dreambaby Premium F660 Guide

Deluxe Bath Seat
with foam padding & heat sensing indicator
Premium Bath Seat
F660, F662, F663, F664
Release Button as
viewed from back
CARE & USE INSTRUCTIONS
BATH SEATS
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Read instructions carefully before use. There is no substitute for adult supervision.
Arm
Release
Slider
Back Support
Release
Slider
Base
Foam
padding
T-Bar
Release
Button
1
X - Colour changing
F661
F660
F661
F662
F663
F664
X
Too Hot
MK
PRINTER: KW
DREAMBABY F
ART
DATE: 28 / 02 / 20184 pages NOTE:
F660-F664 Bath Seat_IM_28.02.2018_ART
FLAT : w297mm x h210mm / FOLDED : w148.5 x h210mm BLACK

A B C D
EG H
Y
I
F
WARNING-
Children have DROWNED
while using bath aids.
This is NOT a safety device.
ALWAYS keep baby within arm’s reach.
NEVER leave baby in care of children.
2
X - F661 Deluxe Bath Seat
Specially designed by Dreambaby® for your baby’s comfort and your convenience.
Too Hot
Z
MK
PRINTER: KW
DREAMBABY F
ART
DATE: 28 / 02 / 20184 pages NOTE:
F660-F664 Bath Seat_IM_28.02.2018_ART
FLAT : w297mm x h210mm / FOLDED : w148.5 x h210mm BLACK

TO USE
1. Insert the Arm into the Back Support (A & B).
2. Ensure the bath surface is clean and dry.
Consider the exact position the bath seat will be in
when in use.
Position away from taps to ensure children cannot
access them.
3. Press the bath seat down firmly for at least
1 minute to fully engage suction cups.
SUCTION CUPS MAY NOT GRIP ON SOME
TEXTURED OR ANTI-SLIP SURFACES. CHECK
SUCTION CUPS ARE FIRMLY IN PLACE.
4. To open the T-Bar, simultaneously slide
the “Release Slider” buttons away from
the T-Bar (C).
With “Release Slider” buttons pushed back, open
the T-Bar (E).
5. Add water to bath, starting wth cold water and
then add warm water.
Check the bath water temperature is between
(32.2 - 37.80ºC).
WARNING
Drowning can occur in a very short
time and in very shallow water -
as little as 2.5cm/1in.
Always bathe your infant using
as little water as necessary
do not exceed 10cm/4in.
6. Position baby in the seat.
Caution: Ensure bath seat is firmly secured to
bath tub before use.
7. To close the T-Bar, return the T-Bar and snap
closed under the “Release Slider” buttons (D).
Caution: To avoid any potential pinching, ensure
child is clear of the T-Bar when snapping shut.
NOTE: F661 Deluxe Bath Seat with heat sensing
indicator (X) - The heat sensitive temperature Star
indicator will change color if the water is too hot (Z).
TO REMOVE
• Release the seat from the bath by lifting the
tabs on the suction cups (F).
DO NOT PULL THE SEAT UP FROM THE
BATHTUB BEFORE RELEASING ALL OF
THE SUCTION CUPS.
TO FOLD AWAY FOR
EASY STORAGE (I)
• Press ’Release Button’ to free the Arm from
the Back Support (G & H).
• Rotate the Back Support into the underside
of the Base of the Seat (A).
TO CLEAN
• Wash in warm soapy water and air dry.
Thoroughly clean suction cups regularly to
avoid build up of soap scum.
Regularly check all parts.
Discontinue use if any parts are damaged
or missing.
WARNING
Suitable for babies able to sit up
unassisted (approx. 5 months of age).
STOP using when baby begins pulling
to a standing position
(approx. 10 months of age).
Babies can drown even when other
children are in or near the bathtub.
DO NOT allow other children to
substitute for an adult.
Never leave child unattended in the
bathroom there is no substitute for
adult supervision.
3
MK
PRINTER: KW
DREAMBABY F
ART
DATE: 28 / 02 / 20184 pages NOTE:
F660-F664 Bath Seat_IM_28.02.2018_ART
FLAT : w297mm x h210mm / FOLDED : w148.5 x h210mm BLACK

NOTE: ALWAYS ENSURE THAT
SECURING BAND IS FIXED IN BY SCREW.
Screw Securing Band
SAFETY CHECK:
Patent No. : US D573,800 S
Dreambaby
®
products by
Tee-Zed Products Pty Ltd
PO Box 2022
Bondi Junction NSW 1355
Australia
 [phone]
 [e-mail]
www.dreambaby.com.au
Tee-Zed Products (N.Z.) Ltd
PO Box 64013
Botany Town Centre Auckland
New Zealand
 [phone]
 [e-mail]
www.dreambaby.co.nz
Tee-Zed Products Ltd
PO Box 29227
Dunfermline, KY12 2DN
United Kingdom
 [phone]
 [e-mail]
www.dreambaby.co.uk
Made in Dongguan City, China.
©2018 Tee-Zed Products Pty Ltd
Look for the Dreambaby® range of Child Safety and Care Products.
Tee-Zed acknowledges that its customers may be entitled to statutory consumer guarantees and
does not seek to exclude or limit them. These guarantees include that Tee-Zed’s products are of
acceptable quality. This Tee-Zed product is for the specific purpose detailed in the instructions and
packaging and Tee-Zed considers use outside of that purpose to be abnormal use. To the maximum
extent permitted by law, Tee-Zed does not accept any liability for damage:
• arising from abnormal use of the products;
• caused by installation or removal of the products other than in accordance with the supplied
installation and removal instructions; or
• arising under the law of tort or contract.
For all enquiries, please call customer service,
Australia + 61 (0)2 9386 4000
New Zealand [phone]
United Kingdom [phone]
4
X.02
MK
PRINTER: KW
DREAMBABY F
ART
DATE: 28 / 02 / 20184 pages NOTE:
F660-F664 Bath Seat_IM_28.02.2018_ART
FLAT : w297mm x h210mm / FOLDED : w148.5 x h210mm BLACK