DroneTech GANNET 2+ User manual

CALIBRATION & STARTER USER MANUALGANNET 2+ / MAX +
32
• Powerful with payloads up to 2.5kg (Max lift test (NOT recommended)
5kgs)
• High-eciency rate with aerodynamics designed to be able to y in high
winds for longer
• Reliable with a trusted Pixhawk ight controller
• Weather resistant and sand proof remote so that it can be used on the
beach without worrying that sand will jam the remote sticks
• LCD display for drone telemetry, battery, and GPS status, use with or with-
out a smartphone, SD live video from the gimbaled camera so that it can
be used as an eective search and rescue drone with clear live SD video
• Multiple auxiliary attachment points for the addition of 4k action/360
cameras and spotlights
• Fully sealed electronics, preventing corrosion of electronics.
• Failsafe electro-mechanical payload release that can be mechanically or
electrically activated
• Bright onboard lights for easy night navigation
• Polycarbonate Semi-opaque shell to detect any leaks early on
• Motors OEM made by T- Motor
• Quick Release prop mounts
• Safety features. Release bait and return to home on low battery
• New Zealand Assembled, service and supported

CALIBRATION & STARTER USER MANUALGANNET 2+ / MAX +
54
No. Allocation
12.4Gh Antenna
2E FLight mode
3Camera Gimbal
4C
5Joystick
65.5” Screen
7MIC port
8Return to launch
9Power
10 Payload Release
11 Joystick 2
12 D
13 H
14 F
15 Speaker
16 Sim or Slot not activated
17 Charging Port
18 PPM Output
• Unscrew the 2 screws on the battery door at the back of the Gannet
Drone
• Insert Battery ( The main black and Red Power cables ) to the bottom of
the drone
• Plug in the battery and screw the battery door shut ( making sure it is
sealed )
• Insert the 3 landing gear ( 2 underneath the 2 rear motors and 1 posi-
tioned in front of the payload release)
• Turn on the controller
• Turn on the drone ( Light with ash a light green colour)
• Open up Skydroid app on homescreen ( on the controller)
• Push the connect button to connect controller to drone
• Compass Calibrate drone.
• Restart the drone after calibration
• Connect propellers
• Wait for indicator light on drone to turn a darker green
• Time to start ying

CALIBRATION & STARTER USER MANUALGANNET 2+ / MAX +
76
• Follow rotations on controller
screen
• Until download bar is
complete
• Press the arm Button on the controller screen
• Slide the bar to the right to
engage the propellers

GANNET 2+ / MAX +
8
Please Contact Dronetech NZ
Email: [email protected]
Phone: [phone]
www.dronetech.co.nz