Draytek Vigor2930 Series User manual

Vigor2930 Series
Dual-WAN Security Firewall
User’s Guide
Version: 1.2
Date: 2008/03/10
Copyright 2008 All rights reserved.
This publication contains information that is protected by copyright. No part may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright
holders. The scope of delivery and other details are subject to change without prior notice.
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Inc.
Other products may be trademarks or registered trademarks of their respective manufacturers.

Vigor2930 Series User’s Guide
ii
Copyright Information
Copyright
Declarations
Copyright 2008 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language without written
permission from the copyright holders.
Trademarks
The following trademarks are used in this document:
zMicrosoft is a registered trademark of Microsoft Corp.
zWindows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are
trademarks of Microsoft Corp.
zApple and Mac OS are registered trademarks of Apple Inc.
zOther products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
zRead the installation guide thoroughly before you set up the router.
zThe router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the router
yourself.
zDo not place the router in a damp or humid place, e.g. a bathroom.
zThe router should be used in a sheltered area, within a temperature range
of +5 to +40 Celsius.
zDo not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight or
heat sources.
zDo not deploy the cable for LAN connection outdoor to prevent electronic
shock hazards.
zKeep the package out of reach of children.
zWhen you want to dispose of the router, please follow local regulations on
conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the router will be free from
any defects in workmanship or materials for a period of two (2) years from the
date of purchase from the dealer. Please keep your purchase receipt in a safe
place as it serves as proof of date of purchase. During the warranty period, and
upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, we will, at our discretion, repair or replace
the defective products or components, without charge for either parts or labor, to
whatever extent we deem necessary tore-store the product to proper operating
condition. Any replacement will consist of a new or re-manufactured
functionally equivalent product of equal value, and will be offered solely at our
discretion. This warranty will not apply if the product is modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working
conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the
product will not be covered by the warranty. We reserve the right to revise the
manual and online documentation and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or
changes.
Be a Registered
Owner Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates Due to the continuous evolution of DrayTek technology, all routers will be
regularly upgraded. Please consult the DrayTek web site for more information on
newest firmware, tools and documents.
http://www.draytek.com

Vigor2930 Series User’s Guide iii
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: Vigor2930 Series Router
DrayTek Corp. declares that Vigor2930 Series of routers are in compliance with the following essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by
complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the
requirements set forth in EN60950.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the use is encouraged to try to correct the interference by one of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different form that to which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired operation.
.
Please visit http://www.draytek.com/about_us/R_TTE_Certification.php.
This product is designed for the ISDN and 2.4GHz WLAN network throughout the EC region and Switzerland
with restrictions in France. Please see the user manual for the applicable networks on your product.

Vigor2930 Series User’s Guide
iv
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1
Preface ...............................................................................................................1
1.1 Web Configuration Buttons Explanation................................................................................. 1
1.2 LED Indicators and Connectors.............................................................................................. 2
1.2.1 For Vigor2930................................................................................................................... 3
1.2.2 For Vigor2930n................................................................................................................. 4
1.2.3 For Vigor2930Vn............................................................................................................... 6
1.2.4 For Vigor2930VS.............................................................................................................. 8
1.2.5 For Vigor2930VSn..........................................................................................................10
1.3 Hardware Installation ............................................................................................................ 12
1.4 ISDN Phone Adapter Installation .......................................................................................... 13
2
Configuring Basic Settings ............................................................................15
2.1 Changing Password.............................................................................................................. 15
2.2 Quick Start Wizard ................................................................................................................ 17
2.2.1 PPPoE ............................................................................................................................ 18
2.2.2 PPTP............................................................................................................................... 20
2.2.3 Static IP........................................................................................................................... 21
2.2.4 DHCP.............................................................................................................................. 22
2.3 Online Status......................................................................................................................... 23
2.4 Saving Configuration............................................................................................................. 25
3
AdvancedWebConfiguration..................................................................................27
3.1 WAN...................................................................................................................................... 27
3.1.1 Basics of Internet Protocol (IP) Network......................................................................... 27
3.1.2 General Setup................................................................................................................. 28
3.1.3 Internet Access............................................................................................................... 30
3.1.4 Load-Balance Policy.......................................................................................................36
3.2 LAN ....................................................................................................................................... 39
3.2.1 Basics of LAN................................................................................................................. 39
3.2.2 General Setup................................................................................................................. 41
3.2.3 Static Route.................................................................................................................... 43
3.2.4 VLAN............................................................................................................................... 46
3.2.5 Bind IP to MAC............................................................................................................... 47
3.3 NAT ....................................................................................................................................... 48
3.3.1 Port Redirection.............................................................................................................. 49
3.3.2 DMZ Host........................................................................................................................ 51
3.3.3 Open Ports...................................................................................................................... 54
3.4 Objects Settings.................................................................................................................... 56

Vigor2930 Series User’s Guide v
3.4.1 IP Object......................................................................................................................... 56
3.4.2 IP Group ......................................................................................................................... 58
3.4.3 Service Type Object .......................................................................................................59
3.4.4 Service Type Group........................................................................................................60
3.4.5 CSM-IM Object............................................................................................................... 61
3.4.6 CSM-P2P Object ............................................................................................................62
3.4.7 CSM-Misc Object............................................................................................................ 64
3.5 CSM ...................................................................................................................................... 65
3.5.1 IM/P2P Profile................................................................................................................. 65
3.5.2 URL Content Filter Profile............................................................................................... 66
3.5.3 Web Content Filter Profile............................................................................................... 68
3.6 Firewall.................................................................................................................................. 70
3.6.1 Basics for Firewall........................................................................................................... 70
3.6.2 General Setup................................................................................................................. 72
3.6.3 Filter Setup ..................................................................................................................... 73
3.6.4 DoS Defense .................................................................................................................. 79
3.7 Bandwidth Management ....................................................................................................... 82
3.7.1 Sessions Limit................................................................................................................. 82
3.7.2 Bandwidth Limit .............................................................................................................. 84
3.7.3 Quality of Service............................................................................................................ 85
3.8 Applications........................................................................................................................... 92
3.8.1 Dynamic DNS................................................................................................................. 92
3.8.2 Schedule......................................................................................................................... 94
3.8.3 RADIUS .......................................................................................................................... 95
3.8.4 UPnP............................................................................................................................... 97
3.8.5 Wake on LAN.................................................................................................................. 98
3.9 VPN and Remote Access.................................................................................................... 100
3.9.1 Remote Access Control................................................................................................ 100
3.9.2 PPP General Setup ...................................................................................................... 100
3.9.3 IPSec General Setup.................................................................................................... 102
3.9.4 IPSec Peer Identity....................................................................................................... 103
3.9.5 Remote Dial-in User ..................................................................................................... 105
3.9.6 LAN to LAN................................................................................................................... 108
3.9.7 Connection Management.............................................................................................. 116
3.10 Certificate Management.....................................................................................................117
3.10.1 Local Certificate.......................................................................................................... 117
3.10.2 Trusted CA Certificate ................................................................................................ 119
3.10.3 Certificate Backup....................................................................................................... 120
3.11 VoIP................................................................................................................................... 120
3.11.1 DialPlan ...................................................................................................................... 121
3.11.2 SIP Accounts.............................................................................................................. 129
3.11.3 Phone Settings ........................................................................................................... 133
3.11.4 Status.......................................................................................................................... 149
3.12 ISDN.................................................................................................................................. 150
3.12.1 Basic Concept............................................................................................................. 150
3.12.2 General Settings......................................................................................................... 151
3.12.3 Dial to Single/Dual ISPs.............................................................................................. 154
3.12.4 Call Control................................................................................................................. 157
3.13 Wireless LAN .................................................................................................................... 159
3.13.1 Basic Concepts........................................................................................................... 159
3.13.2 General Setup............................................................................................................. 161

Vigor2930 Series User’s Guide
vi
3.13.3 Security....................................................................................................................... 163
3.13.4 Access Control............................................................................................................ 164
3.13.5 WPS............................................................................................................................ 166
3.13.6 WDS............................................................................................................................ 168
3.13.7 AP Discovery.............................................................................................................. 172
3.13.8 Station List.................................................................................................................. 172
3.13.9 Rate Control................................................................................................................ 174
3.14 System Maintenance......................................................................................................... 174
3.14.1 System Status............................................................................................................. 175
3.14.2 TR-069 Setting............................................................................................................ 176
3.14.3 Administrator Password.............................................................................................. 177
3.14.4 Configuration Backup ................................................................................................. 177
3.14.5 Syslog/Mail Alert......................................................................................................... 180
3.14.6 Time and Date............................................................................................................ 181
3.14.7 Management............................................................................................................... 182
3.14.8 Reboot System........................................................................................................... 183
3.14.9 Firmware Upgrade...................................................................................................... 184
3.15 Diagnostics........................................................................................................................ 185
3.15.1 Dial-out Trigger........................................................................................................... 185
3.15.2 Routing Table ............................................................................................................. 186
3.15.3 ARP Cache Table....................................................................................................... 186
3.15.4 DHCP Table................................................................................................................ 187
3.15.5 NAT Sessions Table................................................................................................... 187
3.15.6 Data Flow Monitor....................................................................................................... 188
3.15.7 Traffic Graph............................................................................................................... 190
3.15.8 Ping Diagnosis............................................................................................................ 191
3.15.9 Trace Route................................................................................................................ 192
4
Application and Examples............................................................................193
4.1 Create a LAN-to-LAN Connection Between Remote Office and Headquarter................... 193
4.2 Create a Remote Dial-in User Connection Between the Teleworker and Headquarter...... 200
4.3 QoS Setting Example.......................................................................................................... 204
4.4 LAN – Created by Using NAT ............................................................................................. 207
4.5 Calling Scenario for VoIP function ...................................................................................... 209
4.5.1 Calling via SIP Sever.................................................................................................... 209
4.5.2 Peer-to-Peer Calling..................................................................................................... 211
4.6 Upgrade Firmware for Your Router..................................................................................... 213
4.7 Request a certificate from a CA server on Windows CA Server......................................... 215
4.8 Request a CA Certificate and Set as Trusted on Windows CA Server............................... 219
5
Trouble Shooting...........................................................................................221
5.1 Checking If the Hardware Status Is OK or Not.................................................................... 221
5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ................. 222
5.3 Pinging the Router from Your Computer............................................................................. 224
5.4 Checking If the ISP Settings are OK or Not........................................................................ 225

Vigor2930 Series User’s Guide vii
5.5 Backing to Factory Default Setting If Necessary ................................................................ 227
5.6 Contacting Your Dealer....................................................................................................... 228

Vigor2930 Series User’s Guide 1
1
P Pr re ef fa ac ce e
Vigor2930 is a broadband router with dual-WAN interface. It provides policy-based
load-balance, fail-over and BOD (Bandwidth on Demand), also it integrates IP layer QoS,
NAT session/bandwidth management to help users control works well with large bandwidth.
By adopting hardware-based VPN platform, hardware encryption of AES/DES/3DS and
hardware key hash of SHA-1/MD5, the router increases the performance of VPN greatly,
and offers several protocols (such as IPSec/PPTP/L2TP) with up to 100 VPN tunnels.
The object-originated design used in SPI (Stateful Packet Inspection) firewall allows users to
set firewall policy with ease. CSM (Content Security Management) provides users control
and management in IM (Instant Messenger) and P2P (Peer to Peer) more efficiency than
before. By the way, DoS/DDoS prevention and URL/Web content filter strengthen the
security outside and control inside.
Vigor2930 “S” series models support two ISDN ports. ISDN S0 (1) port is dedicated for
ISDN phone and ISDN S0 (2) port is configurable for ISDN line and phone if required. It
can support multiple SIP registrars with high flexible configuration and call handling
options.
Object-oriented firewall is flexible and allows your network be safe. In addition, through
VoIP function, the communication fee for you and remote people can be reduced.
1
1. .1 1 W We eb b C Co on nf fi ig gu ur ra at ti io on n B Bu ut tt to on ns s E Ex xp pl la an na at ti io on n
Several main buttons appeared on the web pages are defined as the following:
Save and apply current settings.
Cancel current settings and recover to the previous saved settings.
Clear all the selections and parameters settings, including selection from
drop-down list. All the values must be reset with factory default settings.
Add new settings for specified item.
Edit the settings for the selected item.
Delete the selected item with the corresponding settings.
Note: For the other buttons shown on the web pages, please refer to Chapter 4 for detailed
explanation.

Vigor2930 Series User’s Guide
2
1
1. .2 2 L LE ED D I In nd di ic ca at to or rs s a an nd d C Co on nn ne ec ct to or rs s
Before you use the Vigor router, please get acquainted with the LED indicators and
connectors first.
The displays of LED indicators and connectors for the routers are different slightly. The
following sections will introduce them respectively.
D
De ef fi in ni it ti io on ns s f fo or r I IS SD DN N P Po or rt ts s
Below shows the names that displayed on front panel of the device and the WEB UI of this
device.
ISDN TE (Terminal Equipment) means an interface for transmitting analog signal through
Internet between Switching and router. Such interface is also named with ISDN S0 extern in
Germany.
ISDN NT (Network Terminator) is a port that used to connect general phone. Such interface
is also named with ISDN S0 intern in Germany.
The ISDN S0 (1) port on Vigor2930 series is fixed to connect phone forever and the LED on
the connecter will light orange always. However ISDN S0 (2) port on this device is
configurable for connecting phone or accessing Internet according to the settings that you
adjust on WEB UI (please refer to VoIP>>Phone Setting for detailed information).
Warning: When the orange LED lights (means ISDN NT mode), the ISDN
port can be used to connect phone only. Wrong ISDN connection might cause
severe damage on your device.

Vigor2930 Series User’s Guide 3
1
1. .2 2. .1 1 F Fo or r V Vi ig go or r2 29 93 30 0
LED Status Explanation
Blinking The router is powered on and running normally.ACT (Activity) Off The router is powered off.
On The DoS/DDoS function is active.DoS Blinking It will blink while deleting an attack.
CSM On The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from CSM >> IM/P2P Profile).
CPA (Content Portal Authority) On The Web Content Filter is active. (It is enabled
from CSM >> Web Content Filter Profile).
On The WAN1 or WAN2 port is connected.WAN1/2 Blinking It will blink while transmitting data.
On The router is managed (handled) by Telnet.MGMT Blinking It will blink while being managed by IE browser.
VPN On The VPN tunnel is active.
QoS On The QoS function is active.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green) Off The port is disconnected with 10Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green) Off The port is disconnected with 10Mbps.
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart Restart the router forcefully.
WAN(1/2) Connecters for remote networked devices.
LAN (1-4) Connecters for local networked devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor2930 Series User’s Guide
4
1
1. .2 2. .2 2 F Fo or r V Vi ig go or r2 29 93 30 0n n
LED Status Explanation
Blinking The router is powered on and running normally.ACT (Activity) Off The router is powered off.
On The DoS/DDoS function is active.DoS Blinking It will blink while deleting an attack.
CSM On The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from CSM >> IM/P2P Profile).
On Wireless access point is ready. WLAN Blinking It will blink while wireless traffic goes through.
It will blink fast when WPS is working and it will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On The WAN1 or WAN2 port is connected.WAN1/2 Blinking It will blink while transmitting data.
On The router is managed (handled) by Telnet.MGMT Blinking It will blink while being managed by IE browser.
VPN On The VPN tunnel is active.
QoS On The QoS function is active.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green) Off The port is disconnected with 10Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green) Off The port is disconnected with 10Mbps.
Interface Description
Factory Reset Press "Factory Reset" button once to make network connection through WPS.
Press "Factory Reset" button twice to enable or disable WLAN function.
Press "Factory Reset" button for 5 seconds to do the factory reset.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart Restart the router forcefully.
Phone (1/2) Connecters for PSTN phones.
WAN (1/2) Connecters for remote networked devices.

Vigor2930 Series User’s Guide 5
LAN (1-4) Connecters for local networked devices.
PWR Connecter for a power adapter..
ON/OFF Power Switch.

Vigor2930 Series User’s Guide
6
1
1. .2 2. .3 3 F Fo or r V Vi ig go or r2 29 93 30 0V Vn n
LED Status Explanation
Blinking The router is powered on and running normally.ACT (Activity) Off The router is powered off.
On The DoS/DDoS function is active.DoS Blinking It will blink while deleting an attack.
CSM On The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from CSM >> IM/P2P Profile).
On Wireless access point is ready. WLAN Blinking It will blink while wireless traffic goes through.
It will blink fast when WPS is working and it will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On The WAN1 or WAN2 port is connected.WAN1/2 Blinking It will blink while transmitting data.
On The router is managed (handled) by Telnet.MGMT Blinking It will blink while being managed by IE browser.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Phone 1/2
Blinking A phone call comes.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green) Off The port is disconnected with 10Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green) Off The port is disconnected with 10Mbps.
Interface Description
Factory Reset Press "Factory Reset" button once to make network connection through WPS.
Press "Factory Reset" button twice to enable or disable WLAN function.
Press "Factory Reset" button for 5 seconds to do the factory reset.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart Restart the router forcefully.
Phone (1/2) Connecters for PSTN phones.
WAN (1/2) Connecters for remote networked devices.

Vigor2930 Series User’s Guide 7
LAN (1-4) Connecters for local networked devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor2930 Series User’s Guide
8
1
1. .2 2. .4 4 F Fo or r V Vi ig go or r2 29 93 30 0V VS S
LED Status Explanation
Blinking The router is powered on and running normally.ACT (Activity) Off The router is powered off.
On The DoS/DDoS function is active.DoS Blinking It will blink while deleting an attack.
CSM On The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from CSM >> IM/P2P Profile).
CPA (Content Portal Authority) On The Web Content Filter is active. (It is enabled
from CSM >> Web Content Filter Profile)
On The WAN1 or WAN2 port is connected.WAN1/2 Blinking It will blink while transmitting data.
On The router is managed (handled) by Telnet.MGMT Blinking It will blink while transmitting data.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Phone 1/2
Blinking A phone call comes.
LED on Connector
On ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
Left LED
(Orange) Blinking ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
On A phone has been connected. If not, green LED will
be off.
ISDN S0 1
Right LED
(Green) Blinking An ISDN phone is off-hook or a phone call comes.
On ISDN NT (ISDN S0 intern) mode is active
configured from VoIP>>Phone Settings and an
ISDN phone adapter is connected.
Blinking ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings is active and an ISDN
phone adapter is not connected.
Left LED
(Orange)
Off It means ISDN TE mode is active which is
configured from VoIP>>Phone Settings.
On A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
ISDN S0 2
Right LED
(Green)
Blinking In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice
(phone call) is transmitting.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green) Off The port is disconnected with 10Mbps.

Vigor2930 Series User’s Guide 9
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green) Off The port is disconnected with 10Mbps.
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart Restart the router forcefully.
Phone (1/2) Connecters for PSTN phones.
ISDN S0 1 Connecter for ISDN phone(s) only via ISDN phone adapter. Do not connect any
other device to such port or connect ISDN line, otherwise the router might be
damaged.
ISDN S0 2 Connecter for ISDN line or ISDN phone adapter in particular condition. Refer to
section 2.2 for more details.
WAN (1/2) Connecters for remote networked devices.
LAN (1-4) Connecters for local networked devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor2930 Series User’s Guide
10
1
1. .2 2. .5 5 F Fo or r V Vi ig go or r2 29 93 30 0V VS Sn n
LED Status Explanation
Blinking The router is powered on and running normally.ACT (Activity) Off The router is powered off.
On The DoS/DDoS function is active.DoS Blinking It will blink while deleting an attack.
CSM On The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from CSM >> IM/P2P Profile).
On Wireless access point is ready. WLAN Blinking It will blink while wireless traffic goes through.
It will blink fast when WPS is working and it will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On The WAN1 or WAN2 port is connected.WAN1/2 Blinking It will blink while transmitting data.
On The router is managed (handled) by Telnet.MGMT Blinking It will blink while being managed by IE browser.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Phone 1/2
Blinking A phone call comes.
LED on Connector
On ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
Left LED
(Orange) Blinking ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
On A phone has been connected. If not, green LED will
be off.
ISDN S0 1
Right LED
(Green) Blinking An ISDN phone is off-hook or a phone call comes.
On ISDN NT (ISDN S0 intern) mode is active
configured from VoIP>>Phone Settings and an
ISDN phone adapter is connected.
Blinking ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings is active and an ISDN
phone adapter is not connected.
Left LED
(Orange)
Off It means ISDN TE mode is active which is
configured from VoIP>>Phone Settings.
On A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
ISDN S0 2
Right LED
(Green)
Blinking In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice
(phone call) is transmitting.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
WAN 1/2
Right LED On The port is connected with 100Mbps.

Vigor2930 Series User’s Guide 11
(Green) Off The port is disconnected with 10Mbps.
On The port is connected.
Off The port is disconnected.
Left LED
(Green)
Blinking The data is transmitting.
On The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green) Off The port is disconnected with 10Mbps.
Interface Description
Factory Reset Press "Factory Reset" button once to make network connection through WPS
Press "Factory Reset" button twice to enable or disable WLAN function.
Press "Factory Reset" button for 5 seconds to do the factory reset.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart Restart the router forcefully.
Phone (1/2) Connecters for PSTN phones.
ISDN S0 1 Connecter for ISDN phone(s) only via ISDN phone adapter. Do not connect any
other device to such port or connect ISDN line, otherwise the router might be
damaged.
ISDN S0 2 Connecter for ISDN line or ISDN phone adapter in particular condition. Refer to
section 2.2 for more details.
WAN (1/2) Connecters for remote networked devices.
LAN (1-4) Connecters for local networked devices.
PWR Connecter for a power adapter.
ON/OFF Power Switch.

Vigor2930 Series User’s Guide
12
1
1. .3 3 H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
Before starting to configure the router, you have to connect your devices correctly.
1. Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router
with Ethernet cable (RJ-45). The WAN1/WAN2 LED (Left or Right) will light up
according to the speed (100 or 10) of the device that it connected.
2. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of the router and
the other end of the cable (RJ-45) into the Ethernet port on your computer. The LAN
LED (Left or Right) will light up according to the speed (100 or 10) of the device that it
connected.
3. Connect the telephone sets with phone lines (for using VoIP function). For the model
without phone ports, skip this step.
4. Connect one end of the power adapter to the router’s power port on the rear panel, and
the other side into a wall outlet.
5. Power on the device by pressing down the power switch on the rear panel.
6. The system starts to initiate. After completing the system test, the ACT LED will light
up and start blinking.
(For the detailed information of LED status, please refer to section 1.2.)
Caution: Each of the Phone ports can be connected to an analog phone only. Do not
connect the phone ports to the telephone wall jack. Such connection might damage
your router.