Draytek Vigor2765 Series User manual

i
Vigor2765/ 2766 Series
VDSL2/ G.Fast Security Router
Quick Start Guide
(Wireless models)
Guide Version: 1. 3
Region: United Kingdom & Ireland
For updat es and support , visit www.drayt ek. co. uk
August 2021 / Firmware V4.2.3_BT
Note: Product specification is subject to continuous evolution which may
not always be reflected in current documentation. For the formal specification
and details of the supported features of your product, please refer
only to the web site at www. drayt ek. co. uk
Regional and Network Compatibility
For al l model s, please check t hat you have been supplied wit h a device int ended f or your geographic region and net works.
Hardware and sof t ware varies by region, as well as local support and warrant y services. To be sure of compat ibilit y and local
support , ensur e t hat you ar e buying t he correct product t hr ough aut horized channels. The out side of t he pr oduct ’ s box will
st at e t he region compat ibilit y (e. g. “ Applied Region: UK” ). If you are unsure, check wit h DrayTek or your supplier. The use of
unof ficial component s (e. g. PSUs) or adapt ing int erfaces or t he use of unaut horized sof t war e/ f irmware may cause malf unct i on,
product damage or personal danger and invalidat es your warrant y and access t o support services.

ii
Safety and Warranty Information
Safet y
Instructions
Read t he inst allat ion gui de t horoughly bef ore you set up t he rout er.
The rout er is a compl icat ed elect ronic unit t hat may be repaired only be aut horized and qualified
per sonnel. Do not t ry t o open or r epair t he rout er yoursel f.
Do not pl ace t he r out er i n a damp or humid place, e. g. a bat hr oom.
Do not st ack t he rout ers.
The rout er should be used i n a shelt ered area, wit hin a t emperat ure range of 0 t o +40 Cel sius.
Do not expose t he rout er t o direct sunlight or ot her heat sources. The housing and elect ronic
component s may be damaged by di rect sunl ight or heat sources.
Do not deploy t he cable f or LAN connect i on out door t o pr event elect ronic shock hazards.
Keep t he package out of reach of children.
When you want t o dispose of t he rout er, please f ollow local regulat ions on conservat ion of t he
environment .
Warranty We war rant t o t he original end user (purchaser) t hat t he rout er will be f ree f rom any def ect s in
workmanship or mat er ial s f or a period of t wo (2) years f rom t he dat e of purchase f rom a DrayTek
aut horized deal er in t he UK/ Ireland. Pl ease keep your purchase r ecei pt i n a saf e pl ace as i t ser ves as proof
of dat e of purchase. During t he warrant y per iod, and upon proof of purchase, shoul d t he product have
indicat ions of f ailure due t o fault y workmanship and/ or mat erials, we wil l, at our discret ion, repair or
replace t he def ect ive product s or component s, wit hout charge f or eit her part s or labour, t o what ever
ext ent we deem necessary t ore-st or e t he pr oduct t o pr oper operat ing condit ion. Any r eplacement will
consist of a new or re-manuf act ured f unct ionally equival ent product of equal value, and wil l be of f ered
solel y at our discret ion. Thi s warrant y will not apply if t he product is modified, misused, t ampered wit h,
damaged by ext ernal f act ors, used wit h unapproved accessories or subj ect ed t o abnormal working
condit ions. Warrant y applies t o hardware only, not sof t ware or f ir mware. Def ect s which do not
signif icant ly af fect t he usabilit y of t he product will not be covered by t he warrant y. We reserve t he right
t o revise t he manual and online document at ion and t o make changes from t ime t o t ime in t he cont ent s
her eof wit hout obligat ion t o not if y any person of such revision or changes.
External Power Supply (Power Adapter) Information
1 2 3 4 5 6 7 8 9
A Manuf act urer CWT CWT CWT CWT CWT APD APD APD APD
B Address No. 222, Sec.
2, Nankan
Rd. , Luj hu
Township,
Taoyuan
Count y 338,
Taiwan
No. 222, Sec.
2, Nankan
Rd. , Luj hu
Township,
Taoyuan
Count y 338,
Taiwan
No. 222, Sec.
2, Nankan
Rd. , Luj hu
Township,
Taoyuan
Count y 338,
Taiwan
No. 222, Sec.
2, Nankan
Rd. , Luj hu
Township,
Taoyuan
Count y 338,
Taiwan
No. 222, Sec.
2, Nankan
Rd. , Luj hu
Township,
Taoyuan
Count y 338,
Taiwan
No.5, Lane 83,
Lung-Sou St .,
Taoyuan Cit y
330, Taiwan
No.5, Lane 83,
Lung-Sou St .,
Taoyuan Cit y
330, Tai wan
No.5, Lane 83,
Lung-Sou St .,
Taoyuan Cit y
330, Tai wan
No.5, Lane 83,
Lung-Sou St .,
Taoyuan Cit y
330, Taiwan
2ABB012F UK 2ABB018F UK 2ABL024F UK 2ABL030F UK 2ABN036F UK WA-12M12FG WB-18D12FG WA-24Q12FG WA-36A12FG C Model ident i f ier
2ABB012F EU 2ABB018F EU 2ABL024F EU
2ABL030F EU 2ABN036F EU WA-12M12FK WB-18D12FK WA-24Q12FK WA-36A12FK
D Input volt age 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V
Input AC f requency 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60HzE
Out p ut vol t age DC 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V
F Out p ut cur rent 1. 0A 1. 5A 2. 0A 2. 5A 3. 0A 1. 0A 1. 5A 2. 0A 3. 0A
G Out put power 12. 0W 18. 0W 24. 0W 30. 0W 36. 0W 12. 0W 18. 0W 24. 0W 36. 0W
H Average act i ve
ef f iciency
84.9% 86. 2% 87. 6% 87.8% 89. 8% 83. 7% 85. 4% 88. 6% 88. 2%
I Ef f i ci enc y at l ow l oad
10%
73.6% 78. 0% 81. 3% 83.3% 83. 7% 74. 5% 80. 5% 86. 4% 85. 4%
J No-load power
consumpt ion
0. 07W 0. 07W 0. 07W 0. 07W 0. 07W 0. 07W 0. 10W 0. 07W 0. 10W
For more updat es & i nf ormat ion, pl ease visit www. drayt ek. co. uk. The ext ernal power suppl y used f or each pr oduct will be
model dependent .
Join the UK mailing list Users in t he UK & Ireland can sign up t o our mailing list which goes out approximat ely 4
t imes per year wit h product s news, updat es, hi nt s & t ips and of fer s. For det ails, pl ease vi sit
www. drayt ek. co. uk/ list
Firmware & Tools Updates
Due t o t he cont inuous evolut ion of DrayTek t echnology and emerging r isks, r out er f irmware
updat es may be issued.
Please consult t he DrayTek web sit e f or more inf ormat ion on newest f irmware, t ools and
document s: www. dr ayt ek.co. uk (For UK/ Ireland)

iii
Declaration of Conformity
Hereby, DrayTek Corporat ion declares t hat t he radio equipment t ype Vigor2765 is in compliance wit h
Regulat ion SI 2017 No. 1206.
The full t ext of t he UKCA Declarat ion of Conf ormit y is available at t he f ollowing int ernet address:
ht t ps:/ / www. drayt ek. com.t w/ ft p/ Vigor2765/ Document / UKCA/
ht t ps:/ / www. drayt ek. com.t w/ ft p/ Vigor2766/ Document / UKCA/
Manuf act ur er: Dr ayTek Cor p.
Address: No. 26, Fushing Rd., Hukou, Hsinchu Indust rial Park, Hsinchu 303, Taiwan
Product : Vigor2765/ 2766 Wireless Series
Import er: SEG, 11 Capit al Business Park, Borehamwood, Hert s, WD6 1GW
Frequency Inf ormat ion f or UK area:
2. 4G WLAN 2412MHz - 2472 MHz, max. TX power: 19. 79dBm *1
5G WLAN 5160MHz - 5340 MHz, max. TX power: 22. 74dBm *2
5480MHz - 5720 MHz, max. TX power: 29. 88dBm
Requi rement s i n UK. 5150MHz~5350MHz i s f or i ndoor use only.
(*1: f or 2. 4G WLAN model; *2: f or 5G WLAN model)
This product is designed f or DSL and 2. 4GHz / 5GHz WLAN net work use in t he UK & Ireland.
Declaration of Conformity
Hereby, DrayTek Corporat ion declares t hat t he radio equipment t ype Vigor2765 is in compliance wit h
Direct ive 2014/ 53/ EU.
The full t ext of t he EU declarat ion of conformit y is availabl e at t he f ollowing int ernet address:
ht t p: / / www.drayt ek. com.t w/ f t p/ Vigor2765/ Document / CE/
ht t p: / / www.drayt ek. com.t w/ f t p/ Vigor2766/ Document / CE/
Manuf act ur er: Dr ayTek Cor p.
Address: No. 26, Fushing Rd., Hukou, Hsinchu Indust rial Park, Hsinchu 303, Taiwan
Product : Vigor2765/ 2766 Wireless Series
Import er: SEG, 11 Capit al Business Park, Borehamwood, Hert s, WD6 1GW
Frequency Inf ormat ion for Europe area:
2. 4G WLAN 2412MHz - 2472 MHz, max. TX power: 19. 79dBm *1
5G WLAN 5160MHz - 5340 MHz, max. TX power: 22. 74dBm *2
5480MHz - 5720 MHz, max. TX power: 29. 88dBm
Requirement s in AT/ BE/ BG/ CZ/ DZ/ DK/ EE/ FR/ DE/ IS/ IE/ IT/ EL/ ES/
CY/ LV/ LI/ LT/ LU/ HU/ MT/ NL/ NO/ PL/ PT/ RO/ SI/ SK/ TR/ FI/ SE/ CH/
HR. 5150MHz~5350MHz is f or indoor use only.
(*1: f or 2. 4G WLAN model; *2: f or 5G WLAN model)
This product is designed f or DSL and 2. 4GHz / 5GHz WLAN net work t hroughout t he EC region.

iv
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Package Contents................................................................................................. 1
2. Panel Explanation................................................................................................. 2
2.1 Vigor2765ac/Vigor2766ac .......................................................................................................... 2
2.2 Vigor2765Vac/Vigor2766Vac...................................................................................................... 4
3. Hardware Installation ........................................................................................... 6
3.1 Connecting up the Vigor Router................................................................................................. 6
3.2 Wall-Mounting the Vigor 2765 .................................................................................................... 7
4. Setup & Configuration.......................................................................................... 8
4.1 Accessing the Router Web Interface..........................................................................................8
4.2 WAN1 – ADSL & VDSL Connection Setup ...............................................................................11
4.2.1 PPPoE connection with FTTC VDSL2........................................................................ 11
4.2.2 DHCP / Static IP connection with FTTC VDSL2......................................................... 14
4.2.3 PPPoA connection with ADSL / ADSL2+.................................................................... 17
4.3 WAN2 – Ethernet Connection Setup........................................................................................ 18
4.3.1 Enabling the Ethernet WAN Port ................................................................................ 19
4.3.2 PPPoE......................................................................................................................... 20
4.3.3 Static or Dynamic IP.................................................................................................... 21
4.4 WAN3 / WAN4 – 3G / 4G USB Modem Setup ......................................................................... 23
4.4.1 PPP Mode ................................................................................................................... 23
4.4.2 DHCP Mode ................................................................................................................ 25
5. Getting Further Help........................................................................................... 26
5.1 Additional Feature Setup.......................................................................................................... 26
5.2 Keep up to date with our mailing list ........................................................................................ 26
5.3 Firmware Updates.................................................................................................................... 27
5.4 Security & Router Best Practice............................................................................................... 27

1
1
1. . P Pa ac ck ka ag ge e C Co on nt te en nt ts s
DrayTek Vigor router Quick Start Guide
(This document)
RJ-45 Cable (Ethernet)
(Connects to your PC or Switch)
RJ-11 to RJ-11 Cable
(Connects to your DSL line)
UK Power Adapter Antenna
The maximum power consumpt ion is 17-23 Wat t s.
Important
Note
Remove t he prot ect ive f ilm f rom t he rout er before use t o
ensure vent ilat ion.

2
2
2. . P Pa an ne el l E Ex xp pl la an na at ti io on n
2
2. .1 1 V Vi ig go or r2 27 76 65 5a ac c/ /V Vi ig go or r2 27 76 66 6a ac c
LED Status Explanation
Blinking The rout er is ready and operat ing normally
(Act ivit y) Of f The rout er is powered of f
On DSL connect ion synchronised
Blinking
(Slowly)
DSL connect ion not current ly synchronizing or
not det ect ed
(DSL)
Blinking
(Quickly)
DSL connect ion is synchronising
On (Green) 2. 4GHz Access Point is act ive
Blinking
(Green)
Dat a is being t ransmit t ed on t he rout er’ s 2. 4
GHz wireless int erface
Blinking
(Orange)
WPS pairing mode is act ive f or t wo minut es
(Wireless LAN
On/ Of f/ WPS)
Of f 2. 4GHz Access Point is t urned of f
On (Green) 5GHz Access Point is act ive
Blinking
(Green)
Dat a is being t ransmit t ed on t he rout er’ s 5GHz
wireless int erf ace
(Wireless LAN
On/ Of f/ WPS) Blinking
(Orange)
WPS pairing mode is act ive f or t wo minut es
On Et hernet LAN (RJ45) is connect ed
Blinking Dat a is t ransmit t ing (sending/ receiving)
~
(LAN1/ 2/ 3/ 4)
Of f Et hernet LAN is disconnect ed
On USB device is connect ed and ready f or use
(USB) Blinking Dat a is being t ransmit t ed over USB

3
Interface Description
WLAN
ON/ OFF/ WPS
Press f or less t han 2 seconds t o swit ch t oggle t he rout er’ s
wireless int erf aces:
For example,
2. 4G (On) and 5G (On) – Def ault st at e.
2. 4G (Of f ) and 5G (On) – press and release t he but t on once.
2. 4G (On) and 5G (Of f ) – press and release t he but t on
t wice.
2. 4G (Of f ) and 5G (Of f ) – press and release t he but t on
t hree t imes.
When WPS is enabled in t he rout er’ s web int erf ace, press t his
but t on f or more t han 2 seconds t o enable WPS pairing mode.
Fact ory Reset Rest ore t he def ault set t ings.
Usage: Turn on t he rout er (ACT LED is blinking). Press gent ly
and hold f or more t han 5 seconds. When t he ACT LED blinks
rapidly, release t he but t on. Then t he rout er will rest art wit h
t he f act ory default conf igurat ion
USB1~USB2 Connect or f or a USB 3G/ 4G modem, st orage, print er or USB
Thermomet er
P1~P4 RJ-45 Gigabit Et hernet connect ors for local net work devices.
LAN port P4 can be conf igured as t he Et hernet WAN port , see
Sect ion 5. 3 f or det ails
DSL RJ-11 connect or f or ADSL or VDSL line
I/ O Power Swit ch. Turns t he unit on (I) or off (O)
PWR Connect or for t he power adapt er

4
2
2. .2 2 V Vi ig go or r2 27 76 65 5V Va ac c/ /V Vi ig go or r2 27 76 66 6V Va ac c
LED Status Explanation
Blinking The rout er is ready and operat ing normally
(Act ivit y) Of f The rout er is powered of f
On DSL connect ion synchronised
Blinking
(Slowly)
DSL connect ion not current ly synchronising or
not det ect ed
(DSL)
Blinking
(Quickly)
DSL connect ion is synchronising
On The phone connect ed t o t his port is of f-hook
Of f The phone connect ed t o t his port is on-hook
Blinking A phone call is incoming
On (Green) 2. 4GHz Access Point is act ive
Blinking
(Green)
Dat a is being t ransmit t ed on t he rout er’ s 2. 4
GHz wireless int erface
Blinking
(Orange)
WPS pairing mode is act ive f or t wo minut es
(Wireless LAN
On/ Of f/ WPS)
Of f 2. 4GHz Access Point is t urned of f
On (Green) 5GHz Access Point is act ive
Blinking
(Green)
Dat a is being t ransmit t ed on t he rout er’ s 5GHz
wireless int erf ace
Blinking
(Orange)
WPS pairing mode is act ive f or t wo minut es
(Wireless LAN
On/ Of f/ WPS)
Of f 5GHz Access Point is t urned of f
On Et hernet LAN (RJ45) is connect ed
Blinking Dat a is t ransmit t ing (sending/ receiving)
~
(LAN1/ 2/ 3/ 4)
Of f Et hernet LAN is disconnect ed
On USB device is connect ed and ready f or use
(USB) Blinking Dat a is being t ransmit t ed over USB

5
Interface Description
WLAN
ON/ OFF/ WPS
Press f or less t han 2 seconds t o swit ch t oggle t he rout er’ s
wireless int erf aces:
For example,
2. 4G (On) and 5G (On) – Def ault st at e.
2. 4G (Of f ) and 5G (On) – press and release t he but t on
once.
2. 4G (On) and 5G (Of f ) – press and release t he but t on
t wice.
2. 4G (Of f ) and 5G (Of f ) – press and release t he but t on
t hree t imes.
When WPS is enabled in t he rout er’ s web int erf ace, press
t his but t on f or more t han 2 seconds t o enable WPS pairing
mode.
Fact ory Reset Rest ore t he def ault set t ings.
Usage: Turn on t he rout er (ACT LED is blinking). Press gent ly
and hold f or more t han 5 seconds. When t he ACT LED blinks
rapidly, release t he but t on. Then t he rout er will rest art wit h
t he f act ory default conf igurat ion
USB1~USB2 Connect or f or a USB 3G/ 4G modem, st orage, print er or USB
Thermomet er
P1~P4 RJ-45 Gigabit Et hernet connect ors for local net work devices.
LAN port P4 can be configured as t he Et hernet WAN port , see
Sect ion 5. 3 f or det ails
DSL RJ-11 connect or f or ADSL or VDSL line
Phone2/ Phone1 RJ-11 connect ors f or VoIP usage wit h analogue t elephones
I/ O Power Swit ch. Turns t he unit on (I) or off (O)
PWR Connect or f or t he power adapt er

6
3
3. . H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
3
3. .1 1 C Co on nn ne ec ct ti in ng g u up p t th he e V Vi ig go or r R Ro ou ut te er r
Here we t ake Vigor2765ac as an example.
1. ADSL/ VDSL Connections: Connect t he DSL por t t o t he Modem or DSL por t of t he
ext ernal split t er/ microf ilt er (not supplied) wit h t he RJ-11 line cable. In some
cases, your RJ-11 DSL socket will be built -int o your phone line socket on t he wall
and you won’ t have a separat e microf ilt er/ split t er.
2. LAN Connections: Connect a LAN port of t he rout er t o your comput er or sw i t ch.
3. Wireless Antennas: Connect t he wireless ant ennas t o t he rout er
4. Power Supply: Connect t he power adapt er t o t he Vigor 2765’ s PWR socket on
t he rear and plug t he power adapt er int o a suit able mains socket .
Turn t he Vigor 2765 on using it s power swit ch.
5. The rout er will st art up. Aft er complet ing t he syst em t est , t he ACT LED will light
up and st art blinking once per second t o indicat e t hat it is ready f or use.
For more det ailed inf ormat ion of LED st at us, please refer t o sect ion 3. 1 Front
Panel Overview.
6. Ethernet-based Internet Connections: LAN port P4 can be swit ched t o operat e
as t he Et hernet WAN port . This must be conf igured in t he rout er’ s web int erf ace
bef ore it can operat e in t his mode – Sect ion 5.3 of t his Quick St art Guide det ails
how t o do t hat .

7
3
3. .2 2 W Wa al ll l- -M Mo ou un nt ti in ng g t th he e V Vi ig go or r R Ro ou ut te er r
DrayTek Vigor 2765/ 2766 series rout ers have keyhole t ype mount ing slot s on t he
underside t o hang t he rout er on, using screws at t ached t o a wall or ot her
surf ace.
1. Drill t wo holes on t he wall. The dist ance bet ween t he holes shall be 168mm.
2. Fit screws int o t he wall using t he appropriat e t ype of wall plug
3. Wit h t he screws inst alled, t he rout er can be slot t ed int o place
Note
The recommended drill diamet er is 6. 5mm (1/ 4” ).

8
4
4. . S Se et tu up p & & C Co on nf fi ig gu ur ra at ti io on n
This sect ion provides examples of how t o init ially access t he rout er and conf igure
int ernet access for t he most common t ypes of Int ernet connect ion in t he UK.
If t he inst ruct ions in t his quick st art guide do not allow you t o get online wit h
your ISP or t ype of Int ernet connect ion, t here are addit ional guides available
from t he Product Knowledgebase on www.drayt ek.co. uk.
Note To access t he rout er, your PC will need t o eit her get it s IP
address using DHCP or have an IP address in t he 192. 168. 1. x
range.
For det ails on how t o change t his, please ref er t o t he “ Trouble
Shoot ing” sect ion in t he User Guide.
4
4. .1 1 A Ac cc ce es ss si in ng g t th he e R Ro ou ut te er r W We eb b I In nt te er rf fa ac ce e
Open a web browser on your PC and t ype https:/ / 192.168.1. 1.
The ht t ps: / / pref ix ensures t hat your connect ion is encrypt ed using SSL so t hat
your session dat a cannot be int ercept ed. Wit hout t hat pref ix, your dat a passes in
clear t ext .
You may get a warning f rom your browser (IE, Chrome, Edge, Saf ari et c. ) about
your server (t he rout er) having an invalid cert if icat e. Your browser will demand
furt her conf irmat ion or except ion bef ore allowing access. The warnings will look
somet hing like t hese examples.
An example of how t o access t he rout er via HTTPS wit h Mozilla Firefox:

9
An example from Microsof t Edge, click “ Cont inue t o t his webpage” t o proceed:
Most ot her browsers will present equivalent warnings. In each case, following t he
prompt s/ links will allow you t o access t he rout er's web int erface. It is st ill
encrypt ed wit h SSL/ TLS.
Note This warning appears because t he rout er's def ault cert ificat e is
'self -signed' rat her t han issued t o you by a cert if icat e aut horit y
who has verif ied your ident it y.
A self -signed cert if icat e means t hat you cannot verif y t he
ident it y of t he server, but as it 's your own local rout er, t hat
shouldn't be an issue - your connect ion is st ill encrypt ed.
The rout er login prompt will t hen request a username and password t o allow
access. Here we t ake Vigor2765 as an example.
The f act ory def ault login det ails are:
Username: admin
Password: admin

10
Note If you cannot access t he web int erf ace, please go t o t he “ Trouble
Shoot ing” sect ion in t he User Guide t o det ermine t he cause of
and solve your problem.
Upon successf ul login, t he rout er will display t he Dashboard, which shows a
summary of t he rout er model, WAN st at us, f ront panel port st at us and ot her
inf ormat ion:
Note We recommend conf iguring a secure password when f irst logging
in t o t he rout er’ s administ rat ion int erface.
The rout er’ s administ rat ion password can be changed f rom
[System Maintenance] > [Administrator Password]

11
4
4. .2 2 W WA AN N1 1 – – A AD DS SL L & & V VD DS SL L C Co on nn ne ec ct ti io on n S Se et tu up p
The WAN1 int erf ace of t he Vigor 2765 rout er can connect t o VDSL2 / 35b and
ADSL2+ lines.
If your Int ernet connect ion uses VDSL2 and your ISP has supplied you wit h a
Username and Password t o connect t o t he Int ernet , go t o sect ion
4.2.1 PPPoE connection with FTTC VDSL2
If your Int ernet connect ion uses VDSL2 and your ISP does not supply or require a
Username and Password t o connect t o t he Int ernet , go t o sect ion
4.2.2 DHCP / Static IP connection with FTTC VDSL2
If your Int ernet connect ion uses ADSL or ADSL2+ and your ISP has supplied you
wit h a Username and Password t o connect t o t he Int ernet , go t o sect ion
4.2.3 PPPoA connection with ADSL / ADSL2+
4
4. .2 2. .1 1 P PP PP Po oE E c co on nn ne ec ct ti io on n w wi it th h F FT TT TC C V VD DS SL L2 2
1. Go t o [WAN] > [General Setup] and click on t he WAN1 link:
2. On t he set t ings page:
Set t he Enable opt ion t o Yes t o act ivat e t he WAN1 connect ion
Set t he Act ive Mode t o Always On
Enable t he Service – VLAN Tag insertion
Set t he Tag value set t ing t o 101
DSL mode can be set t o “ VDSL2 only” but t his is not required
Note The VLAN t ag value of 101 is required t o connect t o ISPs t hat
operat e on t he Openreach VDSL2 net work, if your ISP operat es
on a diff erent VDSL2 net work, t his t ag value may dif fer.
Please check wit h your ISP or t he DrayTek UK Knowledgebase f or
ISP specif ic guides.

12
Click OK on t hat page t o apply t he changes.
3. Go t o [WAN] > [Internet Access]
Set t he WAN1 Access Mode t o PPPoE / PPPoA, t hen click t he Details Page
but t on t o proceed:
4. On t he PPPoE / PPPoA set t ings t ab:
Select t he Enable radio but t on at t he t op of t he page t o ensure t hat t he PPPoE
int erface is enabled.
In t he ISP Access Setup sect ion, input t he ISP username int o t he Username f ield
and password in t he Password field.
If your ISP has provided a st at ic IP address, t hat can be specif ied by set t ing t he
Fixed IP set t ing t o Yes and ent ering t he IP in t he Fixed IP Address field.

13
Click OK on t his page t o apply t he changes and t he rout er will t hen prompt t o
rest art . Click t he OK but t on t o rest art t he rout er.
5. Once t he rout er has rest art ed, t he [Online Status] > [Physical Connection]
page will display t he VDSL inf ormat ion and PPP connect ion st at us, if t he
WAN1 sect ion shows an IP address, it has connect ed t o t he int ernet
successfully:

14
Note If t he WAN 1 IP address displayed begins wit h 172. 16. x. x, it ’ s
possible t hat t he ISP has not accept ed t he supplied Username
and Password f or t he Int ernet connect ion.
Check t hat t he ISP Access Set up - Username and Password mat ch
t he det ails supplied by your ISP.
4
4. .2 2. .2 2 D DH HC CP P / / S St ta at ti ic c I IP P c co on nn ne ec ct ti io on n w wi it th h F FT TT TC C V VD DS SL L2
2
1. Go t o [WAN] > [General Setup] and click on t he WAN1 link:
2. On t he set t ings page:
Set t he Enable opt ion t o Yes t o act ivat e t he WAN1 connect ion
Set t he Act ive Mode t o Always On
Enable t he Service – VLAN Tag insertion
Set t he Tag value set t ing t o 101
DSL mode can be set t o “ VDSL2 only” but t his is not required
Note The VLAN t ag value of 101 is required t o connect t o ISPs t hat
operat e on t he Openreach VDSL2 net work, if your ISP operat es on
a dif ferent VDSL2 net work, t his t ag value may dif fer.
Please check wit h your ISP or t he DrayTek UK Knowledgebase f or
ISP specif ic guides.

15
Click OK on t hat page t o apply t he changes.
3. Go t o [WAN] > [Internet Access]
Set t he WAN1 Access Mode t o MPoA / Static or Dynamic IP, t hen click t he
Details Page but t on t o proceed:
4. In t he MPoA / St at ic or Dynamic IP set t ings:
Select t he Enable opt ion and sel ect Obtain an IP address automatically which
will obt ain an IP f rom t he ISP using DHCP.
If your ISP has provided a st at ic IP range, wit h a Net work address and a Subnet
Mask, specif y t hat wit h t he Specify an IP address opt ion.

16
Click OK on t his page t o apply t he changes and t he rout er will t hen prompt t o
rest art . Click t he OK but t on t o rest art t he rout er.
5. Once t he rout er has rest art ed, t he [Online Status] > [Physical Connection]
page will display t he VDSL inf ormat ion and DHCP connect ion st at us, if t he
WAN1 sect ion shows an IP address, it has connect ed t o t he int ernet
successfully: