Durablow Smart Home Series User manual

Supported Control
+ Smart Life APP
+ Amazon Alexa
+ Google Assistant
+ Samsung SmartThings
+ IFTTT
Durablow® Smart Home Series -
SH3001 / SH3001-RH (Wi-Fi)
Gas Valve Remote Control
®

1

2

01
02
03
04
CON
TENTS
3

1
4

15

1
Pic. 1 Pic. 2 Pic. 3 Pic. 4
6

1
Pic. 1 Pic. 2
7

1
Pic. 1
Pic. 2
Pic. 3
8

2
9

2ADD DEVICE & RESET BUTTON (Pic. 3)
Pic. 1 Pic. 2
1. Power ON your device.
2. Login your Smart Life App, and tap the “+” or
“Add Device” Icon (Pic. 1) to add device in
Smart Life App, select the right device (Pic. 2).
For SH3001, “Switch (Wi-Fi)” is preferred.
3. Make sure your phone has been connected
with the strongest WiFi signal nearby.
Find RESET BUTTON
on controller box
Pic. 3
10

2ADD DEVICE (EZ mode)
Pic. 1 Pic. 2
There are two modes:
1. EZ mode (defult mode).
2. AP mode.
2.
hoose “EZ Mode”, please make
sure the device’s indicator light
rapidly flashes. (Pic. 2)
Pic. 3
11

2
2 Blinks / Sec
12
Find RESET BUTTON
on controller box

2ADD DEVICE (AP mode)
Pic. 1 Pic. 2
hoose “AP Mode”, the device’s
indicator light slowly flashes.
(Pic. 1)
Pic. 3
13

2HOW TO MAKE INDICATOR SLOWLY BLINK? 14
For AP mode
2 Blinks / Sec
1. Unplug from outlet and wait for 10
seconds, and plug in back.
2. Press reset button on the device for
5 seconds or longer.
3. Release the button once indicator
starts blinking (2 blinks per second).
1 Blink / 3-Sec
4. Press the reset button again for 5
seconds or longer until indicator starts
blinking slowly (1 blink every 3-second).

215

216

3
WIRING & FUNCTIONS
17

3PACKING LIST 18
Pic. 1 Pic. 2 Pic. 3 Pic. 4
(Pic. 1)
(Pic. 2)
(Pic. 3)
(Pic. 4)
(Pic. 5)
Pic. 5

319