away spills immediately to
prevent staining. Use a cloth dampened with water or a professional product to clean the fabric.
Always test an inconspicuous area first. Allow upholstery to dry and brush lightly. Keep away
from heat to avoid glazing, melting or scorching.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.

HARDWARE LIST
1 2 3
Ø5/16" X 50mm
4 5
Ø5/16" X 70mm
7
Ø8mm
NUT
4 PCS
910 11
QUEEN HEADBOARD
4 PCS
Ø4 X 60mm
Ø19 X 1.8mm Ø12.5 X 1.2mm
SPRING WASHER
10 PCS 10 PCS
Ø16 X 1.8mm
Ø5mm
HEX SOCKET HEAD BOLT
6 PCS
FLAT WASHER
4 PCS
HEX SOCKET HEAD BOLT
4 PCS
FLAT WASHER
SCREW
8 PCS 1 PC 1 PC
Ø5/16" X 125mm
FLAT WASHER ALLEN KEY WRENCH
HEX SOCKET HEAD BOLT
4 PCS
Ø22 X 1.8mm
8
6
DA6341HF Q-MAC / DA6341HF Q-MAD

PARTS LIST
A B
B1-Left B2-Right
C
QUEEN HEADBOARD
FOOT
HEADBOARD BODY HEADBOARD WING
1 PC 2 PCS
2 PCS
NOTE: HEADBOARD WINGS (B1 & B2) AND FEET (C1 & C2)
ARE PACKED INSIDE THE HEADBOARD BODY (A). PULL
BACK THE FABRIC LINING BEHIND THE HEADBOARD
BODY TO COLLECT ALL PARTS.
DA6341HF Q-MAC / DA6341HF Q-MAD

STEP 1:
Place all parts on a clean, smooth surface.
with flat washers (2), spring washers (3) and hex socket head bolts(1). Use Allen Key (10) to
tighten the bolts.
QUEEN HEADBOARD
Pull back the fabric lining underneath headboard body (A).
Attach left headboard wing (B1) and right headboard wing (B2) to the headboard body (A)
①②③
A
B1
B2
10
1 3 2
DA6341HF Q-MAC / DA6341HF Q-MAD

STEP 2:
Attach the feet (C1 & C2) to the headboard body (A) with flat washers (2) and hex socket head
bolts (4). Use Allen Key (H10) to tighten the bolts.
Use a screwdriver (not included) to tighten the screws.
QUEEN HEADBOARD
Attach the feet (C1 & C2) to the headboard wings(B1 & B2) with flat washers (5) and screws(6) 6
④
②
⑤
C1
10
4
C2
B2
B1
6
A
DA6341HF Q-MAC / DA6341HF Q-MAD

For a Queen Size Bed,
attach the bed frame to the
outer holes.
For a Full Size Bed,
attach the bed frame to the
inner holes.
wrench (11) to tighten the nuts (8).
NOTE: THE BED FRAME IS NOT INCLUDED AND MUST
BE PURCHASED SEPARATELY. THE FOLLOWING
ILLUSTRATIONS ARE FOR REFERENCE ONLY.
QUEEN HEADBOARD
Attach the bed frame (purchased separately) to bed posts using bolts (7), spring washers (3),
flat washers (9) and nuts (8). Use Allen Key (10) to tighten bolts and use the open end
③
10
7
3
9
9
8
11
8
9
7
DA6341HF Q-MAC / DA6341HF Q-MAD

That's it ! You've finished assembling your headboard.
QUEEN HEADBOARD
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
Dust regularly with a soft, dry
cloth to prevent soil build-up.
Wipe away spills immediately
to prevent staining. Use a cloth
dampened with water or a
professional product to clean
the fabric. Always test an
inconspicuous area first. Allow
upholstery to dry and brush
lightly. Keep away from heat
to avoid glazing, melting or
scorching.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
DA6341HF Q-MAC / DA6341HF Q-MAD

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: [email protected]
MODEL#: DA6341HF Q-MAC / DA6341HF Q-MAD