Dream On Me 662 User manual

Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
ITEM NO: 662
1
s
Follow warnings on all products in a crib .
Please note that the warning sticker is placed on the cribs to keep
parents and caregivers informed it is a requirement by law under
CPSC and ASTM.We do apologize for any inconvenience this may
cause you.
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788

2

.Read all instructions before assembling crib, keep instructions for future use.
.Upon completion of assembly be sure all screws, bolts and fastening devices have been
securely tightened. A frequent check should be made.
.Infants can suffocate in gaps between a mattress too small or too thick and product sides,
on soft bedding never add a mattress, pillow,comforter or padding.
.CAUTION: Any mattress used in this crib must be at least 27-1/4inches(690mm) by 51-5/8
inches(1310mm),with a thickness not exceeding 6 inches(150mm), the dimensions of the
.Failure to follow these warnings and the in structions could result in serious injury or death.
.Never use plastic shipping bag or other plastic film as mattress covers not sold and
intended for that purpose, they can cause suffocation .
.Strings can cause strangulation! Never place items with a string around a child’s neck,
.Never use this product if there are any loose or missing fasteners, loose joints,broken
parts, or torn mesh/fabric. check before assembly and periodically during use.
Contact DREAM ON ME for replacement parts and instructional literature if needed.
.Never substitute parts, the product including side rails, must be fully erected prior to use.
.Discontinue use of the product when child is able to climb out or reaches the height of
.When child is able to pull to standing position,set mattress/base to lowest adjustment
positionand remove bumper pads, large toys ,and other objects that could serve as steps
for climbing out. A child can trap parts of the body or clothing on loose fasteners .
.Never use a water mattress with this product.
.If refinishing,use a non-toxic finish specified for children’s products.
.To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their
back to sleep, unless otherwise advised by your physician.
WARNING !
.Never place product near window where cords from blinds or drapes can strangle a child.
MADE IN CHINA
35in (900mm).
mattress shall be taken from seam to seam or edge to edge where appropriate.
such as hood strings or pacifier cords. Never suspend strings over product or attach
strings to toys.
.Infants can suffocate on soft bedding .
.Never add a pillow or comforter .
.Never place additional padding under an infant .
.To help prevent strangulation tighten all fasteners.
.A child can trap parts of the body or clothing on loose fasteners.
.Follow warnings on all products in a crib .
See head panel & mattress support of the product for warnings.
Replace teething rail if damaged,cracked or loose.
3

#
#
#
#
=
#
#
#
#
(
4

5
d:1-9/16” Wood dowels (14pcs)
Allen wrench supplied
a:3” Allen head bolt (8 pcs) b:1-9/16” Allen head bolt (16 pcs)
e:Barrel nuts (8 pcs)
f:Cams (10 pcs)
g:Cam bolts (10 pcs)
c:3/4” Allen head bolt (4 pcs)
PHILLIPS--HEA D SCREW DRIVER REQU IRED FO R
ASSEMBLY ----NOT INCLUDE

6
A.Headboard (1pc) B.Rear Left Leg (1pc) C.Rear Right Leg (1pc) D.Left Side Panel (1pc)
G.Front Right Leg (1pc) H.Top Rail (2pcs)
L.Mattress Support Frame (1pc)
M.Drawer Front (1pc)
P.Drawer Left (1pc) S.Drawer Divider (1pc)Q.Drawer Right (1pc) R.Drawer Bottom (2pcs)
N.Drawer Rear (1pc)
J.Front Panel (1pc)
E.Right Side Panel (1pc) F.Front Left Leg (1pc)
K:The bottom bar (1pc)
K
K

7
STEP 1
STEP 2
Drawer Assembly Steps:
Attach 2pcs wood dowels (d) into bottom holes of Drawer Divider (S).
Screw 10pcs Cam Bolts (g) into white inserts of parts (M, N,P,Q).
Align Drawer parts (N,Q,S,P).
O
O
g
g
g
g
g
g
d
dg
g
g
g
M
N
P
O
O
QS
Insert 4pcs of Cams (f) to Rear (N), insert 1pc of Cam (f) to Divider (S), then use
screwdriver (not provided) to rotate clockwise 1/4 turn to lock the 5 Cam Bolts (g).
Slide the Drawer Bottoms (R) into the grooves of (N,Q,S,P).
(Pictures are rear views of drawer)
(Pictures are rear views of drawer)
f
f
f
f
f
R
S
P
O
O
Q
N
R
g
f

8
STEP 3
STEP 4
Align parts (M,Q,S,P).
Insert 4 pcs of Cams (f) to (Q,P),insert 1pc of Cam (f) to Divider (S), then use
screwdriver (not provided) to rotate clockwise 1/4 turn to lock the 5pcs of Cam
Bolts (g).
f
f
f
g
gg
d
g
g
ff
M
S
P
O
O
Q
N
Drawer complete.
(Pictures are rear views of drawer)
(Pictures are rear views of drawer)

9
STEP 6
H
E
G
C
H
D
B
F
b
b
dd
d
d
b
b
b
b
b
b
b
b
b
b
Left Side Right Side
Insert 2pcs W ood Dowels (d) into side hole s of Headboard (A) then align Left and
Right Side Panels to Headboard (A).
Insert 4pcs Barrel Nuts (e) and thread 4pcs Allen Head Bolts (a) through rear Legs
(B, C) to Headboard (A).
d
ee
e
e
da
a
a
a
A
BC
bd
d
b
d
b
d
b

10
STEP 7
STEP 8
F
y.
Attach Mattress Support Frame (L) with 4pcs Allen Head Bolts (c) to brackets on 4 legs.
Complete Crib with Drawer
Make sure the Warning Envelope is installed FACE UP.
Check components periodically, make sure hinges are
tightened properly and securely.
.
#
#
#
#
HE
%
%

11
Converting crib to a toddler bed
K
(toddler rail and converting bolts are sold separately)
！
Failure to follow these warning and the assembly instructions could result in serious injury or
death from entrapment or strangulation. DO NOT place bed near windows where cords
from blinds or drapes may strangle a child. DO NOT place items with a string,cord,or ribbon
around a child’s neck,such as a hood, strings or pacifier cords. DO NOT suspend strings
over a toddler bed for any reason.
WARNING FOR TODDLER BED USE
The mattress intended for use on the bed shall be a full-size crib mattress having the
dimensions of 51-5/8” (1310 mm) in length and 27-1/4”(690mm) in width and thickness of
4” (100mm) or a greater thickness as specified by the manufacture. The minimum age of the
intended user shall not be less than 15 months and the maximum weight shall not be greater
than 50lbs(22.7kgs).
AVERTISSEMENT POUR UTILISATION DE LIT POUR ENFANTS
！
Le non-respect de ces avertissements et instructions de montage peut provoquer des blessures
graves ou la mort de piégeage ou de strangulation.
cordons de stores ou rideaux, ça peuvent étrangler l’enfant.NE PAS placer des objets avec une
ficelle, corde, ruban ou autour du cou d'un enfant, comme un capot, des chaînes ou cordes de
sucette.NE PAS suspendre des chaînes sur un lit d'enfant pour une raison quelconque.
Le matelas destinés à être utilisés sur le lit doit être un matelas de lit avec de pleine grandeur ayant
les dimensions de 51-5/8" (1310 mm) de longueur et 27-1/4" (690mm) de largeur et épaisseur de 4"
(100 mm) ou une épaisseur plus grande que spécifié par le fabricant. L'âge minimum de l'utilisateur
visé ne doit pas être inférieur à 15 mois et le poids maximal ne doit pas être supérieur à 50
lbs(22.7kgs).
Notez que l'autocollant d'avertissement est placé sur les berceaux pour tenir les parents et les
soignants informés que c'est une exigence de la loi en vertu de la CPSC et ASTM.
Nous faisons des excuses pour tout inconvénient que cela pourrait vous causer.
NE PAS placer le lit près d'une fenêtre où les
G
F
K
a
d
e

12
Converting crib to a full size bed I
Converting kit is sold separately
You have the option to convert
crib to a full size bed I
1:Use the front rail as the
footboard of full size bed I;
2:Use the back rail as the
headboard of full size bed I;
3:Connect the front rail and the
back rail to the kits ( legs, long
rails,and hardware ) which are
not included and sold separately.
Converting crib to a day bed
You have the option to convert crib to a day bed
1.Remove The front panel(J).
2.Install the mattress support (L) in its lowest position .
3.Assemble the bottom bar (K) to the front left Leg(F)
and the front right leg(G) by Allen head
bolts(a),Barrel nuts(e) and wood dowels.
G
F
L
K
a
d
e
K
(Hollywood bed frame sold separately)

13
Model shown is example only.
Styles may vary .
You have the option to convert crib to a full size bed II
1:Use the back rail as the headboard of full size bed.
3:Connect the assembled parts and headboard of full size bed to the kits ( legs, long rails,and
hardware ) which are not included and sold se parately.
2:Connect the left foot platform and the right foot platform to the rail which are not included and
sold separately.
Converting kit is sold separately
LEFT FOOT PLATFORM
POST x 1
NOT INCLUDED
POST x 1
NOT INCLUDED
RIGHT FOOT PLATFORM POST x 1
NOT INCLUDED
RAIL
(Hollywood bed frame sold separately)

14
LIMITED WARRANTY
� Dream on Me warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
� This warranty covers 30 days from the date of original purchase.
� This warranty is valid only upon presentation of proof of purchase.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
� This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
� This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE