Duplex Jeti DS-12 User manual

computer radio control system EN
DS-12
2.4GHz & 900MHz NG
Dual Band System
ENFW 5.00
CZECH REPUBLIC

computer radio control system EN

computer radio control system EN
1. Introduction ........................................................................................... 09
1.1 DS-12 ................................................................................................ 09
1.2 Activation method for software modules of JETI model ......... 09
1.3 Features ............................................................................................. 11
1.4 Manual Navigation ........................................................................ 12
1.5 Technical Support ............................................................... 12
1.6 DS-12 Package Contents ............................................................... 13
2. System Specifications .......................................................................... 13
3. Help mode ................................................................................................ 14
4. Description of Transmitter DS-12 .................................................... 15
4.1 Control Identification ................................................................... 15
4.2 Assembly Identification ................................................................ 16
4.3 Control Stick Assembly .................................................................. 17
4.3.1 Control Stick Length Adjustment ...................................... 17
4.3.2 Control Stick Angle Adjustment ........................................ 17
4.3.3 Control Stick Tension Adjustment ..................................... 17
4.3.4 Ratchet Tension Adjustment .............................................. 18
4.3.5 Throttle stick travel adjustment ....................................... 19
4.3.6 Changing the transmitter mode ........................................ 19
4.4 Swappable and Assignable Switches ........................................ 21
4.4.1 Switch Removal Procedure ................................................. 21
4.4.2 Assembly Procedure ............................................................. 22
4.5 Digital Trims .................................................................................... 23
4.6 Transmitter Battery Pack ............................................................... 23
4.6.1 Charging ............................................................................... 23
4.6.2 Battery Replacement ........................................................... 24
4.7 PPM Output Connector ................................................................ 24
4.8 Handling .......................................................................................... 25
4.9 Change SD Card .............................................................................. 25
5. RF Transmitter Modules ..................................................................... 26
ver. 1.0 - 2019-05, FW ver. 5.00
3

computer radio control system EN
6. Transmitter Powering ON/OFF .......................................................... 28
6.1 Transmitter, Powering-ON ........................................................... 28
6.2 Transmitter Turning-OFF ............................................................... 28
6.3 Transmitter Restart ...................................................................... 28
7. Initial switching-on ............................................................................... 29
7.1 Main display ..................................................................................... 29
7.2 Navigation in the Menu ................................................................. 30
7.2.1 Navigation ............................................................................. 30
7.2.2 Browsing through the Menu ................................................ 31
7.2.3 Basic Menu Structure ........................................................ 31
7.3 Model Set-up Guide ....................................................................... 32
7.3.1 Airplane .................................................................................. 32
7.3.2 Helicopter ................................................................................ 34
7.3.3 Multicopter ............................................................................. 36
7.3.4 General .................................................................................... 38
7.3.5 Set up of Receiver Outputs .................................................. 41
8. Duplex Receivers .................................................................................... 42
8.1 Description ....................................................................................... 42
8.2 Installation ....................................................................................... 42
8.3 Binding .............................................................................................. 42
8.3.1 Standard pairing procedure .............................................. 42
8.3. 2 Al ternative pairing pro cedure through the
transmitter menu ............................................ 43
8.4 Range test ......................................................................................... 43
8.5 Fail safe .............................................................................................. 43
8.6 Using Device Explorer To Configure the Receiver ...................... 45
8.6.1 Support of remote commands for EX Bus devices ........... 48
8.7 RC-Switch ........................................................................................ 50
The following chapters are only included in the electronic version of the
manual. The complete manual is available on the SD card of your
transmitter or on site www.jetimodel.com.
9. Main menu ............................................................................................... 52
9.0.1 Passwo r d p r o tec t ion a g ainst acc i d e n t a l
configuration changes .................................................................. 53
9.1 Model ................................................................................................. 54
4

computer radio control system EN
9.1.1 Model Selection ..................................................................... 54
9.1.2 New Model .............................................................................. 55
9.1.3 Basic configuration- AIRPLANE ......................................... 56
9.1.4 Basic Configuration - HELICOPTER .................................... 57
9.1.5 Swash mix ............................................................................... 59
9.1.6 Basic Configuration – Multicopter ..................................... 59
9.1.7 Basic Configuration-GENERAL ........................................... 60
9.1.8 Model Image & Colors ...................................................... 60
9.1.9 Assignment of functions ...................................................... 60
9.1.10 Servo Servo Assignment ................................................... 62
9.1.11 Servo Setup ........................................................................... 63
9.1.12 Servo balancer ................................................................... 64
9.2 Fine Tuning ....................................................................................... 66
9.2.1 Flight Modes ......................................................................... 66
9.2.2 Digital trim .............................................................................. 69
9.2.3 Flight Mode Trims .................................................................. 71
9.2.4 Dual Rate/Exponential ........................................................ 72
9.2.5 Programmable Function Curves ....................................... 74
9.2.6 Aileron Differential ................................................................ 76
9.2.7 Ailevator Function ............................................................... 76
9.2.8 V-Tail Mix ................................................................................. 77
9.2.9 Delta/Elevon Mix ................................................................... 78
9.2.10 Butterfly Mix ......................................................................... 78
9.2.11 Free Mixes ............................................................................. 80
9.2.12 Governor/Gyro ..................................................................... 83
9.2.13 Throttle Limiter .................................................................... 84
9.2.14 Snap Roll .............................................................................. 84
9.3 Advanced Properties .................................................................... 85
9.3.1 Other Model Options .......................................................... 85
9.3.2 Sticks / Switches Setup ..................................................... 86
9.3.3 Wireless Modes/Trainer .................................................... 88
9.3.4 Logical Switches ................................................................. 93
9.3.5 Sounds on Event (Sound Assignments) .......................... 95
9.3.6 Sequencer ............................................................................. 96
9.3.7 Accelerometer ........................................................................ 97
9.3.8 Telemetry Controls .............................................................. 98
9.3.9 Sound of Proportional Controls ....................................... 99
5

computer radio control system EN
9.3.10 Voice Commands ........................................................... 100
9.4 Timers/Sensors .............................................................................. 103
9.4.1 Timer ...................................................................................... 103
9.4.2 Alarms ................................................................................... 105
9.4.3 Vario ....................................................................................... 107
9.4.4 Voice Output ........................................................................ 107
9.4.5 Sensors/Logging Setup .................................................... 109
9.4.6 Displayed Telemetry ........................................................... 110
9.4.7 Main Screen ......................................................................... 113
9.5 Applications ................................................................................... 114
9.5.1 Data Analyzer ...................................................................... 114
9.5.2 Audio Player ........................................................................ 115
9.5.3 JETIBOX ................................................................................. 116
9.5.4 Games ................................................................................... 116
9.5.5 Image Slideshow ................................................................. 116
9.5.6 Microphone .......................................................................... 116
9.5.7 User Applications ................................................................ 117
9.6 System ............................................................................................ 118
9.6.1 Configuration ..................................................................... 118
9.6.2 Servo & Range Test ............................................................. 121
9.6.3 View Inputs ........................................................................... 121
9.6.4 Receiver Output (Servo Monitor) .................................... 122
9.6.5 System sound ....................................................................... 123
9.6.6 Sound Volume ..................................................................... 123
9.6.7 Installed Modules ............................................................... 124
9.6.8 Limitations in copying models between transmitters . 124
9.6.9 USB ......................................................................................... 124
9.6.10 Info ....................................................................................... 125
9.7 Throttle Lock .................................................................................. 126
9.8 Select Input control ..................................................................... 126
9.9 Trim Menu ..................................................................................... 130
9.10 How Transmitter Output Functions are Processed .............. 130
10. Transmitter to PC Connection ....................................................... 131
10.1 Memory & System Files ............................................................. 131
10.2 Update Firmware ....................................................................... 131
6

computer radio control system EN
10.3 Sounds, Alarms & Acoustic Updates ....................................... 131
10.4 System Backup ............................................................................ 132
10.5 PC Joystick ..................................................................................... 132
10.6 Telemetry Data Logging ............................................................. 132
10.7 Copying models between the transmitters ............................. 132
11. Battery Safety Handling Rules ........................................................ 133
11.1 Transmitter Battery Pack .......................................................... 133
11.2 General Safety Rules ..................................................................... 133
11.3 Flight Safety Check ..................................................................... 134
11.4 Application ..................................................................................... 134
11.5 FCC /IC Information ....................................................................... 134
12. Model Menu – Airplane/Sailplane .............................................. 136
12.1 Butterfly Mix (Crow Mix) .............................................................. 136
12.2 Aileron Differential ....................................................................... 136
12.3 Ailevator ....................................................................................... 137
12.4 V-Tail Mix ..................................................................................... 137
12.5 Delta/Elevon Mix .......................................................................... 138
12.6 Spoilers to Elevator Mix ............................................................. 138
12.7 Ailerons to Rudder Mix ................................................................ 139
12.8 Rudder to Ailerons Mix ................................................................. 140
12.9 Butterfly (Crow) Mix ..................................................................... 141
12.10 Rudder to Elevator Mix ............................................................. 142
12.11 Aileron to Flap Mix ..................................................................... 143
12.12 Aileron to Flap Mix (Brake Variation) ................................... 144
12.13 Elevator to Flap Mix ................................................................... 144
12.14 Flaps Mix – Camber Control .................................................... 145
12.15 Throttle Cut (Kill Switch) ........................................................... 146
12.16 Throttle Idle ................................................................................. 146
7

computer radio control system EN
8

computer radio control system EN
The DS-12 transmitter was developed and produced with the
cooperation of professional engineers and world champion pilots.
The design goals were maximum utility, durability, and reliablity of
their mechanical parts along with simple handling. The
straightforward case shape makes servicing easy. The plastic, ball
bearing equipped, control gimbals with their magnetic Hall sensors
are another revolutionary design concept used to make the DS-12
among the world’s most advanced R/C systems.
Purposefully placed at the top of the transmitter, the 3.5" sunlight
readable color LCD with its wide viewing angle offers nearly perfect
visibility in just about any lighting condition. Thanks to its high
resolution display and use of a relatively large number of graphic
images it was possible to create a simple and intuitive setup
procedure for displaying telemetric data.
The DUPLEX EX family of products have been equipped with an
improved real-time telemetry system which can be viewed on the
LCD transmitter display. The transmitter allows the setup of voice
notifications, both preinstalled and user created, which can be
related to telemetric values, user set alarms, or signals which have
been assigned to conditions of various control elements.
The DS-12 offers concept of individual feature setup based upon the
requirements of each customer. The transmitter is available in a basic
configuration that will meet the needs of most users for most model
types. For individual setting of the transmitter there is a configurator
available at swshop.jetimodel.com. After the simple registration of
your transmitter it is possible to select additional features based
upon your individual demands.
1.1.
1.1 DS-12
1 Introduction
1. Make sure you have the most
current firmware version in your
transmitter.
2 . R e g i s t e r o n t h e s i t e
swshop.jetimodel.com.
3. After clicking on the „Register
new product“ button you will be
redirected to a form where you
enter a product type (DS-14),
followed by the „serial number”
(SN: xxxxxxxxx) (to be found on
the back of the transmitter behind
the screen) and then enter the „16
digit registration code” (xxxx-
xxxx-xxxx-xxxx) (see the menu
„System -> Installed Modules”
highlighted by the frame). After
registering your transmitter, you
can select individual function
modules that you want to
activate.
4. Mark selected modules and
proceed to checkout.
5. Then you will be asked to pay
9
1.2 Activation method for software modules of JETI model

computer radio control system EN
the relevant amount. After payment, a unique nontransferable file
named “Activation.bin” will be generated. It will then be sent to
your e-mail.
6. Connect the DS-14 to your computer and enable USB mode.
7. Copy the “Activation.bin” file to the transmitter SD card into the
root folder. The contents of the transmitter SD card can then look like
this:
8. Disconnect the transmitter from the computer (Do not forget to
confirm the safe hardware removal). Then confirm in your
transmitter that you want to update and restart it.
If the activation is successful, an informative table with a list of
modules appears immediately after switching on. Then it is
possible to operate the transmitter as usual.
10

computer radio control system EN
1.1.
integrated cover in the DS-12 case for protection against mechanical
damage.
Large Memory – Internal SD card for storing models, sounds, and
telemetry data.
USB Connector – convenient connection to your PC. Fast firmware &
sound upgrades, telemetry data downloads.
Fast Navigation – 3D wheel-style interface combined with function
keys allow for speedy navigation within the DS-12 menu.
Digital Trims – fully programmable trims and a revolutionary
automatic trimming function.
Swappable and Assignable Switches – all of the switches on the DS-
12 transmitters (2 or 3-position) can be easily moved and assigned to
create a custom configuration that works best for your application.
Programming – the logical and intuitive transmitter firmware is
designed to be simple to use. Just follow the step-by-step screens.
The creation of a new model can be accomplished with just a few
easy steps.
Sounds/Alarms – the DS -12 transmitters are equipped with audible
alarms and also allows the use of user-recordable alarms and sounds
to keep you fully informed while also keeping distractions to a
minimum.
Integrated microphone with voice recognition capability - using
the integrated microphone you can easily prepare your own audio
files. Furthermore, you can teach the transmitter to respond to
several voice commands.
Duplex 2.4GHz – the DS-12 transmitters feature the Duplex 2.4GHz,
frequency hopping, digital, data stream system, originally
developed by JETI model in the Czech Republic. This system has
been reliably used for many years.
Duplex 900MHz NG (Next Generation) - the DS-12 transmitters
feature a backup wireless system for unmatched data transmission
safety and reliability.
Built-in Telemetry – from the start, the DS-12 transmitters were
designed and built with many attractive features and include the full
integration of all Duplex telemetry sensors.
Transmitters - the DS-12 designs use premium quality materials and
emphasize state-of-the-art appearance and user comfort.
Precise Gimbals – the transmitter gimbals are equipped with Hall
sensors and ball bearings for precision movement with an almost
unlimited lifespan.
Haptic feedback - the transmitter are equipped with shaking
vibration motor that can be used for alarm notifications, timers etc.
LCD Display – color 3.5" TFT LCD display with 320 x 240 resolution
which is highly visable under any light conditions.
Li-Ion Battery – provides a proven and reliable energy source with a
high capacity (6200mAh) and a long service life.
Easy Charging – simply connect the wall power supply, optional car
charger, or any 12V DC power supply to the transmitters charge port.
The DS-12 may also be charged through the USB to PC interface. The
charging progress is shown on the DS-12 display.
Integrated Antenna – the antennas are located behind fully
1.3 Features
11

computer radio control system EN
1.4 Manual Navigation
To make navigation faster, the DS-12 transmitter Instruction Manual
has been divided into 5 basic groups:
1. Introduction and product support.
2. Basic description and mechanical adjustments.
3. First time switch-on. Basic helicopter and airplane set up.
4. Advanced programming. Detailed descriptions.
5. PC upgrade/upload, safety information, and special mixes.
Important parts of the instructions are separated from the text
andhighlighted according to importance.
Advice Note Warning
Advanced modelers may want to begin with group 3 where you will
get all of the basic information for model setup. This is the quickest
way to understand the basic ideas of the DS-12 transmitter
programming and with this basic information you can begin to
create your own model. More advanced programming functions are
found in group 4. This is where you can find detailed descriptions of
all of the DS-12 functions. The last section provides detailed
description of firmware upgrades, downloads, and special mixes.
1.1.
If you feel uncertain about how to set up particular transmitter
functions, do not hesitate to take advantage of our technical support:
1. Web Site
Either the JETI model (manufacturer) or your local distributor’s web sites
offer a wide range of support for the DS-12 transmitters. You will find
advice, tips or frequently asked questions (FAQ) which, in most cases,
contain the answers to your questions.
2. Distributor, Manufacturer
You may also find support at your local hobby shop, distributor, or
directly with the manufacturer JETI model s.r.o.
3. Service and Warranty Coverage
JETI model CZ exclusively warranties that the products purchased will
be free from defects in materials and workmanship for a period of 24
months from the date of purchase by the customer. This warranty
covers only those products purchased from an authorized JETI model
CZ distributor or dealer. Third party transactions are not covered by this
warranty. Proof of purchase is required for warranty claims. Repair or
replacement decisions are at the sole discretion of JETI model CZ or an
authorized service provider. This warranty does not cover cosmetic
damage or damage due to an accident, misuse, abuse, negligence,
commercial or research use, or modification of or to any part of the
product. This warranty does not cover damage due to improper
installation, operation, maintenance, or attempted repair by anyone
other than JETI model CZ or an authorized service provider.
JETI model CZ reserves the right to change or modify this warranty
without notice and disclaims all other warranties, expressed or
implied.
1.5 Technical Support
12

computer radio control system EN
1. 2.
2
4
5
3
1
Basic technical parameter
DS-12
RF module 900MHz
(863-870 MHz - EU)
(902-928 MHz - EU)
m
Stick material Multimode
Plastic
Resolution of sticks
4096
Sticks HALL sensors
l
Internal memory, SD cart
8 GB
RF modul 2.4 GHz
1
Number of antennas
3
LCD
3,5" 320x240px
color high contrast
Weight [kg]
0.7
Dimensions [mm]
194x215x55
Battery pack [mAh]
Power Ion
6200
m Extension l Contains
1.6 DS-12 Package Contents
1. 2. 3. 4. JETI DS-12 Transmitter, Wall Power Supply, USB PC Cable,
Installation Key Set , Cleaning Cloth, Instruction (HEX 1,5; TORX 10) 5.
Manuals,
2 System Specifications
13

computer radio control system EN
2.2.
3 Help mode
It is possible to call up the help mode for each item where a "question
mark" icon appears in the upper right corner of the screen . If you see (1)
this icon, you can press the "menu" button briefly to call up the help
mode for the current item you have highlighted in the respective
transmitter menu .(1)
This help mode is available in FW min. v5.00. We recommend update
your transmitter by Jeti Studio.
1
2
14

computer radio control system EN
2.2.
4 Description of Transmitter DS-12
1. Right Stick 1, 2 – the DS-12 Transmitter Supports Modes 1-4, see Control
Sticks -> mode change
2. Left Stick 3, 4 the DS-12 Transmitter Supports Modes 1-4, see Control
Sticks -> mode change
3. Swappable and Assignable Switches: Sa, Sb, Sc, Sd, Se, Sf
4. Digital Trims for the Left Stick T3, T4
5. Digital Trims for the Right Stick T1, T2
6. Right Rotary Control Knob 5
7. Left Rotary Control Knob 6
8. Rotary Control Knob 7
9. Rotary Control Knob 8
10. LCD Display
11. Function Buttons F1 – F5
12. Transmitter On/Off Power Switch
13. 3D Control Selector
14. Menu Button
15. ESC Button
16. Shows the 2.4GHz Antenna but NOT the handle.
Add the handle and assign it a number and pointer in the photo.
17. Charge Jack
18. USB PC Interface
19. PPM Input/Output
20. ON/OFF & Charging LED Indicators
21. Speaker
22. Neckstrap Hook
23. Earphone Jack
24. 900 MHz Antenna
25. Microphone
4.1 Control Identification DS-12
3
45
7
8
12 13
15 14
16
17
18
21
21
3
6
9
11
19
22
23
24
20
25
10
10
15

computer radio control system EN
2.2.
4.2 Assembly Identification
26. Battery Connector
27. Transmitter Battery Pack
28. PPM Output Connector
29. Left Gimbal Assembly
30. Right Gimbal Assembly
31. Micro SD Card
32. 2.4GHz Antennas
33. 900 MHz Antenna
27 26
28
29 30
33
31 32
16

computer radio control system EN
4.3 Control Stick Assembly
When handling with back cover removed always
switch off the transmitter and disconnect the
battery (unplug the connector). Also do not connect
the charging adapter or the USB cable.
Note:
Restrict your contact with the printed circuit
boards to a minimum. You can damage your
radio by electrostatic discharge!
Warning:
4.3.1 Control Stick Length Adjustment
The stick length is adjustable to suit your flying style. The stick end
separates into two parts.
1. Hold the top part of the
stick and firmly and unscrew (turn it
anticlockwise).
2.Turn the stick end clockwise to
shorten or counterclockwise to
lengthen the overall stick length.
3. Adjust the lower part to support
the top part of the stick end.
4. Finally secure by tightening both
parts to each other.
If you have installed optional sticks with switch or
button ends; make sure that while adjusting the stick
length you observe the wires that pass through the
stick shaft and through the gimbal opening in order
to prevent damaging the connecting cables. The
safest method is to remove the small set-screw from
the side of the stick housing to allow the switch or
knob internals to remain stationary while you rotate
the stick housing for height adjustment. (4.3.7)
Warning:
4.3.2 Control Stick Angle Adjustment
It isn't possible to adjust the angle of rotation of control stick in the
DS-12 transmitter.
2.2.
4.3.3 Control Stick Tension Adjustment
The stick gimbal tension is fully adjustable for each axis. This allows
you to fully customize your
radio‘s control feel. Simply
adjust each gimbal‘s spring to
your desired tension.
1. Switch off the transmitter
and remove the 7 screws
t h a t s e c u r e
the radio back cover. Next,
remove the radio back
cover.
Be sure to disconnect
the transmitter battery
pack connector.
1
2
3
4
17

computer radio control system EN
2.2.
3. Reconnect transmitter battery pack and reinstall radio back
cover and cover screws.
By turning the screw clockwise, you will tighten spring tension. As
a result the moving resistance of the control stick will increase.
2. Use indicated machine adjustment screws to change the
desired spring tension. By turning the screw countercloc
kwise, you will loosen spring tension. As a result the moving
resistance of the control stick will decrease.
2
2
1. Switch off the transmitter and remove the 7 screws that secure
the radio back cover. Next, remove the radio back cover. Be sure
to disconnect the transmitter battery pack connector.
2. For ratchet tension adjustment use the machine screw . “A”
Turn slowly (counter-clockwise) until you achieve the desired
ratchet tension. For smooth tension adjustment, use the
machine screw Turn slowly (clockwise) until you achieve “B”.
the desired smooth tension.
4.3.4 Ratchet Tension Adjustment
Whether you prefer smooth throttle feel or ratchet throttle feel, you
can adjust the DS-12 transmitter either way you like allowing you to
fully customize your radio‘s feel. Each tension is set by a different
machine screw.
A
B
3. Reconnect transmitter battery pack and reinstall radio back
cover and cover screws.
18

computer radio control system EN
2.2.
4.3.5 Throttle stick travel adjustment
The throttle stick travel is adjustable to suit your flying style.
1. Switch off the transmitter and remove the 8 screws that secure the
radio back cover. Next, remove the radio back cover. Be sure to
disconnect the transmitter battery pack connector.
2. Use indicated machine adjustment screws to limit the throttle
stick travel. By turning the screw clockwise, you will shorten the
throttle stick travel.
3. Reconnect transmitter battery pack and reinstall radio back cover
and cover screws.
After making a limit change to the throttle stick travel you must
recalibrate the transmitter stick in the software menu, see section
9.6.3 –Calibration of Proportional Controls.
2
4.3.6 Changing the transmitter mode
The transmitter is equiped with universal multimode gimbals. Both
gimbals are identical and can be adjusted mechanically for modes 1-
5. After mechanical adjustment it is necessary to set a specific
transmitter mode in the menu System – Configuration – Stick mode
1-4.
To change the quad sticks settings, unscrew the back cover of the
transmitter and disconnect the battery connector.
A. Setting the multi-mode gimbal into the mode without
locking the middle position - gas
B
A
C
2
1
3
E
5
5
D
1. A.Loosen the screw
2. C. Lift the lever B so as it is possible to arrest the lock
3. C Turn the lock 90° in the direction of the arrow and arrest the
lever in the upper position. B
4. A. Tighten the screw
5. D E Tightening the the screws and sets the desired tension with
steps and smooth brake.
19

computer radio control system EN
2.2.
1. A.Loosen the screw
2. B. Slightly lift the lever
3. C B Turn the lock in the direction of the arrow and arrest the lever
in the upper position.
4. C Move the lever in the direction of the arrow to release the lever
B.
5. A. Tighten the screw
6. Loosen the screws E and D in a position so that tension is removed
from the stick.
B. Setting the multi-mode gimbal into the mode with locking
the middle position - elevator
B
2
1
3
A
C
E
D
5
20