Dunlop 2 Piece Table User manual

MODEL/MODELO: 1642131
INSTRUCCIONES DE ARMADO
ASSEMBLY INSTRUCTIONS
TM
ATTENTION
DO NOT RETURN
TO THE STORE
Contact
MD Sports
Customer Service
* For additional resources and Frequently
Ask Questions, please visit us at
themdsports.com
ATENCIÓN
Contacto
MD Sports
NO DEVOLVERLO
A LA TIENDA
Servicio al Cliente
* Por mayor información y Preguntas
Frecuentes, favor visitarnos en
themdsports.com

FREE FULL YEAR
EXTENDED WARRANTY!
Give Us Your Opinion and Receive A
Write&a&review!for!a!recently!purchased!
item!on!TheMDSports.com!and!receive!an!
extended!full!year!limited!warranty,!
valued!at!$150.00.!
See!TheMDSports.com&
for!additional!details.!

Español
English
GARANTÍA LIMITA DE 90 DIAS
LIMITED 90 DAYS WARRANTY
(Continúe en la siguiente página.) www.themdsports.com
1642131 1
(Continued on the next page.)
This product is covered by a limited warranty that is effective for
90 days from the date of purchase. If, during the limited
warranty period, a part is found to be defective or breaks, we
will offer replacement parts at no cost to you, the customer. The
only exceptions to the warranty include mainframes, table tops,
playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to
improper usage, alteration, misuse, abuse, accidental damage
or neglect.
This Limited Warranty gives you specific legal rights and you
may also have other rights which vary from one State
(province) to another.
A PURCHASE RECEIPT (or other proof of purchase) will be
required before any warranty service is initiated. For all
requests for warranty service, please feel free to contact our
Consumer Service Department at :
WEBSITE: www.themdsports.com
Please be aware of your product’s Limited Warranty for the
return/refund policy from the store, We, at Medal Sports, can
not handle the product which is out of product’s limited warranty
since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING
THE PRODUCT TO THE STORE.
Este producto está cubierto por una garantía efectiva de 90 días a
partir de la fecha de su compra. Durante el periódo límite de la
garantía, si una parte defectuosa o quebrada es encontrada, nosotros
ofreceremos una reparación o un reemplazo de la partes sin ningún
costo para ud, nuestro cliente. Las únicas excepciones de la garantía
incluyen unidad principals, tableros de mesa, superficies, pilas o
herramientas.
La susodicha garantía no se aplicará en los casos de daños y
perjuicios debido al uso impropio, la alteración, el mal uso, el abuso,
el daño accidental o la negligencia.
Esta garantía limitada le da a usted derechos legales específicos,
usted también puede tener otros derechos que varían de un estado
(provincia) a otro.
EL RECIBO DE LA COMPRA (U otra prueba de compra) sería
requerida antes que cualquier servicio de garantía fuera iniciada.
Para todo pedido por servicio de garantía, por favor siéntase libre de
ponerse en contacto con nuestro Departamento de Servicio de
Consumidor en:
WEBSITE: www.themdsports.com
Por favor tenga atención sobre el Límite de Garantía de su producto de
la política de vuelta/reembolsa desde la tienda, Nosotros, Medal
Sports, no podemos manejar el producto que está fuera del límite de
garantía ya que proporcionamos solamente partes disponibles.
¡Gracias!
POR FAVOR PÓNGASE EN CONTACTO CON NOSOTROS ANTES
DE DEVOLVER EL PRODUCTO A LA TIENDA.
1 - Please leave your name, address, phone number, model number,
parts needed on the answering machine if there is no attendant.
Failure to do so will result in a delay in shipping parts to you.
2 - Please review the replacement parts list and make sure that
you have all of your parts before beginning assembly.
For questions that may arise or for missing/damaged parts,
please contact us.
3 - Since you build all tables upside down, please inspect tabletops
or playing surfaces right away before putting together, all
damaged table tops/playing surfaces need to be returned to
the store. Please contact with retailer for their return policy.
1 - Por favor deje su nombre, dirección, número telefónico, número
de modelo, partes necesarios a la máquina contestadora si no
fuera atendido. El fracaso de hacer así le causará un retraso del
envío de partes.
2 - Por favor revise la lista de piezas de repuesto y asegúrese de que
tiene todas las piezas antes de comenzar el montaje.
Para preguntas o para piezas que no se hayan incluidos/dañadas,
por favor pongase en contacto con nosotros.
3 - Ya que usted construye todas las mesas al revés, por favor
inspeccione las partes superiores de mesa o superficies de
juego enseguida antes de poner juntos, que todo tableros
de mesa/superficies dañado tiene que ser devuelto a la tienda.
Por favor comunique con el minorista por su política de
devolución.
¡AVISO!NOTICE!
STAPLE YOUR RECEIPT HERE /
GRAPA SU RECIBO AQU

(Continúe en la siguiente página.) www.themdsports.com
1642131 2
(Continued on the next page.)
Español
English
CAUTION !
ASSEMBLY TIPS
TOOLS REQUIRED
Phillips Screwdriver - Not Included
Standard (Flat Head Screwdriver) - Not Included
Wrench - Included
Allen Key - Included
Electric Screwdrivers may be helpful
during assembly; however, please set
a low torque and use extreme caution.
1 - This product is intended for INDOOR use only.
2 - Please do not sit, climb or lean on the product.
3 - Please do not drag the product when moving it in order to avoid
damaging the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces
of the product.
5 - This is not a child's toy, adult supervision is required for children
playing this game.
IMPORTANT NOTICE!
Power Tools
-Set Low Torque
High Torque
over tightened
1 - Please read the instructions carefully, and follow all assembly,
operation and safety instructions properly in order to avoid damage
or injury. For the assembly, at least three adults are required.
2 - Some figures or drawings may not look exactly like your product.
Please read and understand the text before beginning each
assembly step.
Destornillador Phillips - No Incluido
Destornillador de Cabeza Plana - No Incluido
Llave Inglesa - Incluido
Llave Allen - Incluido
Los destornilladores eléctricos pueden ser
de gran ayuda durante el ensamblado; sin
embargo, por favor ajuste el par de giro
bajo y sea extremadamente precavido.
Herramientas Necesarias
CONSEJOS PARAEL ENSAMBLADO
1 - Este producto está destinado para el uso INTERIOR solamente.
2 - Por favor no sientes, subas o inclínes la producto.
3 - Por favor no arrastres el producto cuando está moviendo para
evitar el daño sobre las piernas.
4 - Por favor use solamente pulimento de rociar para muebles para
limpiar la superficie exterior del producto.
5 - Esto no es un juguete de niños, se requieren la supervisión adulta
para niños cuando está jugando este juego.
¡AVISO IMPORTANTE!
1 - Por favor lea las instrucciones con cuidado y siga todo durante el
montaje, la operación y instrucciones de seguridad correctamente
para evitar el daño o la herida. Para el montaje, por lo menos se
requieren tres adultos.
2 - Algunas figuras o dibujos podrían parecer no estén exactamente
como su producto. Por favor lea y entienda el texto antes de iniciar
cada paso del montaje.
WARNING:
WARNING: Adult Assembly Required.
PELIGRO DE ASFIXIO - - Este artículo contiene piezas
pequeñas y / o pequeñas bolas. No apto para menores de 3 años.
ADVERTENCIA:
Las tareas de montaje debe realizarlas un adulto.
ADVERTENCIA:
¡
PRECAUCI N!
Adultos fuertes
necesarios No tener niños en el
area de ensamble
Mantener alejados a los
animales domesticos
del area de ensamble
No usar o guardar el producto en el
exterior. Solo para uso en interior.
No utilizar ni guardar el producto en
lugares humedos o mojados
Strong Adults Needed No Children in
Assembly Area
Keep away from pets Do not use or keep product
outdoors. For indoor use only.
No wet/humid conditions.
X3

Español
English
www.themdsports.com
1642131 3(Continúe en la siguiente página.)
(Continued on the next page.)
910 11 12
13 14 15 16
“T” Washer
2 3 4
Table Surface - 1 Table Surface - 2 Leg Caster Frame
Linkage Tube
Side Panel End Panel
1
x1 x1 x4 x2
6 7 85
x4
x4 x2
x2
18 19 20
Gravity Lock
x2
Net
x1
Safety Strap -
Long
x1
x4
17
1642131 PARTS LIST / LISTA DE PARTES
Superficie de
Mesa-1
Superficie de
Mesa-2 Pierna Marco de
Ruedecita
Leg Support
x4
Soporte de
Pierna
x2
Tubo de
Conexión
Panel
Lateral
Panel
Final
Arandela “T” Cerradura de
Gravedad
Red
Correa de
Seguridad - Larga
21
Safety Strap -
Short
x2
Correa de
Seguridad - Corta
Plastic Corner
x4
Rincón
Plástico
Logo Panel - B
x2
23
Logo Panel - A Panel de Logo - A Panel de Logo - B
x2
22
x4
Cover Cubierta
Handle Manija
Bushing Cojinete
x4
Small Bracket
x4
Corchete
Pequeño
Big Bracket
Corchete
Grande
Caster with Lock
x4
Ruedecita con
Cerradura
x2
Net Post Poste de Red

Español
English
www.themdsports.com
1642131 4(Continúe en la siguiente página.)
(Continued on the next page.)
INSTRUCCIONES DE ENSAMBLAJE
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your
Table Tennis Table Game. We recommend that three
adults work together to assemble this table tennis table
game.
2. Remove all the parts from the box and verify that you
have all of the listed parts as shown on the Parts list
pages. Carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work
surface.
1. Encuentre un lugar limpio, plano para comenzar el
montaje de su Mesa de Tenis de Mesa. Recomendamos
tres adultos trabajen juntos para montar este juego de
tenis de mesa.
2. Quite todas las partes de la caja y verifique que están
todas las partes catalogadas como mostrado en la
página de lista de partes. Con cuidado de cortar o
rasgar los cuatro rincones de caja de modo que el fondo
de la caja podría ser usado como su superficie de
trabajo.
1642131 PARTS LIST / LISTA DE PARTES
A4
M6x50mm Bolt
x14
Cerrojo
M6x50mm
x4
M8x80mm Bolt
A8
Cerrojo
M8x80mm
A9
M6x70mm Bolt
x4
Cerrojo
M6x70mm
A10
M5mm
Allen Key
x1
Llave Allen
M5mm
A11
x1
M6 - M8mm
Wrench
Llave Inglesa
M6 - M8mm
A12
A13 A14
M4 x 12mm Screw
x53
Tornillo
M4x12mm
A15
M4 x 30mm Screw
x6
Tornillo
M4x30mm
A16
M4mm
Allen Key
x1
Llave Allen
M4mm
x26
M6mm Nut Tuerca M6mm
M6x45mm Bolt
x8
A3
Cerrojo
M6x45mm
A2
A1
x4
M8mm Nut Tuerca M8mm
A5
6mm Washer
x52
Arandela
6mm
A6 A7
8mm Washer
x8
Arandela
8mm
M5x12mm Screw
x32
Tornillo
M5x12mm
Spacer
x4
Espaciador
Wrench
x1
Llave Inglesa
Linkage Tube
Cap
P1
x4
1642131 PRE-INSTALLED PARTS / PIEZAS PREINSTALADAS
Gorra del Tubo
de Conexión Pole Holder Soporte de Tubo Inner Leg Cap Gorra de Pierna
Interior
P2 P3
x4
x4
P4
Leg Leveler Nivelador
de Pierna
x4

www.themdsports.com
1642131 5(Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG. 1
FIG.1
3. Place Table Surface - 1 (#1) and Table Surface - 2 (#2)
with the painted surface facing down on a flat surface.
4. Attach Safety Strap - Long (#18) and 2 Safety Straps -
Short (#19) to the Table Surface (#1 & #2) using three
Screws (#A1). See FIG. 1A.
5. Attach the Small Brackets (#6) near the center sides of
table surfaces and Big Brackets (#12) near the player
sides of table surfaces using four Screws (#A2) per
Bracket. See FIG. 1 and 1B.
6. Attach the Handles (#5) to the surfaces using four
Screws (#A1) per Handle. See FIG. 1C.
FIG.1
3. Coloque la Superficie de Mesa - 1 (#1) y la Superficie de
Mesa - 2 (#2) con la superficie pintada cara hacia abajo
sobre una superficie plana.
4. Adjunte la Correa de Seguridad - Larga (#18) y 2 Correas
de Seguridad - Corta (#19) a la Superficie de Mesa
(#1 & #2) usando 3 Tornillos (#A1). Vea la FIG. 1A.
5. Adjunte el Corchete Pequeño (#6) cerca del centro de la
superficie de mesa y el Corchete Grande (#12) cerca del
centro de la mesa usando 4 Tornillos (#A2) por Corchete.
Vea la FIG. 1 y 1B.
6. Adjunte la Manijas (#5) a la superficie usando 4 Tornillos
(A1) por Manija. Vea la FIG. 1C.
1
2X 1
X 1
6X 4
X 32
X 11
A2
A1
X 4
12
X 1
X 2
18
19
X 2
5
Player
/ Jugador
19
A1 6
Player
/ Jugador
Center
/ Centro
1
2
12
12
12
12
6
6
6
A2
18
A1 A1
19
19
A1
18
FIG. 1A
FIG. 1B
A1
5
FIG. 1C
5
A1
5

www.themdsports.com
1642131 6(Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG.2
7. Attach the Legs (#3) to the Table Surface (#1) using one
Bolt (#A4), two Washers (#A7) and one Nut (#A9) per
Leg. See FIG. 2A.
8. Repeat the above steps for the other table half.
FIG.2
7. Adjunte la Pierna (#3) a la Superficie de Mesa (#1)
usando 1 Cerrojo (#A4), 2 Arandelas (#A7) y
1 Tuerca (#A9) por Pierna. Vea la FIG. 2A.
8. Repita dichos pasos para la otra mitad de mesa.
FIG. 2
3
X 4
X 8
X 4
A7
A9
X 1
A16
X 1
A14
X 4
A4
X 4
P2
Center
/ Centro
1
Player
/ Jugador
3
P2
A7
A7
3
A9
A14
A16
A4
FIG. 2A

www.themdsports.com
1642131 7(Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG.3
9. Place the Plastic Corners (#15) flush with the table
corners and attach using three Screws (#A1) per
Corner. See FIG. 3A.
10. Place the End Panels (#10) between the corners and
flush with the table edges at the Player ends of the
table and attach using five Screws (#A1) per End
Panel. See FIG. 3.
11. Place the Side Panels (#9) flush with the table edges
at the sides of the table and attach using five Screws
(#A1) per Side Panel. See FIG. 3.
12. Repeat above steps for other Table Surface.
NOTE: Make sure all Aprons are inside the Plastic
Corners.
FIG.3
9. Colocar la cisterna del rincón plástico (#15) con el
rincón de mesa y colocarla a través de 3 tornillos (#A1)
por rincón. Vea la FIG. 3A.
10. Colocar el panel final (#10) entre los rincones y la
cisterna con el filo de mesa al jugador final de mesa
usando 5 tornillos (#A1) por panel final.Vea la FIG. 3.
11. Colocar la cisterna del panel lateral (#9) con el filo de
mesa del lado de la mesa usando 5 tornillos (#A1)
por panel lateral. Vea la FIG. 3.
12. Repita dichos pasos para la otra Superficie de Mesa.
NOTA: Asegúrese que todos los Delantales están
dentro de los Rincones Plástico.
FIG. 3
X 42
A1
15 X 4
9X 4
10 X 2
Center
/ Centro
9
A1
9
Player
/ Jugador
1
FIG. 3A
15
A1
A1
10

www.themdsports.com
1642131 8(Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
A4
A16
A16
A14
A14
X 2
4
11
A4 X 2
A9
A7 X 20
X 10
FIG.4
13. Attach the Leg Supports (#11) to the Caster Frames
(#4) using four Bolts (#A3), eight Washers (#A7) and
four Nuts (#A9) per Leg Support. See FIG. 4A.
14. Attach the Gravity Locks (#14) to the Caster Frames
(#4) using one Bolt (#A4), two Washers (#A7), one
“T” Washer (#13) and one Nut (#A9) per Gravity Lock.
See FIG. 4B.
FIG.4
13. Adjunte el Soporte de Pierna (#11) al Marco de
Ruedecita (#4) usando 4 Cerrojos (#A3), 8 Arandelas
(#A7) y 4 Tuercas (#A9) por Soporte de Pierna.
Vea la FIG. 4A.
14. Adjunte el Cerradura de Gravedad (#14) al Marco de
Ruedecita (#4) usando 1 Cerrojo (#A4), 2 Arandelas
(#A7), 1 Arandela “T” (#13), y 1 Tuerca (#A9) por
Cerradura de Gravedad. Vea la FIG. 4B.
13
14
X 2
X 2
13
14
FIG. 4
11 X 2
4
4
4
11
A9
A9
A7
A7
A7 A7
A3
4
FIG. 4A
A3 X 8
FIG. 4B

A4 X 8
A9
A7 X 16
X 8
11
X 2
11
www.themdsports.com
1642131 9(Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG.5
15. Turn over the pre-assembled Caster Frame
(See FIG. 4), then attach it to the table surfaces using
two Bolts (#A4), four Washers (#A7) and two Nuts
(#A9) per Table Surface. See FIG. 5A.
Note: At least three adults are required to move
the table halves for safety.
16. Attach the Leg Supports (#11) to the legs (#3) using
two Bolts (#A4), four Washers (#A7) and two
Nuts (#A9) per Leg Support. See FIG. 5B.
FIG.5
15. Coloque la superficie de mesa al Marco de Ruedecita
(Vea la FIG. 4). Luego adjunte la superficie de mesa al
Marco de Ruedecita usando 2 Cerrojos (#A4), 4
Arandelas (#A7) y 2 Tuercas (#A9) por Superficie de
Mesa. Vea la FIG. 5A.
Nota: Por seguridad, se rquiere por lo menos 3
adultos para voltear la mitad de mesa.
16. Adjunte el Soporte de Pierna (#11) a la Piernas (#3)
usando 2 Cerrojos (#A4), 4 Arandelas (#A7) y 2
Tuercas (#A9) por Soporte de Pierna. Vea la FIG. 5B.
FIG. 5
Note:
Nota:
Por favor deje un espacio
aproximadamente de 10mm
entre los centros de mesa.
Please leave approximately 10mm
distance between table centers.
A4
A9
A7
A7
A14
A16
FIG. 5B
3
3
A4
A9 A7
A7
A14
A16
FIG. 5A

www.themdsports.com
1642131 10 (Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG.6
17. Insert the Linkage Tube (#7) to the Bushing (#21).
See FIG. 6A.
18. Connect them as shown in FIG. 6B.
19. Repeat the steps for another table half.
FIG.6
17. Inserte los Tubo de Conexión (#7) a los Cojinete (#21).
Vea la FIG. 6A.
18. Conecte los unen como mostrado en la FIG. 6B.
19. Repita dichos pasos para la otra mitad de mesa.
FIG. 6
23
X 4
X 2
X 2
22
7
X 4
X 4
A6
X 1
A15
X 8
A8
A10
21 X 4
A16
A10
4
11 22
23
4
A8
A6
A8
21
7
FIG. 6A
7
A15
FIG. 6B

www.themdsports.com
1642131 11 (Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG.7
20. Attach the Logo Panels - A (#22) to the Logo Panels - B
(#23) using six Screws (#A11). See FIG. 7.
21. Attach the Linkage Tubes (#7) to the Legs (#3) using
one Bolt (#A5), two Washers (#A7), one Spacer
(#A12) and one Nut (#A9) per Linkage Tube.
See FIG. 7A.
22. Attach the Casters with Locks (#16) to the Caster
Frame (#4) using the Wrench (#A13). See FIG. 7B.
FIG.7
20. Adjunte el Panel de Logo - A (#22) a la Panel de Logo - B
(#23) usando 6 Tornillos (#A11). Vea la FIG. 7.
21. Adjunte el Tubo de Conexión (#7) a la Pierna (#3) usando
1 Cerrojo (#A5), 2 Arandelas (#A7), 1 Espaciador (#A12),
y 1 Tuerca (#A9) por Tubo de Conexión. Vea la FIG. 7A.
22. Adjunte la Ruedecita con la Cerradura (#16) al Marco
de Ruedecita (#4) usando el Llave Inglesa (#A13).
Vea la FIG. 7B.
16
X 4
X 4
20
A5
A7
A9
X 4
X 8
X 4
X 6
A11
X 4
A12
FIG. 7
P1 X 4
23
A5
A7
A7
A12
A14
A9
FIG. 7B
A13
16
3
3
FIG. 7A
A16
7
11
X 1
A13
P1
22
20
A11

www.themdsports.com
1642131 12 (Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG. 8
Warning / Advertencia
FIG. 8B
Turn table on its side
/ Voltee la mesa sobre su lado.
FIG. 8A
At least three adults
/ Por lo menos 3 adultos
FIG. 8C
Fold table tops in
/ Doble las partes superiores de la mesa
FIG. 8D
Lock Wheels
/ Cierre las ruedas
20
21
FIG. 8E
DO NOT lean the table on
it's legs!
/ ¡NO dejar la mesa inclinada
a sus patas!
NOTE: Lift off of the floor and turn
in the air.
/ NOTA: Levantar el piso para darle
vuelta al aire.
FIG. 8F

www.themdsports.com
1642131 13 (Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG. 8G
CAUTION: Three strong adults are recommended to turn
the table over as shown.
PRECAUCION: Recomienda voltear la mesa por tres
adultos fuertes como mostrado.
B. FOLD LEGS AND
TABLE HALVES AND
LOCK IN PLACE
E. SET TABLE DOWN EVENLY
ON ALL WHEELS, TO PREVENT
BREAKING LEGS
E.DEJE LA MESA REGULARMENTE
SOBRE TODAS LAS
A.Voltee la mesa
a su lado
A. TURN TABLE
ON ITS SIDE
B.Doble las piernas y
mitad de la mesa y
cerrado en su posición
C. LIFT TABLE AND
TURN IN THE AIR
D. DO NOT LEAN
TABLE ON ITS LEGS!
C.Levante la mesa e
gire al aire D.Que no apoyes la
mesa sobre sus piernas
ABCDE
NOTE: Place on all 4 wheels at once
/ NOTA: Coloque las 4 ruedas al mismo tiempo.
FIG. 9
FIG.9
24. Para desdoblar la mesa-Solte primero la Cerradura de
Gravedad (#14) y las Correas de Seguridad (#18 & #19).
Vea la FIG. 9A y 9B.
FIG.9
24. To unfold the table - First release the Gravity Lock (#14)
and Safety Strap (#18 & #19). See FIG. 9A and 9B.
FIG.8
23. Siga las indicaciones en las Figuras 8A a 8G para
voltear la mesa con 3 adultos.
FIG.8
23. Please follow Figures 8A to 8G to turn the table over
with three adults.
FIG. 9A
FIG. 9B
20
21
14

www.themdsports.com
1642131 14 (Continúe en la siguiente página.)
(Continued on the next page.)
Español
English
FIG.11
26. Unfold the table halves, then attach the Net Post (#18)
at the middle of the table. Stretch the Net (#17) across
the center of the table and slip the net over the post on
the opposite side. See FIG. 11A.
FIG.11
26. Desdoble la mitad de mesa, luego adjunte el Poste de
Red (#18) a la mitad de mesa. Estire la Red (#17) a
través del centro de la mesa y resbale la red sobre el
poste del lado opuesto. Vea la FIG. 11A.
FIG.10
25. Then pull the handle and the table top, and slowly
lower the table to the floor. See FIG. 10.
FIG.10
25. Luego tire la manija y la mesa superior, y baje
lentamente la mesa al piso. Vea la FIG. 10.
Handle / Manija
FIG. 10
FIG. 11
8X 2
17 X 1
X 4
P4
X 4
P3
17
8
NOTE: Turn clockwise to lower
and anti-clockwise to raise.
/ NOTA: Dar vuelta en el sentido
del reloj para bajar y en el sentido
contrario del reloj para subir.
Lower
/ Bajar
Raise
/ Subir
P4
P3
3
FIG. 11A

FIG. 12
www.themdsports.com
1642131 15 (La ultima página)
(The last page)
Español
English
14
FIG. 12A
Gravity Lock
/ Cerradura de
Gravedad
FIG. 12C
Reverse / Inversa
21
Safety Straps
/ Correas de
Seguridad 18
19
NOTE: When the table is in its storage
position, always attach the safety strap
to prevent the sides from falling.
NOTA: Cuando la mesa esta en posicion de
almace-namiento, siempre usar la correa
de seguridad para prevenir que la mesa
se caiga.
YOU ARE NOW READY TO PLAY! ¡USTED ESTA AHORA LISTO PARA JUGAR!
FIG.12
27. Engrane con la Cerradurqa de Ruedas.
28. Doblando la mesa - Doble primero el lado de la mesa
sin el poste de red. Mantenga la manija firmemente y
levante la mesa. Asegúrese que la Cerradura de
Gravedad (#14) está cerrado. Adjunte juntos las
Correas de Seguridad (#18, #19) para impedir la caída
de los lados. Repita dichos pasos para el otro lado.
FIG.12
27. Engage the Wheels Lock.
28. Folding the table - First fold the side of the table
without the net post. Hold the handle securely and lift
the table. Make sure that the Gravity Locks (#14) are
locked. Attach the Safety Straps (#18, #19) together to
prevent the sides from falling. Repeat for the other
side.
FIG. 12D
FIG. 12B
Table of contents
Other Dunlop Robotics manuals