JLab GO TALK User manual
GO TALK USB
MICROPHONE
ASSEMBLY
SETUP
SETUP GO TALK WITH PC (WINDOWS 7, 8, or 10)
1. From the Start menu, select the Control Panel.
2. From the Control Panel, select the Sound icon.
3. Select the Recording tab and select “JLab GO Talk”.
4. Select the Playback tab and select “JLab GO Talk”.
SETUP GO TALK WITH MAC (macOS 10.10 or HIGHER)
1. Open System Preferences and select the Sound icon.
2. Select the Input tab and select “JLab GO Talk”.
3. Select Output tab and select “JLab GO Talk”.
4. From this screen, set the Output volume to desired level.
1 2
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
Enter your PC or Mac settings to make sure
connection is established.
Connect to your PC or Mac USB INPUT.
BASE
Place the microphone through 5/8” or 1/4” mount
and screw on adapter to lock.
SWITCH VOLUME/
GAIN CONTROL:
Press Hold
(Light indicator
will change)
MUTE ON/OFF:
Quick Press
21
5/8” & 1/4” ADAPTER
5/8”
1/4”
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
W
A
R
R
A
N
T
Y
S
U
P
P
O
R
T
T
E
A
M
#
T
E
A
M
J
L
A
B
Shop products |Product alerts |Burn-in your headphones
JLab Store + Burn-in Tool
CONTROLS
IN USE
JLAB.COM
TIPS /TROUBLESHOOTING
CARDIOID
Record front
OMNI
Record all surroundings
Correct
position
Incorrect
position
SWITCH VOLUME/
GAIN CONTROL:
Press Hold
(Light indicator
will change)
MUTE ON/OFF:
Quick Press
LIGHT INDICATOR
VOLUME/GAIN WHEEL
Maximum Setting:
Light Blinks 3x
Minimum Setting:
Light Blinks 1x
RECORDING SETTING
VOLUME GAIN MUTE
HEADPHONE
AUX
USB-C
POWER
INPUT
• The GO Talk works with almost any recording software installed on macOS, Windows, or Linux. Review in your software’s setting and
adjust accordingly.
• No additional drivers/software are needed for the GO Talk. Simply plug in and setup in device settings.
• GO Talk will not work through most tablets or mobile phones due to their power limitations. The output power source needs to produce
5v or greater to operate.
• GO Talk will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
• If you are connecting through a USB hub or 3rd party adapter, make sure the product has the correct power output support and
connection support.
• Using external speakers for playback can cause microphone reverberation and echo. It is recommended to use headphones/earbuds for
recording playback if this occurs.
Other JLab Microphone manuals
