DoubleSight DS-15xx User manual

USER’S MANUAL
DoubleSight
™
Dual 15” LCD Monitor
(Model: DS-15xx Series)
For the latest updates and more information, visit our website at
www.doublesight.com.

Trademarks
DoubleSight, DoubleSight Displays, the DoubleSight logo, and other DoubleSight trademarks are
the property of DoubleSight Displays, LLC and may be registered in the United States and/or other
countries.
Microsoft, Windows, and the Microsoft logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries. Apple and Macintosh are trademarks or
registered trademarks of Apple Computer, Inc. in the United States and/or other countries. Energy
Star is a U.S. registered trademark. All other product names, logos, designs, or titles mentioned
within this manual may be trademarks of their respective owners.
Disclaimer
DOUBLESIGHT DISPLAYS, LLC MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, REGARDING THIS MANUAL AND THE INFORMATION CONTAINED HEREIN.
DOUBLESIGHT DISPLAYS, LLC HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE
AND UNDER NO CIRCUMSTANCES SHALL DOUBLESIGHT DISPLAYS, LLC BE LIABLE
FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED
ON TORT, CONTACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH
THIS MANUAL, INFORMATION CONTAINED HEREIN, OR THE USE THEREOF.
Copyright © 2003-2004 DoubleSight Displays, LLC. All rights reserved. This manual may
not be copied, photocopied, reproduced, translated, or converted to any electronic form in
whole or in part without prior written consent of DoubleSight Displays, LLC.
DoubleSight Displays, LLC reserves the right to make any modification to this manual or the
information contained herein at any time without notice. DoubleSight Displays, LLC assumes no
responsibility for errors or omissions in this manual. For the latest modifications and more
information, visit our website at
http://www.doublesight.com .
Third Edition: January 2004
DoubleSight Displays, LLC
1440 North Harbor Blvd., Suite 305
Fullerton, CA 92835, U.S.A.
TEL: 1-877-TwoLCDs (1-877-896-5237) (U.S. only)
E-mail: [email protected]

i
Contents
Contents ......................................................... i
Notice to Users .............................................. 1
Important Safety Instructions ..................................... 1
Important Notices Regarding Power Cord...................... 1
For the United States and Canada............................ 2
For European Countries .......................................... 2
For The United Kingdom ......................................... 2
CE Conformity for Europe ....................................... 3
Additional Safety Information...................................... 4
Power Connection.................................................. 4
Installation and Maintenance................................... 4
Using the Tilt & Swivel ........................................... 5
Transporting the Monitor ........................................ 5
Introduction .................................................. 7
DoubleSight Features................................................. 7
A Clear View to Productivity .................................... 7
Cost-Effective Solution to Display Continuity ............. 7
”Smart Control” Technology.................................... 7
Stylish, Yet Sturdy Design ...................................... 8
Contents in the Box ................................................... 8
DoubleSight Monitor Overview..................................... 9
Front ................................................................... 9
Rear ...................................................................10
Side....................................................................10

User’s Manual
ii Contents
Setting Up Your Monitor............................... 11
Connecting the Display to Base Stand .........................11
Connecting the Monitor to a Computer ........................12
Setting Up Computer Display Properties ......................15
For Microsoft Windows Users..................................15
For Apple Macintosh Users .....................................16
AUTO Setting.......................................................16
Removing Base Stand from the Display .......................17
Key Function Controls.................................. 19
Working with OSD Functions ......................................19
Source Select...........................................................20
Brightness...............................................................21
Contrast..................................................................22
Color ......................................................................22
User Mode ...........................................................23
Position...................................................................24
Image.....................................................................25
Misc Menu ...............................................................26
Reset..................................................................26
Language ............................................................26
OSD Position........................................................27
System Information..............................................27
Recommended Use ...................................... 29
Placement ...............................................................29
Ergonomics..............................................................30
Technical Information.................................. 31
Product Specifications (Model: DS-15xx) .....................31

User’s Manual
www.doublesight.com iii
Display................................................................31
Input Signals .......................................................31
Connections.........................................................31
User Controls.......................................................32
Power .................................................................32
Operating Conditions.............................................32
Physical Characteristics .........................................32
Application Video Timing............................................33
VESA Modes.........................................................33
IBM Modes...........................................................33
MAC Modes..........................................................34
Troubleshooting & Support.......................... 35
Warning Messages....................................................35
Troubleshooting Checklist..........................................36
Support Options .......................................................37
Returning for Repair Service ......................................38
Limited Warranty......................................... 39
Regulatory Information ............................... 43
FCC Compliance .......................................................43
User Information ..................................................44

User’s Manual
iv Contents
(This page is left blank intentionally)

1
Notice to Users
Important Safety Instructions
Please carefully read the following safety instructions as they are
designed to reduce the risk of electric shock, personal injury or
damage to the LCD monitor.
WARNING
This device must be operated with the original power supply, part
number: HJC HASU05F.
CAUTION: The socket-outlet should be installed near the equipment
and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use
the appropriate AC cord that is certified for the individual country.
Some examples are listed below:
USA ........... UL Switzerland ...... SEV
Canada ...... CSA Britain ............. BASE/BS
Germany .... VDE Japan .............. Electric Appliance Control Act
Important Notices Regarding Power Cord
The power cord set for this unit has been enclosed, was selected
according to the country of destination and must be used to prevent
electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed. The

User’s Manual
2 Notice to Users
female receptacle of the cord set must meet IEC-60320 requirements
and may look like (Figure A1 below):
For the United States and Canada
In the United States and Canada, the male plug is a NEMA5-15 style
(Figure A2), UL Listed, and CSA Labeled. For units that are mounted
on a desk or table, type SVT or SJT cord sets may be used. For units
that sit on the floor, only SJT type cord sets may be used. The cord
set must be selected according to the current rating for your unit.
Please consult the table below for the selection criteria for power
cords used in the United States and Canada.
Code Type Size of Conductors in Cord Maximum Current Rating
of Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT 18 AWG
17 AWG
10 Amps
12 Amps
For European Countries
In Europe, you must use a cord set which is appropriate for the
receptacles in your country. The cord set is HAR-certified, and
includes a special mark that appears on the outer sheath or on the
insulation of one of the inner conductors.
For The United Kingdom
For your safety please read the following text carefully. If the fitted
molded plug is unsuitable for the socket outlet, then the plug should
be cut off and disposed of safely. There is a danger of severe
electrical shock if the cut off plug is inserted into an appropriate
socket. If a new plug is to be fitted, please observe the wiring code as
shown below. Please consult a qualified electrician if you have any
questions.

User’s Manual
www.doublesight.com 3
WARNING
This appliance must be grounded.
IMPORTANT: The wires in the main lead are colored in accordance
with the following codes:
Green-and-Yellow: Grounded
Blue: Neutral
Brown: Live
If the colored wires of the main lead of this appliance do not
correspond with the colored markings identifying the terminals in
your plug, proceed as follows:
•The wire which is colored GREEN-AND-YELLOW must be
connected to the terminal in the plug which is marked by the
letter E or by the Earth symbol (for grounded) or colored GREEN
or GREEN-AND-YELLOW.
•The wire which is colored BLUE must be connected to the
terminal in the plug which is marked with the letter N or colored
BLACK. The wire which is colored BROWN must be connected
to the terminal in the plug which is marked with the letter L or
colored RED.
If you have any questions concerning the proper power cord to use,
please consult the dealer where you purchased the product.
CE Conformity for Europe
This device complies with the requirements of the
ECC directive 89/336/EEC as amended by 92/31/EEC
and 93/68/EEC Art.5 with regard to “Electromagnetic
Compatibility”, and 73/23/EEC as amended by
93/68/EEC Art.13 with regard to “Safety”.

User’s Manual
4 Notice to Users
Additional Safety Information
To prevent fire or shock hazards, do not expose this monitor to rain,
moisture or liquids. Use only a properly grounded plug and receptacle.
Do not use this unit’s polarized plug with an extension cord receptacle
or other outlet unless the prongs can be fully inserted.
DO NOT OPEN THE MONITOR. Opening or removing the monitor
covers may expose the user to dangerous shock hazards or other risks.
There are no user-serviceable parts inside. Refer all servicing needs
to an authorized reseller.
Power Connection
•Only use the correct power cord for your local voltage.
•Use an accessible outlet close to the monitor.
•Damage to the power cord may cause shock or fire.
•Do not bend the plug and wire nor place any heavy objects on the
power cord to avoid damage, electric shock or fire.
•Disconnect the monitor’s power cord from the power supply
outlet if:
-The cord becomes damaged or frayed
-The monitor has been dropped or damaged
-You will not use the monitor for an extended period
-A distinct change in performance indicates a need for
servicing
-During storms or lightening.
•All cables connected to this monitor must be shielded and
grounded. Operation with cables that are not shielded and
grounded may result in interference to radio and television
reception.
Installation and Maintenance
•Do not place the monitor on an unstable surface or table, or drop
the monitor while moving it.

User’s Manual
www.doublesight.com 5
•Do not cover or block the ventilation ports on the rear of the
monitor to avoid breakdown or fire.
•Do not install the monitor near heat sources, such as radiators or
air ducts, or in locations exposed to direct sunlight, excessive dust,
mechanical vibration or shock.
•Do not place the monitor faced down to avoid damage to the
TFT-LCD surface.
•Do not clean the monitor using any abrasive materials or solvents,
such as alcohol or benzene. Clean the monitor cabinet, controls
and screen with a lint-free, non-abrasive cloth lightly moistened
with a mild detergent solution.
•Do not rub, touch or tap the surface of the screen with sharp or
abrasive items such as pens or screwdrivers to avoid scratching
the TFT-LCD surface.
•Do not insert objects of any kind into the monitor’s ventilation
slots to avoid touching dangerous voltage points, which can be
harmful or may cause electric shock, fire or equipment failure.
Using the Tilt & Swivel
Use the monitor’s tilt and swivel capability to adjust its vertical and
horizontal orientation to an appropriate position. To avoid damage,
do not force the display beyond its natural stop-position limits
(0~+20° for tilt; -45~+45° for swivel).
NOTE
Grip the top corners of the monitor with both hands and tilt to the
desired angle.
Transporting the Monitor
When transporting the monitor for repair or shipment, use the original
carton and packing materials.

User’s Manual
6 Notice to Users
(This page is left blank intentionally)

7
Introduction
Congratulations on your purchase of DoubleSight, an innovative dual
LCD monitor. DoubleSight is designed to harness your information
and computing power utilizing unique multiple monitor technology
that will enhance your viewing and productivity experience!
By connecting two 15-inch LCD monitor panels side-by-side and
using a single “smart” base stand, DoubleSight gives you large
monitor real estate in a small footprint at a very affordable price!
DoubleSight Features
A Clear View to Productivity
DoubleSight seamlessly displays as much data as a single 20-inch
monitor! You can have an instantly clear view of your programs and
documents instead of time-consuming switching between windows.
DoubleSight gives you speedy reactions to managing several sources
of information—and boosts your overall productivity by
approximately 20 to 50 percent! It’s that easy!
Cost-Effective Solution to Display Continuity
Investment in a single, large CRT or expensive LCD monitor is not
always effective. DoubleSight is designed to eliminate the wasted
desktop space and excess electricity usage typical with CRT monitors.
The powerful combination of DoubleSight’s productivity gains and
cost savings can give you a quick return on investment within weeks!
”Smart Control” Technology
DoubleSight gives you easy one-stop access for controlling dual
displays! An intuitive menu-driven on-screen display lets you select

User’s Manual
8 Introduction
how you want to set up each LCD display. DoubleSight’s multi-
screen control technology and industrial design employ a single
controlling motherboard that seamlessly manages and adjusts the
display of multiple monitors. By simply distributing or replicating
signals to both display panels, you have the ability to display a
different window on each monitor panel at the same time, or stretch
windows across two monitors so you can see more information
without scrolling. Imagine how easy it would be to use one monitor
to do research on the Web, and summarize your data in a Word
document on the other monitor panel.
Stylish, Yet Sturdy Design
DoubleSight combines a stylish appearance with a unique, light yet
sturdy design that requires a minimum of desk space. Its simplified,
slim flat design lets you choose to install DoubleSight on a desk, wall-
mount it or hang it from an office cubicle!
Contents in the Box
Your new DoubleSight monitor box*should contain the following:
•DoubleSight DS-15xx Dual LCD monitor
•Power Adapter
•Two Video Signal Cables (15-pin D-sub Type)
•Ergonomic Tilt/Swivel Base
•User’s Manual
•Quick Start Guide
* Please save your original box and packing materials for transporting or shipping
the monitor.

User’s Manual
www.doublesight.com 9
DoubleSight Monitor Overview
Front
SELECT The SELECT button is a single control function for
selecting the On-Screen Display menu of left-side panel,
right-side panel, or both panels.
SELECT
LED
Indicator
Green LEDs indicate the On-Screen Display menu’s
operational mode for left-side panel, right-side panel, or
both panels;
Amber LEDs indicate power saving mode.
MENU MENU is the main program button that opens the On-
Screen Display window and allows you to select a
function, option or value.
◄Left control navigates within the On-Screen Display or
moves the selected bar to decrease the adjustment.
►Right control navigates within the On-Screen Display or
moves the selected bar to increase the adjustment.
EXIT The EXIT button saves your settings, exits the On-
Screen Display window and returns to upper level menu.
SELECT LED Indicator POWER LED Indicator

User’s Manual
10 Introduction
AUTO The AUTO button automatically adjusts the display
settings.
POWER The POWER button turns the monitor on and off.
POWER
LED
Indicator
A green LED indicates the monitor is on.
Rear
VGA1Connects the first video signal cable
VGA2 Connects the second video signal cable
DC-IN Connects the power jack
Side
VESA-compliant mounting holes
Wall mounting holes
Base handle
Base stand

11
Setting Up Your Monitor
Prior to setting up your DoubleSight monitor, it is important to select
a location where it will be stable and protected, yet convenient to use.
You will need a flat, hard surface, such as a sturdy desk or table,
located near a power outlet.
WARNING
To allow sufficient airflow and prevent overheating, do not block the
ventilation ports located on the rear of the monitor. Do not install the
monitor near heat sources, such as radiators or air ducts, or in
locations exposed to direct sunlight, excessive dust, mechanical
vibration or shock.
Connecting the Display to Base Stand
Remove the bottom layer of foam packing material in the box and
place on a flat surface. Remove the plastic wrapper bag from the
display. Using both hands, firmly grip each outer edge of the dual
display frame and place face down on top of the foam packaging.
This surface will provide a secure position for proceeding to the next
step.

User’s Manual
12 Setting Up Your Monitor
Holding the base stand handle, insert its three prongs (located on the
handle’s reverse side) straight down into the three holes on the
display’s back silver face plate. To secure the prongs into a locked
position, push the stand forward until it connects to the display
securely. Using both hands, firmly grip the combined display with
stand and place upright on a desk with the monitor’s back panel facing
you. Please ensure that the display and base are securely connected
before moving.
Connecting the Monitor to a Computer
Locate the blue video signal adapter cables marked 1 and 2. With the
small monitor icon facing towards you, insert the blue VGA cable 1
into the monitor’s VGA-1 port (right), and then the VGA cable 2 into
the VGA-2 port (left). Tighten each of the blue screws to secure.
Next, locate the black power cable and insert it into the monitor’s DC-
IN port with the ↑arrow icon facing towards you. Connect the
opposite end into a power outlet.
Push forward