DUOTEC CO2 ALERT Mk X User manual

12 Inches
30 cm
CO2 ALERT Mk X
Quick Guide
Installation Height
CO2 is a heavy gas that accumulates in the
lowest areas filling an area from the floor and
up. Therefore it is our recommendation to mount
the CO2 sensor at 12 inches /30 centimetres
from the floor. This way the awareness of a leak
is made as early as possible insuring time to deal
with the leak as well as avoiding unnecessary
loss of CO2. This also harmonizes with existing
European legislation.
CO2 detection distance
The CO2 Alert must be mounted within a 5 meter/
15 feet radius of the CO2 distribution point.
15 Feet
5Meters 15 Feet 5Meters 15 Feet 5Meters

Lower floor/basement
In areas where the CO2 is stored or
distributed in Below Grade locations
such as Lower Floors and Basements,
it is essential to have Warning Lamps/
Horn Strobes before the entrance to
the area.
In enclosed spaces Warning Lamps/
Horn Strobes must be placed outside
of each entrance.
Enclosed Spaces
CO2 detection distance
It is very important to be aware that a
CO2 Sensor can only monitor the CO2
concentration in the proximity of the
sensor. Therefore it is essential to place
the sensor correctly within 5 metres /
15 feet from the distribution point were
a CO2 leak is possible.
15 Feet
5Meters

Since the CO2 Alert must be mounted within a 5 meters/ 15 feet radius of the CO2 distribution
point the CO2 Alert will cover most kiosk applications. OBSERVE! that the CO2 Alert must not
be covered by objects that block it from a clear view.
Kiosk installations
15 Feet
5Meters
12 Inches
30 cm

Remote Horn/Strobe
Connectors
Connectors
CO2 ALERT Mark 10
Remote Horn/Strobe
Connectors
Connectors
CO2 ALERT Mark 10
Remote Central Unit MK IX
1
2
3
Connectors
CO2 ALERT Mark 10 Power Supply
Installation with Remote Horn/Strobe schematics:
LogiCO2 International SARL. / LogiCO2 Online SARL. · B.P. 172 7502 Mersch · LUXEMBOURG
Telephone [phone] · Fax [phone] · [email protected]
V2014:1 © 2014 LogiCO2 International SARL / LogiCO2 Online SARL.
Advanced Installation Schematics:
Stand Alone Schematics: