Dragon Touch BabyCare User manual

USER
MANUAL
BabyCare Baby Monitor
Please read this manual before operating your baby monitor,
and keep it for further reference.

Warning
Packing List
Camera Unit
Charging
Camera Setting
1. Add Cameras
2. Delete Cameras
3. Cycle Cameras
4. Sound Detection
5. Temperature Alarm
6. Lullaby
7. Sleep Mode
8. Setting
Monitor Screen Icon
FQA
Contact Service
1
2
2
5
6
6
8
8
9
10
11
12
13
14
15
16
CONTENTS

WARNING
1. Strangulation Hazard - Children have strangled in cords.
Keep this cord out of the reach of children (more than 3 feet (1m) away).
2. Never Place the Camera of Cord in or Near Crib or Playpen.
Secure the cord at least three feet away from crib or playpen.
3. Caution - Only insert a battery pack, Never use the transmitter or receiver near water,
including near a bathtub, sink, laundry tub, wet basement, etc.
4. Use only the AC adapters provided.
5. Adult assembly is required. Keep small parts away from children when assembling.
6. This product is not a toy. Do not allow children to play with it.
7. This product is not intended to replace proper adult supervision of children.
8. You must check your child’s activity regularly, as this product will not alert parents to
silent activities of a child.
9. Before using this product, read and follow all instructions and warnings contained in this
booklet.
10. This product is intended for indoor use only.
11. This product is not intended for use as a medical monitor and its use should not
replace adult supervision.
12. Test monitor before use and after changing camera location. Check reception regularly.
Obstacles, such as concrete walls, may shorten the wireless signal transfer range.
13. Always unplug AC adapters from wall outlets and power sources during periods of
non-use.
14. Do not touch the plug contacts with sharp or metal objects.
15. Do not allow water damage to the monitor unit, charging port, or charging cable
which cause overheat of the charging components.
16. Do not use unofficial third party charging cables and adapters to charge the device.
This may result in overheat of the charging port. Only use the charging cables and
adapters provided in the box.
PACKING LIST
2 x Micro-USB Power Cable
2 x Power Adapter
1 x Monitor1 x Camera
MENU CAM
SHORT
-CUT
MIC
SOUNDLEVEL
TALK
OK
1 x Green Antlers Hat 1 x Pink Antlers Hat
4 x Mount Screws 1 x Camera Bracket 1 x User Manual
USER
MANUAL
BabyCare Baby Monitor
PAIR
IN-5V
CAMERA UNIT
4
1
2
3
5
7
6
9
8
10
01 02

1. Night Vision Sensor
2. Main Camera Lenses
3. Power Indicator Light
4. MIC
5. Camera mounting bracket
6. Speaker
7. Camera Antenna
8. Pair Button
9. Micro USB Port
10. Temperature Sensor
PARENT UNIT
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
1 2
3
4
5
9
7
6
10
11
12 13
8
14
15
RESET
16
17
18
20
19
1. MENU: Press to access different menu options or exit the menu.
2. CAM: Switch between cameras when you add more than one. Cycle display cameras.
3. Press to pan the camera left.
4. Press to tilt the camera upward.
5. Charging LED Indicator.
6. Press to pan the camera right.
7. Power LED Indicator.
8. Press to tilt the camera downward.
9. OK / : Short press to confirm your selection. Long press to digital zoom.
10. TALK: In monitor interface, long press to talk to your baby.
11. SHORTCUT: Press to adjust monitor`s volume and brightness.
12. MIC
13. Sound Level LED.
14. POWER/SLEEP: Long press to turn on/off the monitor, short press to turn on/off the
screen.
15. Monitor Antenna.
16. Battery Compartment.
17. Support Stand
18. Speaker
19. Micro USB Charging Port.
20. Reset Hole: The monitor will force a shutdown when you take this operation. Please
note that when you turn on the monitor, it does not restore factory settings.
03 04

CHARGING CAMERA SETTING
1. Charging the Monitor.
2. Charging the Camera.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
① Connect the monitor power adapter to the monitor unit.
② Press and hold for 2 second to turn the baby monitor on.
① Connect the camera power adapter to the camera unit.
② Position your camera unit no less than 3 feet away from your baby’s crib. Ensure the
power cord is not within reach of your baby.
Note: The baby monitor and baby camera are paired before leaving factory. Refer to the
following steps when adding extra camera or after resetting a baby camera.
1. Add Cameras
①Press Menu button to enter to the interface like picture 1, choose “Camera”.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
CAMERAS SOUND
DETECTION
TEMPERATURE
ALARM
LULLABIES SETTINGSLEEP MODE
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
1 2 3 4
②Press “OK” button to enter to the interface like picture 2. Select the icon, then press
“OK” button.
Picture 2
Picture 1
1
05 06

2. Delete Cameras
①Enter menu setting, go to Cameras. Select the number of camera that you want to
delete. Select icon, press “OK” button.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
+
-
Picture 3
③Select the icon, then press “OK” button. It will prompt “Camera is NO pair”. Then
press “OK” button to start the pairing.
+
PAIR
IN-5V
⑤Press camera’s PAIR key for 1s, the monitor will prompt “Pairing is OK”.
Note: You can add up to 4 cameras per baby monitor.
-
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
+
-
②The screen will prompt “Camera is paired. Can be deleted.”, then press “OK” button, the
camera deleted successfully.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
Start pairing......
3. Cycle Cameras
Cycle through the list of connected baby cameras. And you also can use change the
cameras one by one.
Note: When volume is set to high, monitor will emit a loud noise if placed close to the
camera. This is normal phenomenon and can be resolved when camera is moved away
from the monitor.
CAM
07 08

4. Sound Detection
①Enter Menu settings, go to "SOUND DETECTION”. Press “OK” button.
5. Temperature Alarm
①Enter Menu setting, go to “TEMPERATURE ALARM”. Press “OK” button.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
CAMERAS SOUND
DETECTION
TEMPERATURE
ALARM
LULLABIES SETTINGSLEEP MODE
②There are 3 levels for this function. Press navigation buttons to chose the level. You can
set the baby monitor to alert you when a specific noise level is detected.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
Low Default High OFF
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
CAMERAS SOUND
DETECTION
TEMPERATURE
ALARM
LULLABIES SETTINGSLEEP MODE
②You can use navigation buttons to switch °C & °F . And chose turn on or turn off
temperature alarm function.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
°C
°F
ON
OFF
09 10

6. Lullaby
①Enter Menu setting, go to “LULLABIES”. Press “OK” button.
7. Sleep Mode
①Enter Menu setting, go to “SLEEP MODE”. Press “OK” button.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
CAMERAS SOUND
DETECTION
TEMPERATURE
ALARM
LULLABIES SETTINGSLEEP MODE
②There are 5 internal lullabies. Press navigation buttons to make your choice. ②Select to turn off the screen 5mins, 30mins, 60mins.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
123
45OFF
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
CAMERAS SOUND
DETECTION
TEMPERATURE
ALARM
LULLABIES SETTINGSLEEP MODE
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
５
ｍｉｎｓ ＯＦＦ
３０
ｍｉｎｓ ６０ ｍｉｎｓ
Note: When the sound detection function is turn on, the camera detects voice, the screen
will automatic turn the display mode, if the monitor in the sleep mode.
11 12

8. Setting
①Enter Menu setting, go to “SETTING”. Press “OK” button.
② There are three selections. Select “Date / Time” to set the monitor display date and
time. “System Version” show you the baby monitor version.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
CAMERAS SOUND
DETECTION
TEMPERATURE
ALARM
LULLABIES SETTINGSLEEP MODE
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
③Select “Factory Settings”, When you reset the monitor, it will restore factory setting.
MENU CAM
SHORT
-CUT
MIC
SOUND LEVEL
TALK
OK
Restore to default settings?
YES NO
MONITOR SCREEN ICON
1. Stander Screen Menu Icon
Wireless signal strength
Show you which camera on display
Cycle camera enable
Current time
Sound detection enable
Temperature alarm enable
Sleep mode enable
Lullaby enable
Current nursery room temperature
Current battery level of the monitor unite
1
27°C
15:01
13 14

2. Alarm Icon
Camera is not added or camera and monitor are disconnected
Sound Alarm
Temperature Alarm
FQA
Q: Cannot to connect to camera.
A: 1. Please ensure the camera keep charging.
2. Please ensure the camera and monitor within 900 feet (at open area).
Q: The video changed to unclear.
A: 1. Please try to remove the camera near to monitor.
2. Please clear the obstacle between camera and monitor.
Q: The baby monitor has some noise.
A: The camera and tablet may be too close. Move them further apart.
Q: Can I use the 220V?
A: The working voltage of this baby monitor is 110-240V
Q: How long this monitor can standby?
A: After charged full, the monitor can standby about 4 hours.
Q: Can I hear my baby’s voice when turn off the screen?
A: Yes, please turn on the “Sound Detection” function and press to turn off the screen,
then you will hear your baby’s voice and alarm once any abnormal sound or noise
happened.
Q: The rechargeable battery will not charge or no charge light?
A: 1. The USB Output Adapter may not be properly connected.
2. Battery pack may not be properly connected inside the battery compartment.
Reconnect the wire tab of battery.
3. Try using the other USB Power Cable included.
Q: Picture is black and white?
A: Night vision LED may be on. Night vision mode operates in black and white. Turn on
room lights to force monitor out of night vision mode.
For any inquires, issue or comments concerning our products, please send E-mail to the
address below, and we will respond as soon as possible.
• Warranty
12-month limited warranty.
• Call us
[phone] 9am-5pm EST, Monday-Friday (except holidays).
• Email us
[email protected]
CUSTOMER SERVICE
15 16