DVDO Camera-Ctl-1 User manual

-1-
DVDO-Camera-Ctl-1
IP Camera Control
Keyboard
Version 1.0.0
User Manual

-2-
Table of Contents
1. Product Description ........................................................................... 3
1 1 Brief Description 3
1 2 Features 3
1 3 Keyboard Appearance 3
1 4 Keyboard Interface 4
1 5 System Diagram 5
2. System Settings.....................................................................................6
2 1 Language Setting 6
2 2 Hardware Settings 6
2 3 Network Settings 7
2 4 System Upgrade 7
2 5 About System 8
3. PTZ Mode .............................................................................................8
3 1 Equipment Management 8
311 Auto Search 9
312 Add Manually 9
313 Delete Device 9
3 2 Video Display 10

-3-
1. Product Description
1.1 Brief Description
This product is an Android-based network touch keyboard with a 10 1-inch capacitive touch
screen and simple user interface The integrated touch screen can provide real-time previews
from camera feeds, and the system can output the image to an external display via HDMI It
supports single viewing of H 265 4K@30fps or H 264 1080p@60fps; and 4-channel
720p@30fps The system includes a joystick for PTZ control, and is suitable for unified control
where multiple network cameras are installed such as schools, hospitals, hotels, businesses, etc
1.2 Features
10 1-inch capacitive touch screen
Android 6 0 operating system
H 265/H 264 decoding, up to 4 screen partitions
Supports viewing images on the touch screen or external display via HDMI
Network access to full range of PTZ cameras
PTZ control, preset, cruise, track setting and recall
Supports ONVIF protocol
Controls up to 1024 cameras
Supports external mouse
1.3 Keyboard Appearance

-04 -
Left side button controls: Preset, cruise, scan and other programmable functions
Large middle screen area: 10 1-inch capacitive touch screen for operation and display
Right-side joystick control: PTZ control joystick (left/right/up/down/zoom) and
customizable shuttle dial
1.4 Keyboard Interface
No. Name Function
①
On/Off Switch
②
Power Input Standard 5 5/2 1 Power Interface, DC 12V2A±10%
③
Network Interface Network Connection

-5-
④
Reserved Manufacturer use only
⑤
USB Device upgrade control or external mouse control
⑥
Reserved Manufacturer use only
⑦
HDMI Synchronized external display with 10 1-inch screen
⑧
RS-232 For Pelco-D / Pelco-P / Visca control
⑨
RS-485 For Pelco-D / Pelco-P /Visca control
1.5 System Diagram

-6-
2. System Settings
2.1 Language Setting
Select Chinese or English
2.2 Hardware Settings
Toggle key-touch sound on / off

-7-
2.3 Network Settings
Network settings are static / DHCP optional Please save after modification
Note: The IP address of keyboard must be the same network segment as PTZ camera(s)
2.4 System Upgrade
Please copy the upgrade file onto a USB flash drive, then insert the flash drive into the USB port
on the back of the keyboard Select [System Update], then select [Install] on the pop-up upgrade
dialog box Once application is installed, select [Open]
Note: Do not modify the name of the upgrade file Do not power off during upgrade process

-8-
2.5 About System
Shows software version number of system
Click the pop-up menu bars at the upper right corner of the PTZ mode screen, then select
[Device Management] to enter the device management interface as shown below
3. PTZ Mode
3.1 Equipment Management

-9-
Note: In the PJZ control page, you can enter the last digits of the camera’s IP address directly
on the keyboard and then press the [Address] button to connect the PTZ camera In this
example, you may enter “239” to add the camera at 192 168 0 239; please use the actual last
digits of your camera’s specific IP address
3.1.1 Auto Search
Click [Search] / [Quickly Add] to search for IP cameras, then the [Search Results] dialog box
will pop up After inputting the IP address of the device to be added, click the + , fill in the
user name and password of the corresponding PTZ camera, then save
3.1.2 Add Manually
Click [Manually Add], then enter the device name, IP address, ONVIF port number, user
name, and password into the [Add Device] dialog box, then save
3.1.3 Delete device
Click the next to [Added Devices], then select the IP address of the device to be deleted,
then click [Delete], then click [OK]

3.2 Video Display
In [PTZ Mode], click the at the upper right corner Select [Video Display] to display a four-
image window Click on the screen to open the [Device Add] dialog box Double-click the IP
address of the camera to display the screen
-10-