DTV Solutions Homecast HT9200 User manual

Quick Setup Guide – Homecast HT9200 receiver
Step 1 – Connect your digital receiver
After unpacking your digital receiver, connect as shown in the diagram below.
Option 1: HDMI
This is the recommended set up.
Option 2: Composite

Option 3: Component

Step 2: Initial Installation
Once the Homecast HT9200 is connected, turn the power on. The receiver will take
about 30 seconds to start up. The initial installation screen will show the following
screen:
Select Language by pressing OK

Select TV Type
CRT (old-fashioned square TV)
Plasma
LCD
Select Connection Type

HDMI for HD
Press OK

Select Yes
Once you have done this it will automatically begin scanning for new channels:
Once scanning is complete you should be able to view all channels