Draper 10582 User manual

INSTRUCTIONS FOR
10 tonne Hydraulic
Bench Press
10, 20 & 30 tonne Hydraulic Floor Presses
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy
of continuous improvement determines the right to make modifications without prior warning.
10599
30 tonne hydraulic
floor press
10582
10 tonne hydraulic
bench press
10583
10 tonne hydraulic
floor press
10598
20 tonne hydraulic
floor press
Stock Nos. 10582 10583
10598 10599
Part Nos.
HBP/10B HFP/10B
HFP/20B HFP/30B

1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR:
10 tonne HYDRAULIC BENCH PRESS
Stock no. 10582
Part no. HBP/10B
10, 20 & 30 tonne HYDRAULIC FLOOR PRESS
Stock nos. 10583, 10598, 10599
Part nos. HFP/10B, HFP/20B, HFP/30B
1.2 REVISIONS:
As our user manuals are continually updated, users should make sure that they use the very
latest version.
Downloads are available from: http://www.drapertools.com/b2c/b2cmanuals.pgm
DRAPER TOOLS LIMITED WEBSITE: www.draper.co.uk
HURSLEY ROAD PRODUCT HELPLINE: [phone]
CHANDLER’S FORD GENERAL FAX: [phone]
EASTLEIGH
HAMPSHIRE
SO53 1YF
UK
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! Information that draws attention to the risk of injury or death.
CAUTION! Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal & educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other
form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
Date first published November 2011

2. CONTENTS
3
2.1 CONTENTS
Page content Page
1 TITLE PAGE
1.1 INTRODUCTION ............................................................................................... 2
1.2 REVISION HISTORY........................................................................................... 2
1.3 UNDERSTANDING THIS MANUAL ................................................................... 2
1.4 COPYRIGHT NOTICE......................................................................................... 2
2 CONTENTS
2.1 CONTENTS ........................................................................................................ 3
3 GUARANTEE
3.1 GUARANTEE ..................................................................................................... 4
4 INTRODUCTION
4.1 SPECIFICATION ................................................................................................. 5
4.2 HANDLING & STORAGE ................................................................................... 6
5 HEALTH & SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR HYDRAULIC PRESS USE .................... 7
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR HYDRAULIC PRESS USE............... 9A
6 TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ............................................................................................... 10B
6.2 MAIN COMPONENT DESCRIPTIONS ................................................................ 10A
7 UNPACKING & CHECKING
7.1 PACKAGING...................................................................................................... 11
7.2 WHAT’S IN THE BOX? ...................................................................................... 11
8 ASSEMBLY
8.1 SUPPORT FEET AND UPRIGHT SUPPORT ASSEMBLY ...................................... 14
8.2 FITTING THE RAM SLIDE .................................................................................. 15
8.3 FITTING THE HYDRAULIC PUMP UNIT............................................................. 15
8.4 FITTING THE RAM UNIT ................................................................................... 16
8.5 PRESSURE GAUGE AND HOSE ASSEMBLY ...................................................... 17
8.6 TIGHTEN ALL FIXINGS ...................................................................................... 17
8.7 SETTING THE TABLE ......................................................................................... 17
9 OPERATING INSTRUCTIONS
9.1 PUMP UNIT ....................................................................................................... 18
9.2 POSITIONING .................................................................................................... 18
10 MAINTENANCE AND TROUBLESHOOTING
10.1 CARE AND MAINTENANCE .............................................................................. 19
10.2 TROUBLESHOOTING......................................................................................... 19
11 EXPLANATION OF SYMBOLS
11.1 EXPLANATION OF SYMBOLS ........................................................................... 20
12 DISPOSAL
12.1 DISPOSAL ......................................................................................................... 21
DECLARATION OF CONFORMITY .....................................................................................ENCLOSED

4
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to
be free from defective materials and workmanship.
Should the press develop a fault, please return the complete press to your nearest distributor or
contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: [phone] or Product Helpline [phone].
A proof of purchase must be provided with the press.
If upon inspection it is found that the fault occurring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee period covering
parts/labour is 12 months from the date of purchase except where tools are hired out when the
guarantee period is ninety days from the date of purchase. This guarantee does not apply to
normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe
handling, alterations, accidents, or repairs attempted or made by any personnel other than the
authorised Draper warranty repair agent.
Note: If the press is found not to be within the terms of warranty, repairs and carriage charges
will be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.