Dura-Max Insulated Cabin Manual

• Strong & Secure Cabin
• Quick & Easy Assembly
• Metal Cladded Insulated Walls
• Wide Door with Lock
• Easily Expandable
Call us for any missing or damaged parts.
Do not return to the store.
Requires two people and takes 4-5 hours for Installation.
Insulated Cabin
ALL PURPOSE INSULATED CABINS
• Modular Extension Kits Available
• Window Kits Available
Customer
Service Hotline
[phone]
www.uspolymersinc.com
OWNER’S MANUAL /
Instructions for Assembly
Size 10 Ft x 13 Ft / 3.1 Mtr. x 4.0 Mtr. (Approx.)
Ver. : 2.0
Available Kits
Building Dimensions :
Approximate
Size
Storage Exterior Dimension Interior Dimension
10 Ft x 13 Ft 129 Sq. Ft. 878 Cu.Ft.
Roof Edge to Edge
Base Dimension Door Opening
3.1 Mtr. x 4.0 Mtr. 12 Sq.Mtr. 24.9 Cu.Mtr.
Width
Depth
Height
inch cm.
159 1/4 404.5
inch cm.
120 1/4 305.4
161 409
125 1/4 318
90 228.6
inch cm.
157 1/8 399
inch cm.
118 1/8 300
37 1/4 95
82 3/4 210 81 3/4 208
Wall to Wall
Area Volume

Duramax Insulated Shed
Limited Seven Year Warranty
U.S. Polymer Inc. will send a replacement part free of charge, in the event of material defects and or
workmanship for a period of seven years from the date of purchase.
This warranty is extended only to the original purchaser. A purchase receipt or other proof of date of original
purchase will be required before warranty service is rendered. In no event shall we pay the cost of flooring,
labor, installation or any other costs related thereto.
This warranty only covers failures due to defects in material or workmanship which occurs during normal
use and does not extend to color change arising due to normal weathering or to damage resulting from
misuse or neglect, commercial use, failure to follow assembly instructions and the owner’s manual (including
proper anchoring of the shed), painting, forces of nature and other causes which is beyond our control.
Claims under this warranty must be made within the warranty period by calling 1-800-483-4674 or mail in
a dated sales slip and clear photograph of the part to:
U.S. Polymers, Inc.
1057 S. Vail Ave,
Montebello, CA 90640.
We reserve the right to discontinue or change components. If a component has been discontinued or is
not available,
U.S. Polymers, Inc. reserves the right to substitute a component of equal quality as may be compatible.
Limits and Exclusions
There are no express warranties except as listed above. The warrantor shall not be liable for incidental or
consequential damages resulting from the use of this product, or arising out of any breach of this warranty.
All express warranties are limited to the warranty period set forth above . Some states do not allow the
exclusion or limitation on how long an implied warranty lasts, so the above limitations may not apply to
you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to
state or country to country.

Parts List
Hand Gloves
Cordless Drill - Philips Head
Screw driver - Philips Head
Carpenter’s Square
Eye Protector
8’ Step Ladder
Adjustable pliers
ACCESSORIES
CODE DESCRIPTION QTY
DNS NO SPOUT BOX 1
DFA4 FEMALE ADAPTOR 1
P2BE P2 BEVEL END CAP 2
S1 DIA. 4.2 x 16mm SHEET METAL SCREW 288
S2 DIA. 4.2 x 32mm SHEET METAL SCREW 4
S3 M4x10mm MACHINE SCREW 2
S10 DIA. 6.2 x 60mm SELF DRILLING SCREW 42
S11 M4x35mm. HEX. BOLT & DOMED CAP NUT 52
S12 M6x15mm. HEX. BOLT & NUT 12
S13 M6x40mm. HEX. BOLT & NUT 12
S14 ANCHOR BOLT 8
S15 DIA. 4.2 x 16mm SELF DRILLING SCREW 24
S16 HEX. SCREW CAP 42
S17 M4x30mm. HEX. BOLT & DOMED CAP NUT 8
S18 M4x35mm. HEX. BOLT & NUT 8
S19 PLASTIC SCREW COVER 8
HC HINGES 3
SILICON CLEAR 2
DOOR LOCK WITH SCREWS 1
SUPER GLUE 1
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Tools You Will Need
Level - 3ft.
Tape Measure
Hammer or Rubber Mallet
Caulk Gun
10mm Hex. Socket Bit
7.0mm Spanner
PROFILES
BC1C, BC2C
BC3C, BC4C
TC3C, TC4C
DCLC, DCRC, DSC
RF1C, RF2C, RF3C
RF4C, RF5C, RF6C
GLC, GRC
GJC TS1C, TS2C
PC1C PC2C RSJC
S1, S2 S3 S10 S11, S17 S12 S13, S18
S14 S15 S16
WINDOW WINDOW FRAME
Note: Check all parts prior to installation.
CODE DESCRIPTION QTY
F1C FOUNDATION ‘U’ CHANNEL 2
F2C FOUNDATION ‘U’ CHANNEL 2
F3C FOUNDATION ‘U’ CHANNEL 4
F4C FOUNDATION ‘U’ CHANNEL 4
F5C FOUNDA TION ‘U’ CHANNEL 2
F6C FOUNDATION ‘U’ CHANNEL 2
F7C FOUNDATION ‘U’ CHANNEL 4
F8C FOUNDATION ‘U’ CHANNEL 18
F9C FOUNDATION ‘U’ CHANNEL 4
F10C FOUNDATION ‘U’ CHANNEL JOINT 8
F11C FOUNDATION ANCHOR 8
BC1C BASE ‘U’ CHANNEL FRONT LEFT / BACK RIGHT 2
BC2C BASE ‘U’ CHANNEL FRONT RIGHT / BACK LEFT 2
BC3C BASE ‘U’ CHANNEL SIDE 2
BC4C BASE ‘U’ CHANNEL SIDE 2
TC1C TOP ‘U’ CHANNEL FRONT LEFT 1
TC2C TOP ‘U’ CHANNEL FRONT RIGHT 1
TC3C TOP ‘U’ CHANNEL BACK LEFT 1
TC4C TOP ‘U’ CHANNEL BACK RIGHT 1
TC5C TOP ‘U’ CHANNEL RIGHT SIDE FRONT 1
TC6C TOP ‘U’ CHANNEL RIGHT SIDE BACK 1
TC7C TOP ‘U’ CHANNEL LEFT SIDE FRONT 1
TC8C TOP ‘U’ CHANNEL LEFT SIDE BACK 1
DCLC DOOR COLUMN LEFT 1
DCRC DOOR COLUMN RIGHT 1
DSC DOOR STOPPER TOP / BOTTOM 2
CC CORNER COVER 4
RSC ROOF PANEL SUPPORT 3
RF1C ROOF FLASHING FRONT LEFT 1
RF2C ROOF FLASHING FRONT RIGHT 1
RF3C ROOF FLASHING RIGHT SIDE FRONT 1
RF4C ROOF FLASHING RIGHT SIDE BACK 1
RF5C ROOF FLASHING LEFT SIDE FRONT 1
RF6C ROOF FLASHING LEFT SIDE BACK 1
RF7C ROOF FLASHING SUPPORT 9
GL GUTTER LEFT 1
GRC GUTTER RIGHT 1
GJC GUTTER JOINT 1
TS1C SIDE TOP CHANNEL SUPPORT FRONT 2
TS2C SIDE TOP CHANNEL SUPPORT BACK 2
PC1C PIPE BRACKET 1
PC2C PIPE CLAMP 1
GSC GUTTER SUPPORT 4
RSJC ROOF PANEL SUPPORT JOINT 6
TS3C FRONT TOP CHANNEL SUPPORT BLOCK 3
DCV4 DRAINAGE PIPE 1
W1C WALL PANEL 10
W2C WALL PANEL FRONT LEFT 1
W3C WALL PANEL FRONT RIGHT 1
CODE DESCRIPTION QTY
W4C WINDOW CUT WALL PANEL 1
R1C ROOF PANEL RIGHT 1
R2C ROOF PANEL CENTER 2
R3 ROOF PANEL LEFT 1
DOOR DOOR 1
WINDOW 1
WINDOW FRAME 1
F1C, F2C, F3C, F4C, F5C,
F6C, F7C, F8C, F9C
TC1C, TC2C,
TC5C, TC6C
TC7C, TC8C
RSC
RF7C
F11C
F10C
GSC
S19
TS3C DNS DFA4 P2BE
HC

Exploded View
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
F11C
BC1C
BC2C
BC2C
BC1C
BC3C
BC4C
BC4C
BC3C
F1C
F2C
F2C
F1C
F5C
F6C
F6C
F5C
F3C
F4C
F3C
F4C
F7C
F8C
F9C
F10C
W2C
W3C
W1C W1C
W1C
W1C
W1C
W1C
W1C
W1C
W1C
W1C
W1C
CC
CC
CC
CC
DSC
DCLC
DCRC
DOOR
DSC
TS3C
TS3C
TC1C
TC2C
TC3C
TC4C
TC5C
TC6C
TC7C
TC8C
RSC
RSC
RSC
TS1C
TS2C
TS1C
TS2C
RSJC
RSJC
RSJC
RSJC
RSJC
RSJC
RF1C
RF2C
RF3C
RF4C
RF5C
RF6C
GLC
GRC
RF7C
RF7C
RF7C
RF7C
RF7C
RF7C GSC
GSC
GJC
P2BE
P2BE
DNS
R1C
R2C
R2C
R3C
DCV4
PC1C
PC2C

Note: It is important that these instructions
are followed step by step.
1
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
A. Foundation & Base Assembly
Parts needed:
F1C 2
F2C 2
F3C 4
F4C 4
F5C 2
F6C 2
F7C 4
F8C 18
F9C 4
CODE QTY
F10C 8
F11C 8
BC1C 2
BC2C 2
BC3C 2
BC4C 2
S1 160
S14 8
CODE QTY
Step - 2
Step - 1
Make Two sets
Note
S1
F3C
F4C
Make Four sets
Note
F1C
F2C
S1
All parts are clearly marked and care should
be taken to use the correct one.
Note
Before Assembling Foundation make sure
that the floor level should be perfect flat.

2
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 3
Make Two sets
Note
F5C
F6C
S1
Step - 4
F1C
F2C
F2C
F1C
F6C
F5C
F5C
F6C
S1

3
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 5
F1C
F2C
F5C
F6C
F6C
F5C
F2C
F1C
F7C
S1
F7C
F7C
F7C
Step - 6
F3C
F4C
F3C
F4C
F3C
F3C
F4C
F4C

4
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 7
S1
F8C
F8C
F8C
Step - 8
F9C
S1
F9C
F9C
F9C
F9C
F10C
F9C
S1
F10C

5
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 9
F2C
F1C
F2C
F1C
S14
F11C
Step - 10
1
2
Fig. 2
F1C
BC1C
S1
F2C
BC2C
S1
F1C
F2C
BC1C
BC2C
BC2C
BC1C
BC3C
BC4C
BC4C
BC3C
F6C
F5C
FRONT
BACK
LEFT
RIGHT
Fig. 1
F1C
F2C

6
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 11
Note
After assemble the Base ‘U’ Channel it can be
filled with concrete up to the Foundation level.
Concrete
The Plywood can be placed by this sizes inside
the base ‘U’ Channel.
Option - 1
Option - 2
The Plywood should be placed after
completing the Wall Panel Assembly.

7
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
B. Wall Assembly
Parts needed:
W1C 10
W2C 1
W3C 1
W4C 1
TC1C 1
TC2C 1
TC3C 1
TC4C 1
TC5C 1
TC6C 1
TC7C 1
TC8C 1
CC 4
DCRC 1
DCLC 1
DSC 2
TS1C 2
TS2C 2
TS3C 3
RSC 3
RSJC 6
S1 46
S11 52
S12 12
S13 12
S17 8
S18 8
S19 8
CODE QTY
Fig. 2
BC1C
W1C
BC3C
Step - 1
Fig. 3
W1C
S11
W1C
BACK
FRONT
RIGHT
BC2C BC4C
BC3C
BC2C
BC1C
S11
2&3
1
W1C
W4C
Note This Insulated Cabin included with one
Window Panel (W4C) . This can be fix Four
position as shown.
FRONT
RIGHT
BC2C
BC1C
BC4C
BC3C
BACK
LEFT
Fig. 1
W1C

8
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
W1C
BC1C
BACK
RIGHT
BC3C
Step - 2
W1C
W1C W1C
1
2
S11
BC3C
Fig. 1 Fig. 2
Step - 3
CC
BACK
RIGHT
3
1&2
4
BC1C
BC3C
BC3C
BC1C
CC CC
S1
CC
W1C W1C
S1
CC
W1C W1C
Fig. 1 Fig. 2
Fig. 3 Fig. 4
S11
BC1C

9
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 4
2
W1C
S11
Fig. 1 Fig. 2
Fig. 3
BACK
W1C
W1C
S11
S17
W1C
W1C
Step - 5
W1C
S17
W1C
W1C
1
2
1
3
3
BC1C
BC2C
Fig. 1 Fig. 2
Fig. 3
BACK
W1C
W1C
S11
1
3
S17
BC2C
INSIDE
S17
S17
S11
S11

10
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
BACK
LEFT
Step - 6
W1C
BC4C
S11
W1C
W1C
W1C
BC4C
S11
1
2
Step - 7
Fig. 1 Fig. 2
1
3
2
W1C
CC
BC4C
LEFT
CC
S1
CC
BC4C
W1C
S1
Fig. 1 Fig. 2
Fig. 3
CC

11
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 8
BACK
TC4C
TC4C
CC CC S1
TC3C
TC3C
CC
CC
S1
TC4C
W1C
CC
CC
S11
5
1&2
3&4
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
S11
S11
S11
S11
Step - 9
W1C
W1C
W1C
BC3C
RIGHT
FRONT
W1C
W1C
Fig. 3
Fig. 1Fig. 2
S11
S17
W1C
W1C
1
BC4C
BACK
1
3
3
2
S1
S1
TC4C
TC3C
S17
S17
S11
S11

12
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
FRONT
RIGHT
Step - 10
1
2
W1C
BC2C
S11
W1C
W1C
W1C
BC2C
S11
Step - 11
FRONT
RIGHT
BC2C
BC4C
CC CC
S1
CC
W1C W1C
S1
CC
W1C W1C
Fig. 1 Fig. 2
Fig. 3 Fig. 41&2
3
4
CC
BC2C
BC4C
Fig. 1 Fig. 2

13
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 13
TC5C
TC6C
S11
TC5C
TC5C
CC
CC
W1C
S1
Fig. 1 Fig. 2
TC6C
CC
TC6C
CC
S1
Fig. 3 Fig. 4
Fig. 5
TC5C
TC6C
W1C S11
1&2
5
3&4
Step - 12
TC5C
S1
TS1C
TC6C
TS2C
TC5C
TS1C
S1
RIGHT
BACK
S1
S1

14
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 14
2
1
3
Fig. 1 Fig. 2
Fig. 3
S11
W3C
BC2C
W3C
BC2C
FRONT
W3C
W1C
W1C
Step - 15
W1C
W1C
S11
W1C
S17
W1C
1
1
3
3
2
Fig. 1 Fig. 2
Fig. 3FRONT
LEFT
S17
S11
S17
S17
S11
S11
S17
W3C

15
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
FRONT
W2C
BC1C
Step - 16
1
2
Fig. 1 Fig. 2
W2C
W1C
W2C
BC1C
S11
Step - 17
CC
CC
CC
S1
BC3C
BC1C
CC
W2CW1C
S1
W2C
W1C
FRONT
1
2
3
Fig. 1 Fig. 2
Fig. 3
BC3C
BC1C

16
IMPORTANT : USE HAND GLOVES TO PREVENT INJURY.
Step - 18
TC7C
S1
TS1C
TC8C
TS2C
S1
Step - 19
TC7C
TS1C
TC7C
TC7C
CC
CC
W1C
S1
Fig. 1 Fig. 2
TC8C
CC
TC8C
CC
S1
Fig. 3 Fig. 4
Fig. 5
TC8C
TC7C
W1C
S11
1&2
3&4
5
LEFT
BACK
CC
CC
S11
S11
S11
TC7C
TC8C