Dr.Prepare DDF-1BKDF5 User manual

Model: DDF-1BKDF5
30″ OSCILLATING
TOWER FAN WITH
REMOTE
User Guide
This symbol show: the appliance is class II equipment, for which the power cord plug is
without of the pole to the ground.
ASSEMBLY
Attention: Do not plug in the fan before the base is correctly assembled with screws.
IMPORTANT SAFETY INSTRUCTIONS
This device is intended for household use ONLY and not for commercial, industrial or
outdoor use. Any other use is considered inappropriate and therefore dangerous. The
manufacturer cannot be held responsible for eventual damage caused by inappropriate,
improper or irresponsible use and/or for repairs made to the product by unauthorised
personnel.
This appliance is intended to be used in household and similar applications such as:
staff kitchen in shops, offices and other working environments;
Do not touch the appliance with wet hands or feet.
Do not insert or allow any foreign objects or your fingers to enter grille openings.
The appliance must be kept out of children’s reach.
Basic safety tips must always be observed when using electric appliances to avoid risks of
fire, electric shocks and physical injuries.
Do not use the appliance if it is not operating correctly or seems damaged; if in doubt, please
contact professionally qualified personnel.
Make sure that the appliance is working correctly: if not, turn the appliance off and have it
checked by professionally qualified personnel.
Always unplug the appliance before you assemble, disassemble or make adjustments to the
appliance.
Do not move the appliance when it is operating.
Unplug the appliance when not in use.
Do not use the device at room temperatures above 104°F/40 °C.
Do not move the appliance when it is operating.
Do not leave the device exposed to the weather (sun, rain, etc.).
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way
and if they understand the hazards involved.
farm houses
by clients in hotels, motels and other residential type environments
bed and breakfast type environments
INSTALLATION
Before connecting the appliance, please make sure the voltage of the fan is compatible with
the power supply in your house.
The power socket must be easy to reach so the plug can be removed quickly in case of
emergency.
Do not place the appliance near sinks or other container of liquids (minimum distance of 6.56
feet/2 meters) to prevent the unit from liquids.
Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct
the air intake grille.
Make sure that the electric cord is not touching rough, hot or moving surfaces.
Place the appliance on a horizontal, flat surface or table.
In the event of a breakdown or poor operation, turn the fan off and contact Dr. Prepare
Support Team for help.
After removing the packing materials, check the integrity of the fan; if you are unsure, do not
use it and ask for qualified professional help. The packing materials (plastic bags, polysty-
rene foam, nails, etc.) must be kept out the reach of children because they are potential
sources of danger.
Do not pull the cord to disconnect the plug from the socket.
If the power cord is damaged, it must be replaced by the manufacturer, its authorized service
agent or professionally qualified personnel to avoid a hazard.

OPERATION
WARRANTY
CUSTOMER SUPPORT
Dr.Prepare products are covered by a 12-month limited warranty from the original purchase
date. If any problems occur, please contact our support team.
We only provide after-sales services for products that are sold by Dr.Prepare or retailers and
distributors authorized by Dr.Prepare. If you have purchased your unit from other channels,
please contact your seller for more information about return and warranty.
If you have any questions or concerns, please send us an email at [email protected]
Step 2:
Take out the fan and spare parts from the packaging. Loosen 4 screws from the
bottom of your fan.
Connect one base part to the other by the slots. Align the base with the fan via screw
holes (or via the 2 holes for the pillars) and tighten the screws.
You can use the control panel (B) or the remote control (A) to set the fan.
Turn off the fan and unplug the adapter from the wall outlet when the fan is not in use
for long periods.
Plug the fan into a wall outlet,
A. Remote control
B. Control panel
C. Indicator
D. Base 1
E. Base 2
F. Screws (4 pcs)
1.
Press the ON/OFF button , the fan will start at Low speed. When the fan is running, press
the ON/OFF button once to turn off the fan.
2.
Press the SPEED button choose the Fan Speed, including Low, Medium, and High. The
indicator (C) of corresponding fan speed will light up.
3.
Press the MODE button to select the Wind Mode among Natural Mode (NAT) and Sleep
Mode (SLE).
4.
Press the OSC button and the fan starts oscillating. Press this button again to stop oscilla-
tion. The maximum oscillation angle is 70°.
5.
Press the TIMER button to set the set the timer with 0.5-hour increment (1-7.5 Hours).
6.
Step 1:
CLEANING AND MAINTENANCE
Attention: Ensure the fan is turned off and unplugged before cleaning.
Use a soft cloth to gently wipe the outer surfaces of the fan clean.
Clean the motor's air inlet to keep it from dust and lint.
Do not immerse any part of the fan in water or other liquids.
CORD STORAGE
If the fan will not be used for long periods, we advise you to store the fan with this manual in
its original packaging in a cool, dry place.
You can coil the power cord around the base and push the plug into the slot at the back of your
fan. Please refer to the picture.