DPtech LSW5003 Series User manual

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
i
DPtech LSW5003 Series Industrial Ethernet
Switch Installation Manual

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
ii
Hangzhou DPtech Technologies Co., Ltd. provides full- range technical support.
If you need any help, please contact Hangzhou DPtech Technologies Co., Ltd. and its
sale agent, according to where you purchase their products.
Hangzhou DPtech Technologies Co., Ltd.
Address: 6th floor, zhongcai mansion, 68 tonghelu, Binjiangqu, Hangzhoushi
Address code: 310051

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
iii
Declaration
Copyright 2011
Hangzhou DPtech Technology Co., Ltd.
All rights reserved.
No Part of the manual can be extracted or copied by any company or individuals
without written permission, and can not be transmitted by any means.
Owing to product upgrading or other reasons, information in this manual is subject to
change. Hangzhou DPtech Technology Co., Ltd has the right to modify the content in this
manual, as it is a user guides, Hangzhou DPtech Technology Co., Ltd made every effort in
the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the warranty of any
kind express or implied.

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
i
Table of Contents
CHAPTER 1 PRODUCT INTRODUCTION............................................................................... 1
1.1 PRODUCT OVERVIEW.................................................................................................................1
1.2 INTRODUCTION OF PRODUCT MODEL AND SPECIFICATIONS...................................................1
1.3 THE FRONT VIEW INTRODUCTION............................................................................................. 2
1.3.1 LSW5003-4GP-I-R................................................................................................................... 2
1.4 PORT INTRODUCTION................................................................................................................. 5
1.4.1 CONSOLE PORT ......................................................................................................................... 5
1.4.2 FAST ETHERNET ELECTRICAL INTERFACE................................................................................ 5
1.4.3 SFP ETHERNET OPTICAL INTERFACE........................................................................................ 7
1.5 PRODUCT COMPONENT............................................................................................................10
1.5.1 SERVICE MODULE(LSW-8FET-E).......................................................................................... 10
1.5.2 SERVICE MODULE (LSW-8FEL-E)......................................................................................... 10
1.5.3 SERVICE MODULE(LSW-6FES-E) .......................................................................................... 11
1.5.4 SERVICE MODULE(LSW-8FEP-E) .......................................................................................... 11
1.5.5 SERVICE MODULE(LSW-6FEST-E)....................................................................................... 12
CHAPTER 2 PREPARING FOR INSTALLATION.................................................................14
2.1 GENERAL SAFETY RECOMMENDATIONS................................................................................. 14
2.2 EXAMINING THE INSTALLATION SITE..................................................................................... 14
2.2.1 TEMPERATURE AND HUMIDITY REQUIREMENT ...................................................................... 14
2.2.2 CLEANLINESS.......................................................................................................................... 15
2.2.3 ESD REQUIREMENT ................................................................................................................ 15
2.2.4 ANTI-INTERFERENCE REQUIREMENT...................................................................................... 16
2.2.5 LIGHTNING PROTECTION......................................................................................................... 16
2.2.6 GROUNDING REQUIREMENT.................................................................................................... 16
2.2.7 WIRING CABLE REQUIREMENT................................................................................................ 16
2.3 LASER SAFETY..........................................................................................................................17
2.4 EMC DESCRIPTION ..................................................................................................................17
2.5 PREPARING TOOLS...................................................................................................................17
CHAPTER 3 DEVICE INSTALLATION.................................................................................... 1
3.1 INSTALLATION PREPARATION................................................................................................... 1
3.2 INSTALLATION PROCEDURE ...................................................................................................... 2
3.3 MOUNTING THE SWITCH TO A SPECIFIC SITE...........................................................................3
3.3.1 MOUNTING SWITCH ON WORKBENCH....................................................................................... 3

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
ii
3.3.2 MOUNTING SWITCH IN A 19-INCH RACK................................................................................... 4
3.4 CONNECTING GROUNDING WIRES.............................................................................................5
3.5 CONNECTING INTERFACE CABLE..............................................................................................6
3.5.1 HARDWARE POWER FAILURE ALARM ....................................................................................... 7
3.5.2 CONNECTING AC POWER CABLE .............................................................................................. 7
3.5.3 CONNECTING DC POWER CABLE .............................................................................................. 7
3.6 CONNECTING INTERFACE CABLE..............................................................................................8
3.6.1 CONNECTING ETHERNET MANAGEMENT PORT......................................................................... 8
3.6.2 CONNECTING SERVICE PORT..................................................................................................... 9
3.7 VERIFY THE INSTALLATION ......................................................................................................9
3.8 POWER ON THE SWITCH............................................................................................................. 9
CHAPTER 4 STARTING UP THE SWITCH AND UPGRADING SOFTWARE .................. 1
4.1 STARTING UP THE SWITCH AT THE INITIAL BOOT ..................................................................1
4.1.1 SETTING UP A CONFIGURATION ENVIRONMENT....................................................................... 1
4.1.2 BOOTING THE SWITCH.............................................................................................................. 4
4.1.3 STARTING PROCEDURE ............................................................................................................. 5
4.2 DEFAULT LOGIN METHOD FOR WEB ......................................................................................... 6
CHAPTER 5 MAINTENANCE AND TROUBLESHOOTING.................................................1
5.1 DEALING WITH POWER SYSTEM FAILURES............................................................................... 1
5.2 DEVICE TROUBLESHOOTING .....................................................................................................1
1.NO DISPLAY ON THE TERMINAL...................................................................................................... 1
2.GARBLED CHARACTERS ON THE TERMINAL................................................................................... 2

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
i
List of Figures
Figure1-1 LSW5003-4GP-I-R front view.................................................................................................2
Figure1-2 The front view indicator of LSW5003-4GP-I-R ......................................................................3
Figure1-3 LSW5003-4GP-I-R rear view...................................................................................................4
Figure1-4 RJ45 pinout diagram ................................................................................................................6
Figure1-5 Ethernet cable diagram.............................................................................................................6
Figure1-6 LC type connector appearance .................................................................................................9
Figure1-7 SC connector appearance .........................................................................................................9
Figure1-8 Optical module diagram.........................................................................................................10
Figure1-9 The service module (LSW-8FET-E) appearance ...................................................................10
Figure1-10 The service module (LSW-8FEL-E) appearance .................................................................11
Figure1-11 The service module (LSW-6FES-E) appearance..................................................................11
Figure1-12 The service module (LSW-8FEP-E) appearance..................................................................12
Figure1-13 The service module (LSW-6FEST-E) appearance...............................................................13
Figure3-1 Switch installation procedure...................................................................................................2
Figure3-2 Mounting device on the workbench.........................................................................................4
Figure3-3 Mounting ear............................................................................................................................4
Figure3-4 Mounting the device to a rack (To see the image clearly, we only snapshot the device).........4
Figure3-5 Fasten the switch......................................................................................................................5
Figure3-6 Diagram for connecting grounding wire ..................................................................................5
Figure3-7 Connecting ground cable to the ground row ............................................................................6
Figure4-1 Network diagram for configuring the device initial boot through console port.......................1
Figure4-2 Setting up a new connection.....................................................................................................2
Figure4-3 Setting the connection port.......................................................................................................2
Figure4-4 Setting communications parameters.........................................................................................3
Figure4-5 Hyper Terminal ........................................................................................................................4
Figure4-6 Settings tab...............................................................................................................................4
Figure4-7 Web management interface......................................................................................................7

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
i
List of Tables
Table1-1 LSW5003 series Ethernet switch specification table.................................................................1
Table1-2 Console port attribute table........................................................................................................5
Table1-3 Ethernet electrical interface properties......................................................................................5
Table1-4 SFP Ethernet optical interface attributes ...................................................................................7
Table2-1 Temperature/humidity requirement.........................................................................................15
Table2-2 Dust limit in the equipment room............................................................................................15
Table2-3 Limit of harmful gases in the equipment room........................................................................15
Table4-1 Configure serial port properties.................................................................................................3

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
1
Chapter 1 Product Introduction
1.1 Product Overview
The DPtech LSW5003 series of industrial Ethernet switch is the product researched and developed
by DPtech company, which aims at enterprise network and metropolitan area network and provides
convergence and access layer devices for customers with abundant service features and routing
capacities. Also, this kind of product can be used for data center server farm connection. The line-speed
Ethernet L2 switching capacity and different level access and process capability of 10/100/1000M port
can enlarge the application range of the product. In the meanwhile, this kind of product adopts fan-less
design and uses natural wind to dissipate heat, which can save more energy and achieve environment
protection.
1.2 Introduction of product model and specifications
Table1-1 LSW5003 series Ethernet switch specification table
Item
LSW5003-4GP-I-R
Dimension size (W
×D×H)
440*360*44mm
Weight
5.1Kg
Management port
1 Console port, located on the front panel
Rear panel
connectors
4 1000Base-X optical interfaces
Supported interface
module
3 interface modules can be supported
Input
current
on
AC
Rated voltage range：100V-240V AC，50/60Hz
DC
Rated voltage range：100V-240V DC
Input
current
on
AC
Rated current ：1.0A
DC
Rated current ：1.0A
Power input
interface type and
number
2 AC and DC input interfaces
Maximum power of
power supply
60W

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
2
Item
LSW5003-4GP-I-R
Working
environment
temperature
-40℃～70℃
Working
environment
relative humidity
(non-condensation)
0%～95%
1.3 The front view introduction
1.3.1 LSW5003-4GP-I-R
1. Front view
Figure1-1 LSW5003-4GP-I-R front view
(1) Slot SLOT3 interface indicator light 0
(2) Slot SLOT2 interface indicator light 0
(3) Slot SLOT1 interface indicator light 0
(4) Console configuration port
(5) The power indicator (PWR0)
(6) Power indicator (PWR1)
(7) Warning indicator light (ALM)
(8) Running indicator light (RUN)
(9)4GE indicator 0

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
3
Figure1-2 The front view indicator of LSW5003-4GP-I-R
Indicator
Status
Description
(1) Slot SLOT2 interface
indicator 0 green
On
Indicates that slot SLOT3 interface 0 is in communication state
Blinking
Indicates slot SLOT3 interface 0 is sending and receiving data
Off
Indicates that slot SLOT3 interface 0 is in a non-connected state
(2) Slot SLOT1 interface
indicator light 0 green
On
Indicates that slot SLOT2 interface 0 is in communication state
Blinking
Indicates slot SLOT2 interface 0 is sending and receiving data
Off
Indicates that slot SLOT2 interface 0 is in a-non connected state
(3) Slot SLOT0 interface
indicator light 0 green
On
Indicates that slot SLOT1 interface 0 is in communication state
Blinking
Indicates slot SLOT1 interface 0 is sending and receiving data
Off
Indicates slot SLOT1 interface 0 is in non-connected state

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
4
Indicator
Status
Description
(5) The power indicator
(PWR0) green
Off
Indicates that the power 0 is not powered or that the power
module is faulty
On
Indicates that the power 0 is work properly
(6) Power indicator light
(PWR1) green;
Off
Indicates that the power 1 is not powered or that the power
module is faulty
On
Indicates that the power 1 is work properly
(7) Warning indicator light
(ALM) red;
Blinking(8
Hz)
Indicates that the system is abnormal
Off
Indicates that the system does not have any alarm
(8) Running indicator light
(RUN) green;
Off
Indicates that the system is not started
On
Indicates that the system is normal and is in the master state
Blinking(1
Hz)
Indicates that the system is normal and is in the standby state
Blinking(8
Hz)
Indicates that the system is starting
(9) 4GE indicator 0 green
On
Indicates that the GE interface 0 is in a connected state
Off
Indicates that the GE interface 0 is in a non-connected state
Fast
Blinking(8
Hz)
Indicates that the GE interface 0 is sending and receiving data
2. Rear view
Figure1-3 LSW5003-4GP-I-R rear view
(1) Slot(SLOT 1)
(2) Slot (SLOT2)

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
5
(3) Slot (SLOT 3)
(4) 1000M optical interface (1)
(5) Terminals for power supplies
1.4 Port introduction
1.4.1 Console port
The front panel of LSW5003 series of industrial Ethernet switch has a RS232 asynchronous serial port
configuration (CON), which can be used to connect to the computer terminal and can be used to debug,
configure, maintain and manage and load software for the system.
The Console port attribute table is shown in Table 1-2.
Table1-2 Console port attribute table
Attribute
Description
Connector Type
RJ45
Interface standard
RS232
Baud rate
9600bps～115200bps, default is 9600bps
Transmission distance
≤15m
Support services
Connected to a character terminal
Connect to the local PC serial port and run the terminal
emulator on the PC
Command line interface
1.4.2 Fast Ethernet electrical interface
1. Ethernet electrical interface properties
Table1-3 Ethernet electrical interface properties
Attribute
Description
Connector Type
RJ45
Interface standard
MDI/MDIX auto-negotiation [adaptation]
Supported frame format
Ethernet_II
Ethernet_SNAP
Interface speed and
negotiation mode
10Mbps, half / full duplex
100Mbps, half / full duplex

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
6
Attribute
Description
Medium and maximum
transmission distance
Support 100m transmission distance
Interface standard
IEEE 802.3i、802.3u、802.3ab
2.Ethernet interface (RJ45 connector)
By using of the 5 categories or above 5 categories twisted pair cable to connect Ethernet, LSW5003
series Ethernet switch interfaces (10/100/1000M) adopt RJ45 connector and support MDI/MDIX
auto-negotiation. When you use the interfaces, please adopt 5 categories twisted pair cable and RJ45
connector to make network cable.
Figure1-4 RJ45 pinout diagram
3.Ethernet cable
Ethernet electric interface adopt 5 categories twisted pair cable to connect Ethernet, as shown in
Figure1-5.
Figure1-5 Ethernet cable diagram
For different usage, Ethernet twisted pair cables can be divided into straight-through and crossover
cables:
Standard cable: is also called straight-through cable. The sequences of the twisted pairs crimped in the
RJ-45 connectors at both ends are the same. It connects a terminal device (PC or router) to a HUB or
LAN Switch. A standard cable is provided for you along with the device.
Crossover cable: The sequences of the twisted pairs crimped in the RJ-45 connectors at both ends are
different. It connects a terminal device (PC or router) to another terminal device. You make crossover
cables by yourself.

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
7
1.4.3 SFP Ethernet optical interface
1.SFP Ethernet optical interface attributes
Table1-4 SFP Ethernet optical interface attributes
Attribute
Description
Connector type
SFP/LC
Interface standard
802.3 802.3u and 802.3ab
Transmitt
ing
optical
power
type
Short
haul(850nm
)light
interface
module
Medium haul
(1310nm)
light
interface
module
Medium haul
(1310nm)
light
interface
module
Long haul
(1310nm)
light
interface
module
Long haul
(1310nm)
light interface
module
Min
-9dBm
-9dBm
-9.5dBm
-15dBm
-5dBm
Max
-2.5dBm
-3dBm
-3dBm
-8dBm
0dBm
RX Sensitivity
-18dBm
-20dBm
-19dBm
-28dBm
-34dBm
Central
wavelength
850nm
1310nm
1310nm
1310nm
1310nm
fiber type
62.5/125 μ
m
multi-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
optical fiber
9/125 μm
single-mode
optical fiber
9/125 μm
single-mode
optical fiber
Maximum
transmission
distance
0.55km
2km
10km
15km
40km
Operating mode
1000Mbps full duplex
Attribute
Description
Connector Type
SFP/LC
Supported physical
layer type
10GBASE-R
Interface rate
LAN PHY mode：9.95Gbps-10.5 Gbps
Transmitt
type
Long distance multimode
Ultra long distance
Ultra long distance single

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
8
Attribute
Description
ing
optical
power
single mode
mode
Min
-5dBm
0dBm
-5dBm
Max
0dBm
5dBm
0dBm
RX Sensitivity
-34dBm
-22dBm
-34dBm
Central wavelength
1310nm
1550nm
1550nm
fiber type
62.5/125μm multi-mode
fibre
9/125 μm single-
mode fiber
9/125 μm single-mode
fiber
Maximum
transmission
distance
60km
90km
100km
Operating mode
1000Mbps full duplex
2.Fiber connector
A fiber connector is a passive component that connects two or more fiber cable segments stably but not
permanently. Fiber connectors are indispensable to an optical communication system, making it
possible to connect and disconnect optical channels. Either convenient for user to debug and maintain
optical system, or allow user to adjust optical system more flexible.
Following are several fiber connector types:
LC: A compact optical connector developed by Lucent
SC: A square optical connector
FC: A round optical connector with screw threads
ST: A round plug-in optical connector
MT-RJ: A square optical transceiver
At present, Ethernet optical port on service board only support LC connector

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
9
Figure1-6 LC type connector appearance
Figure1-7 SC connector appearance
Note:
Using optical fiber to connect network device, make sure that the type of the optical fibre
connector should correspond to the optical module.
Before connecting optical fiber, make sure that local transmitter optical power isn’t beyond the
upper limit of the optical module. Otherwise it may damage optical module.
3.Ethernet optical interface fiber
For 1000M Ethernet optical interface, you can select single-mode or multi-mode optical fiber to
connect Ethernet and according to 1000M Small Form-factor Pluggable (1G SFP) to select optical fiber.
These kinds of SPF interfaces are LC fiber connector, requiring the optical fiber with LC optical fiber
connector. All optical modules support hot swapping. XFP optical module and LC optical fiber
connector are as shown in following figure.

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
10
Figure1-8 Optical module diagram
1.5 Product component
1.5.1 Service module(LSW-8FET-E)
The service module (LSW-8FET-E) provides 8*Fast Ethernet interfaces (RJ45).
Figure1-9 The service module (LSW-8FET-E) appearance
1.5.2 Service module (LSW-8FEL-E)
The service module (LSW-8FEL-E) provides 8*Fast Ethernet optical interfaces (LC).

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
11
Figure1-10 The service module (LSW-8FEL-E) appearance
1.5.3 Service module(LSW-6FES-E)
The service module (LSW-6FES-E) provides 6*Fast Ethernet optical interfaces (SC).
Figure1-11 The service module (LSW-6FES-E) appearance
1.5.4 Service module(LSW-8FEP-E)
The service module (LSW-8FEP-E) provides 8*Fast Ethernet optical interfaces (SFP).

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
12
Figure1-12 The service module (LSW-8FEP-E) appearance
1.5.5 Service Module(LSW-6FEST-E)
The service module (LSW-6FEST-E) provides 6*Fast Ethernet optical interfaces (ST).

DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 2Installation
13
Figure1-13 The service module (LSW-6FEST-E) appearance