Duxbury Networking DUX1510P User manual

INSTALLATION GUIDE
8 + 2 GIGABIT LAYER 2
Managed PoE Switch
DUX1510P

DUX1510P is a Layer 2 10-port PoE+ (8 x Gigabit RJ45, 2 x Gigabit SFP) Managed
Switch. The switch is designed with new generation of high-performance hardware
and software platforms, providing flexible, cost-effective full Gigabit access and
uplink ports. As standard, it supports complete security mechanisms, improved
ACL / QoS strategy and rich VLAN capabilities. The switch is easy to manage
and maintain, meeting the user's requirements for easy to manage, high security
and low cost networks.
Web Login
Step1: In the normal operation of the device, connect the computer to the
switch's RJ45 port by network cable
Step 2: Manually changed the computer IP address to 192.168.254.X (X is 2 ~
254), subnet mask is 255.255.255.0
Step3: Open computer's browser, type 192.168.254.1 in the address box, hit
the Enter key
Step4: Enter the default username and password “admin” and then click Login
Step5: For detailed information please refer to the DUX150P User Manual
INTRODUCTION
Support 4 working modes, AI VLAN,
AI Extend AI PoE and AI QoS
Support High PoE, IEEE 802.at/af,
Max 46W output per port
150W Total PoE Power Budget
Port 1-8 support 250Meters long-dis-
tance power supply (recommended
Cat5e or 6 network cable)
Supports IEEE 802.3af/at standard,
automatically detects and identifies
devices that comply with the IEEE
802.3af/at standard and supply
power to it
Support Auto MDI/MDIX；
Adopt store-and-forward exchange
method
Intelligent power supply providing
the lowest power the PD (Power
Device) needs
With power circuit protection, pro-
tecting the safety of the PD
All ports have wire-speed forwarding
capability
Plug and play, easy to use or
Managed, supporting various Layer
2 functions (VLAN, QoS, Link
Aggregation, MSTP, Loop Protection,
IGMP-Snooping, 802.1x), Lite Layer 3
functions, PoE Management and
more Advanced settings
KEY FEATURES

1、Port funcon
1.1 Port management
Enable/disable port
Rate, duplex mode, MTU sengs
Flow control sengs
Port informaon view
1.2 Port isolaon Support single isolaon group
Support global
port isolaon
conguraon
1.3
Port mirroring
Support for exits, entrances, and full mirroring
1.4
Port speed limit
Support export, entry rate seng
1.5 Trac Stascs Support packet/byte recepon/send stascs
1.6 Port energy saving
Support 802.3az EEE port energy-saving
technology
2、
POE Management
2.1 Port PoE management
Switch POE power supply, congure port
output power
2.2
Device Informaon
View POE chip temperature and output status
2.3
Timing power supply
conguraon
Congure power supply policy, set port power
supply strategy
2.4
AI PS conguraon
Set the total power supply, zero ow duraon
3、Layer 2 funcon
3.1 Mac Address table
Support stac addion, deleon and support
aging me seng
3.2 VLAN
Support hybrid、translate port mode
Support VLAN learning mode
SupportVoice VLAN
3.3 Link aggregaon
Support stac link aggregaon
Support dynamic LACP aggregaon
INTERFACE FUNCTION LIST

3.4 Storm control
Support broadcast, mulcast, unknown
unicast control
3.5 Spanning tree
Support 802.1d (STP)
Also supports
ERPS (Private
Agreement)
Support 802.1w (RSTP)
Support 802.1s (MSTP)
3.6 DHCP-snooping
Support for stac binding
Support port Untrust/IPSGconguraon
3.7 IGMP-snooping
Support stac addion, deleon
Support v1/2/3 dynamic mulcast snooping
4、Advanced sengs
4.1 QOS
Based on 802.1p (COS) classicaon
Based on DSCP classicaon
Support SP, WRR, DRR scheduling strategies
4.2 ACL
Based on source MAC, desnaon MAC,
protocol type, source IP, desnaon IP, L4
port number
Support me-range me period management
4.3 SNMP
Support V1/V2/V3 version network
management protocol
4.4 RMON
Supports event groups, stascs groups,
history groups, and alarm groups.
4.5
LLDP
Support LLDP link discovery protocol
4.6
Loop protecon
Support ring network protecon
4.7 NTP Conguraon
Support me zone selecon, NTP server
manual addion
4.8
An-aack
Support DDOS, ICMP aack protecon

5、System sengs
5.1
User sengs
Modify user password
5.2
Network sengs
Support automac acquision of IP/stac IP
5.3
Serviceconguraon
Turn telnet port on/o
5.4
Conguraon
management
reset
5.5
Firmware upgrade
Upgrade the latest version of the soware
5.6
Log
User login, operaon, status, event log

Internet
Power
24-Port Gigabit Switch
PD
PC
Bridge IP-CameraAP
INSTALLATION DIAGRAM
Indicators
Title Color
Work
status
Descripon
POWER Power
indicator
Solid
Power is normal
O
No power, the power switch is not turned on,
power supply is abnormal
POE
POE
power
indicator
Solid
The corresponding RJ45 port is connected to the
powered device and the power supply is normal
O
The corresponding RJ45 port is not connected to
the powered device or the power supply is
abnormal
LINK/ACT
Connec
on
indicator
Blinking A valid link is established
OAn invalid link is established
SYS System
indicator
Blinking
System is funconing properly
O
System is funconing improperly Soware is
damaged
9-10 SFP
indicator
Blinking
A valid link is established on the SFP port
OAn invalid link is established on the SFP port

SHORTCUT BUTTON
QOS: Improve video data processing capabilities and improve the monitoring of
Caton and Mosaic phenomena in the network
EXTEND: 1-8 port rate down to 10Mbps, but the transmission distance up to 250 meters
VLAN: Isolating ports 1-8 from each other, suppress network storms effectively and
improve network performance
AI PS: Detect PD, power failure and restart dead equipment
RST Button
When the switch is powered on, press the button with the needle to release the
device and enter the restarting state. When the SYS lamp restarts, the device
restarts. When the switch is powered on, press and hold the button for more than 5s
to release the button and enter the reset state. When SYS is re-lit, the device is reset
successfully
Console port
Console port used to connect to computer or other terminal to manage or configure
the switch.
Installation Suggestion:
1. Connect all your networking equipment (including any PoE devices) to the switch.
2. Connect power to your switch and wait a moment for it to power on.
3. Check the status of your switch.
4. Use the switch in a clean, cool and dry environment.
5. Remove the power cable before any new devices are connected to the switch.
6. Only use CAT 5 or above to ensure maximum distance of up to 100m/250m

SUPPORT
Johannesburg
Block 2 Riviera Office Park
66 Oxford Road
Riviera
2193
Tel: [phone]
Fax: [phone]
Support: [email protected]o.za
Info: [e-mail]
Cape Town
1 Mews Close
Waterhouse Place
(Off Century Boulevard)
Century City
Cape Town
7441
Tel: [phone]
Fax: [phone]
Info: [e-mail]
Durban
Block 2, Suite 222
2nd Floor Island Office Park
35/37 Island Circle
Riverhorse Valley Business Estate
Durban
Tel: [phone] / 9088
Fax: [phone]
Info: jpilla[email protected]o.za
www.duxbury.co.za
Thank you for selecting a Duxbury Networking product.
Duxbury Networking recommends that you use only the official Duxbury
Networking resources.
If you experience any technical difficulty with your product, please locate
the serial number on the label of your product and contact us on: