Duxbury Networking DUX106G User manual

INSTALLATION GUIDE
4+2 Port Gigabit AI POE Switch
DUX106G

INTRODUCTION
AI Extend: support 250Meters
long-distance power supply
(recommended Cat5e or 6
network cable)
AI VLAN: Isolating ports 1-4 to
each other can effectively suppress
network storms and improve network
performance.
AI QoS: Prioritize identified video
data to make video transmission
smoother
AI POE: Automatically detect the
power receiving port, find the dead
device, power off and restart the
device
Support IEEE802.3af/at standard PD
device;
Supports uplink port auto-flip (Auto
MDI/MDIX)
Adopt store-and-forward exchange
mechanism
Intelligent power supply, lowest
power consumption, ensure the
power demand of the PD terminal
With power circuit protection, it can
protect the security of the back-end
equipment;
Zero configuration feature power is
automatically supplied to the adap-
tive device;
Fanless design to achieve energy
saving and environmental protection;
Support port no link power saving
function;
60W PoE Budget
KEY FEATURES
DUX106G is a 6 port Gigabit AI PoE switch with 4 working modes, AI VLAN mode,
AI Extend mode, AI power mode, AI QoS mode. By default, all ports are free to
communicate; when AI VLAN mode is enabled, 1-4 ports are isolated from each
other, which can effectively suppress network storms and improve network
performance. In the AI Extend mode 1-4 ports can effectively transmit distances up
to 250 meters, which is suitable for remote monitoring and power supply. In the AI
power mode, the switch automatically detects the working status of the PD device. It
will restart any device with abnormal behavior. In the AI QoS mode, when the device
is congested, video data is processed preferentially. The device supports the
standard IEEE 802 af/at protocol, which can automatically detect and identify the
PDs that comply with the IEEE 802 af/at, no need to worry about damage to PoE or
non-PoE devices.

Internet
Power
24-Port Gigabit Switch
PD
PC
Bridge IP-CameraAP
INSTALLATION DIAGRAM
Indicator status
LED
Color
State
Description
On The Port Status LEDs are displaying link status, network activity and
speed of each port.
On The RJ45 Port Status LEDs are displaying PoE powering status of
each port.
The RJ45 Port Status LEDs are displaying PoE powering status of
each port.
Link/
Act
Indicator
Off
If the light is off, please check and replace the RJ45 to see if it resolves
the problem. It is likely that the issue is with the switch port or
connectivity device such as the adapter, camera or IP phone.
Please contact our support engineers for assistance.
Installation Suggestion:
1. Connect all your networking equipment (including any PoE devices) to the switch.
2. Connect power to your switch and wait a moment for it to power on.
3. Check the status of your switch.
4. Use the switch in a clean, cool and dry environment.
5. Remove the power cable before any new devices are connected to the switch.
6. Only use CAT 5 or above to ensure maximum distance of up to 100m/250m

SUPPORT
www.duxbury.co.za
Johannesburg
Block 2 Riviera Office Park
66 Oxford Road
Riviera
2193
Tel: [phone]
Fax: [phone]
Support: [email protected]o.za
Info: [e-mail]
Cape Town
1 Mews Close
Waterhouse Place
(Off Century Boulevard)
Century City
Cape Town
7441
Tel: [phone]
Fax: [phone]
Info: [e-mail]
Durban
Block 2, Suite 222
2nd Floor Island Office Park
35/37 Island Circle
Riverhorse Valley Business Estate
Durban
Tel: [phone] / 9088
Fax: [phone]
Info: jpilla[email protected]o.za
Thank you for selecting a Duxbury Networking product.
Duxbury Networking recommends that you use only the official Duxbury Networking
resources.
If you experience any technical difficulty with your product, please locate the serial
number on the label of your product and contact us on:
SPECIFICATION
Network Port
4 10/100/1000Mbps PoE+ RJ45 port ( Port 1~ port4）
2 10/100/1000Mbps RJ45 port uplink(Port5~port 6)
Transfer Rate
1000Mbpsfull Duplex
Network
protocol and
standard
IEEE802.3i、IEEE802.3u、IEEE802.3x、IEEE802.3af,
IEEE802.3at,,IEEE802.3ab
Performance
Bandwidth：12Gbps(no block)）
Frame filtering and transmission rate:
10M port maximum 14,800pps
100M port maximum 148,800pps
1000M port maximum 148,800pps
LED
indicator
Power
RESV
LINK/ACT
POE pin
1/2/4/5(+)，3/6/7/8(-)
Power
Max power for single port : 30W.
External power adapter ：60W；
Dimensions
Size（LxWxH）：125mmx 75mmx 27mm
Weight：0.5kg
Environment
Operating Temperature：0°~40°C
Operating Humidity：10%~90%，Non-condensing
Safety
Regulation
CE/ROHS/FCC/CCC