
Do NOT immerse the appliance in water or any liquid.2.
Do NOT use abrasive, corrosive, or flammable cleansers (such as
bleach or alcohol) to clean any part of the appliance.
3.
Remove the water tank, open the cover, then wash the tank and its
cover with clean water.
3.
Take out the filter, clean it with a vacuum cleaner or water, and then dry
it in a ventilated place.
4.
Recommended cleaning frequency of the filter: Once a month.5.
Turn off and unplug the appliance.1.
Wipe the outer enclosure with neutral detergent and a soft cotton cloth.
Note: When wiping the air outlet, please ensure that no water drops into
the appliance.
Note: Do not expose the filter at a high-temperature location or under
direct sunlight.
2.
How to Clean
If the appliance is to be stored for an extended period of time, take the
following actions before putting it away:
Turn off and unplug the appliance. Arrange the power cord after the
fan cools down.
1.
Remove the drain hose, and put the nozzle back into its original
location.
3.
Clean the air inlet/outlet, and wipe the appliance with a neutral
detergent and a soft cloth.
4.
Once the appliance is completely dried, put it in a dust cover/bag and
place it in a well-ventilated place out of direct sunlight.
5.
Empty the water tank and clean it.2.
Storage and Maintenance
- 07 - - 08 -
SPECIFICATIONS
TROUBLESHOOTING TIPS
Model
Power
Rated Voltage
Moisture Removal/Day
Water Tank Capacity
Timer Settings
Operation Sound Level
Drain Hose
Product Dimensions
Product Weight
X2
180W (Sleep Mode), 340W (High Speed)
120V~60Hz
Up to 0.8 Gal/3 L (80% Relative Humidity)
0.66 Gal/2.5 L
2 / 4 / 8 Hours
30 dB (Sleep Mode), 42 dB (High Speed)
Yes
260 x 160 x 390 mm/10 x 6.2 x 15.6 in (L x W x H)
3.7 kg/8.2 pounds
Problems What to Do
Fail to work 1. Confirm the power cord is plugged firmly into the socket.
Stop working
unexpectedly
Power indicator
flashes in White
1. This dehumidifier will shut off automatically after working
continuously for 24 hours.
2. Confirm the power cord is plugged firmly into the socket.
1. NTC abnormal protection,Please unplug and leave it for
20 minutes before turning it on
2. Contact our customer service team.
3. Check whether the power supply at home is normal.
4. Check whether there are objects in the air outlet or inlet.
If the air outlet/inlet is blocked by objects, the internal
operating temperature will increase to trigger high-tempera-
ture protection, and then the appliance will stop working.
2. Check whether the power supply at home is normal.