DSPPA MAG6284 User manual

[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
MAG6284
Visual Networked Paging Controller
MAG6284 visual network paging controller is a network high-fidelity call station with camera video intercom
function based on TCP/IP transmission protocol, which can be hooked up to any place that the network can
reach. And can realize the paging control of 1000 partitions, with the characteristics of high stability of
traditional paging stations, stable and reliable operation, and low failure rate. The signal is fully digital
transmitted, with intelligent control as the core. The 10-inch color LCD display/please click screen is
equipped, and the graphic user interface is more user-friendly. With auxiliary input and output channels,
local audio source expansion and power amplifier expansion can be realized. The built-in player
independently developed by our company enables local monitoring of host programs.
It boosts a complete interface and a DC15V power supply interface that comply with the IEEE 802.3af/at
standard of the Power over Ethernet (PoE) system. The two power supply methods can be switched
automatically.
It supports 100/10Mbps adaptive TCP/IP network transmission protocol;
With manual shortcut keys, it is convenient for quick paging when it is urgent.
It has one line input (expandable external program source, wireless microphone, etc.), one local line
output (offline output local power amplifier paging), one auxiliary line output (extended monitor
power).
It has built-in high-performance DSP sound processing circuit.
It adopts embedded real-time system platform and high-performance ARM processor.
Intelligent paging stations can page and talk to each other.
The paging microphone can directly open the visual intercom terminal for video intercom;
And it can play network host program library songs.
Description
Features

[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
With audio and video log recording function, real-time recording and screen recording of the content of
paging can be performed, and it can be played and consulted.
It has the function of automatically turning off the microphone, and the caller can set to delay the
paging time.
With smart screen saver function, a 10-inch high-definition capacitive touch screen is used, and the
color display screen saver delay time can be set.
The network transmission communication mode can be set.
It supports Android System;
It is with face recognition and fingerprint authentication functions;
It supports multiple input methods such as handwriting input, pinyin, five strokes, strokes, etc.;
It supports video terminal management, supports video intercom, video surveillance, multi-screen
display functions, and displays the video wall through the externally expanded display screen;
It supports H264, H265, MPEG4 and other video editing and decoding formats;
It supports user authority management function;
It has built-in 3W intercom speaker, built-in digital microphone display and goose-neck microphone.
Specification
Parameters
AUX OUT rated output voltage
1.0±0.2V
NET OUT rated output voltage
MIC input sensitivity (output 1V)
50±10mV
MIC distortion (1kHz/1V)
MIC≤0.3%
Effective frequency range of MIC gain limitation
100-16000Hz
MIC signal-to-noise ratio (30k low pass)
≥68dB
MIC dynamic range
≥20dB
MIC input sensitivity (output 1V)
300±50mV
AUX distortion (1kHz/1V)
AUX≤0.3%
AUX signal-to-noise ratio (30k low pass)
≥68dB
Effective frequency range of AUX gain limitation
50-18000Hz
AUX dynamic range
≥20dB
Effective frequency range of monitor (voice
80-16000Hz
Monitor signal-to-noise ratio (voice intercom)
≥65dB
Operating voltage range
DC+14V
Standby power consumption
7.3W
Power
DC15V/PoE (802.3af) power supply
Overall power consumption
9.5W
Outer packing size (L×W×H mm)
440×360×135
Machine dimension (L×W×H mm)
350×196×103
Gross weight
4kg
Net weight
2.5kg
Specifications

[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
Front Panel
Visible Remote Paging Se lector MAG6284
MIC
FULL A LARMING
TOUCH
CALL ALL
Visible Remote Paging Se lector MAG6284
MIC
FULL A LARMING
TOUCH
CALL ALL
8
7
6
5
9
10
11
12
13
1. Microphone Head
Do not knock or bump the microphone head when
using it.
2. Microphone Switch Indicator Ring
The indicator light:
As long as you turn on the microphone and start
paging, the light ring will turn on;
It turns on synchronously with the indicator light
of the microphone switch button when paging
the zone.
3. Microphone Pole
The microphone angle can be adjusted freely.
4. Microphone Plug
The 5-pin XLR plug corresponds to the 5 pins of the
socket on the microphone pole in one-to-one.manner
5. Toggle Key
Switch between handheld microphone/handset and
built-in microphone.
6. Microphone/handset Fixed Hanging
Hang the microphone/handset there when not in use.
7. Monitor Speaker Window
It is used to transmit other's voice during intercom.
8. LCD Color Screen
Display the working status and operation item
interface of the paging station; please click the screen
to perform option operations.
9. Microphone Socket
5-pin XLR socket:
Pin 1 is the red light of the tube microphone;
Pin 2 is the tube microphone head blue light;
Pin 3 is the voice signal input;
Pin 4 is the signal input ground terminal;
1
2
3
4
Front / Rear Panel

[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
Pin 5 provides power for the tube microphone
indicator light of the tube microphone;
10. All-around Alarm Button
When an emergency occurs, all partitions will be
automatically opened after pressing this button, and
an alarm signal will be sent to all partitions. When the
button is in the alarm state, the red light is on. At this
time, press the button again to end the alarm.
11. Fingerprint Collection window
Fingerprints collection. When fingerprint registration
is completed, fingerprint can be used to wake up the
device when it is in the state of stand-by or starting
up.
12. Microphone Switch Indicator
The indicator light is on when you press the "CALL
ALL" button to open all partitions. This indicator will
also light up when a terminal is paged.
13. Paging Button
All-around paging by one touch.
Rear Panel
DC/+15V LAN1 USB HDMI 电源 A B 5V
广州市迪士普音响科技有限公司
Guangzhou DSPPA Audio Co.,Ltd.
LAN2
请勿打开,以免触电
警 告
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
PoE
DC/+15V LAN1 USB HDMI 电源 A B 5V
广州市迪士普音响科技有限公司
Guangzhou DSPPA Audio Co.,Ltd.
LAN2
请勿打开,以免触电
警 告
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
PoE
1 2 35678 9 10
411
广州市迪士普音响科技有限公司
Guangzhou DSPPA Audio Co.,Ltd.
NET AUDIO AUX OUT LINE IN NET AUDIO AUX OUT LINE IN
DC/+15V LAN 1 USB H DMI
电源 A B 5V
N E T
A U D IO
A U X
O U T
LINE
R
LINE
L
广州市迪士普音响科技有限公司
Guangzhou DSP PA Audio Co.,Ltd.
LAN2
请勿打开,以免触电
警 告
RISK OF ELECTRIC SH OCK
DO NOT O PEN
CAUT ION
PoE
1 2 3 4 5 678 9 10 11
IC
12
13
1. Switch
Press down “one” to turn on the power, and pop up
"one” to turn off the power.
2. DC15V Power Supply Interface
This machine's DC power supply input interface. (Note:
This interface can be used for power supply when PoE
power supply is not used.)
3. PoE network interface
When used as a data and power transmission interface,
connect to a PoE switch with 48V, AT mode output, and
only connect to a common switch network port when
used as data transmission.
4. Network Interface
Connect the network switch.
5. SD card jack (Micro SD)
Insert a USB or connect a storage device such as a
mobile hard disk with MP3 programs to this interface
to provide a program source for the built-in MP3
player.
6. USB interface
Insert a USB or connect a storage device such as a
mobile hard disk with MP3 programs to this interface
to provide a program source for the built-in MP3
player.
7. HDMI Output Interface
An external display can be connected.
8. Data Exchange Interface
RS485 analog paging function interface is reserved for
expanding the visual network system.
9. Network Audio Output
10. Line Audio Output Interface
Connect the power amplifier device.
11. Line Audio Input Interface
Connect player equipment, such as a DVD player or
tuner, etc.
12. IC Card Socket
You can insert an IC card to register and log in.
13. Microphone/handset Connection Part