Dvico Fusion Remote User manual

All specifications and information are subject to changes without further notices 1
Fusion Remote User’s manual
1. Installing the Fusion Remote Software
2. Connecting the USB Receiver
3. Using Fusion Remote

All specifications and information are subject to changes without further notices 2
1. Installing the Fusion Remote Software
Important: Installation on Windows 2000 Professional or Windows XP
Before you install Fusion remote software, be sure that you logged on as an account with
Administrator privileges.
1) Insert Fusion Remote Installation CD into the CD-ROM drive of the computer
2) Wait a few seconds and the installation program will start automatically. Click “Next” to start the
Remote transceiver installation.
3) The “Choose Destination Location” window will appear. Click on “Next” if you want to install the
Fusion Remote in the default directory. Otherwise, you can choose a different directory by clicking
on “Browse”

All specifications and information are subject to changes without further notices 3
4) Click on the “OK” to restart and finish installation.
2. Connecting the USB Receiver
1) Connect the IR receiver module to the PC’s USB port.
2) After IR receiver and Fusion remote software is
installed, please reboot and start the configuration
by right clicking the Fusion Remote icon at the low
right bottom of the screen.
3) Please select the port that IR receiver module is attached and press the any button on the remote
transceiver. A Dialog box with the remote transceiver buttons will appear.

All specifications and information are subject to changes without further notices 4
Tip Fusion Remote program will start automatically when the PC is booted. You can check the Fusion
Remote program availability at the Task Bar of Windows like the picture below.
Tip If connect Fusion Remote receiver, run Plug & Play. Right click the “My computer” icon Æproperties
Æhardware Ædevice manager to see receiver is properly installed
< Battery change>
- Use new batteries.( 2 AA size batteries are included in the package )

All specifications and information are subject to changes without further notices 5
3. Using FusionRemote
This indicates Remote Buttons.
3.1 Using For FusionHDTV
Volume Up/Down
Snapshot
Aspect ratio
Rewind
MUTE
PC OFF
Record
STOP
PLAY/PAUSE
Fast Forward
Display Size toggle
Numeric Key
File Open
DTV/ATV or LiveTV
Channel Up/Down
Instant replay Instant forward
Alt-Tab
Input change
EPG
Profile start
Configuration
Before Channel
MCE DVD MENU
User profile
PowerDVD start
WinAMP start
FusionHDTV start
Direction/Enter
MCE start/Exit

All specifications and information are subject to changes without further notices 6
3.2 Using Remote profile program
1. WinAMP
You can use Fusion Remote as the simple replacement of the keyboard. Press the CPF button on the
remote transceiver for customizing the remote transceiver keys for the program you selected.
Volume Change
Open Directory
Repeat playback
Rewind
Minimize
PC OFF
Exit WinAMP
Stop
Play
Fast Forward
Toggle Shuffle Play
Numeric Key
Open File
Open URL
Next Track
Instant replay Instant Forward
(Alt-Tab
TAB Key
Select Skin
Start profile
Show File information
User Profile Change
WinAMP Start
Direction/Enter
Before Track

All specifications and information are subject to changes without further notices 7
2. PowerDVD
You can use Fusion Remote as the simple replacement of the keyboard. Press the CPF button on the
remote transceiver for customizing the remote transceiver keys for the program you selected.
Volume Change
Select Audio
Repeat Playback
Rewind
Mute
PC OFF
Exit PowerDVD
Stop
Play/Pause
Fast Forward
Display Size Change
Numeric Key
Open Disk
SubTitle On/Off
Before Chapter
Play Bookmark Add Bookmark
(Alt-Tab
TAB Key
Skin Toggle
Profile Start
Configuration
Select Source
SPACE Key
User Profile Change
PowerDVD Start
Direction/Enter
Next Chapter

All specifications and information are subject to changes without further notices 8
3. Window Media Player 9
You can use Fusion Remote as the simple replacement of the keyboard. Press the CPF button on the
remote transceiver for customizing the remote transceiver keys for the program you selected.
  
Volume Change
SnapShot
Full mode
Rewind
Mute
PC OFF
Exit Media Player
STOP
Play/Pause
Fast Forward
Display Size Toggle
Numeric Key
File Open
SubTitle On/Off
Before File
Alt-Tab
TAB Key
Profile Start
Configuration
Shuffle play
User profile Change
Direction/Enter
Next File
Skin Mode

All specifications and information are subject to changes without further notices 9
4. Window MCE 2005
You can use Fusion Remote as the simple replacement of the keyboard. Press the CPF button on the
remote transceiver for customizing the remote transceiver keys for the program you selected.
TV Guide
Volume Up/Down
Snapshot
Pause
Rewind
Mute
PC Off
Record
Stop
Play
Fast Forward
Toggle Display Size
Numeric key
Recorded File open
TV Start
Channel Up/Down
REPLAY SKIP
Alt-Tab
MORE info
Profile Start
Main Menu
BACK
User profile change
PowerDVD Start
WinAMP Start
FusionHDTV Start
Direction/Enter
DVD MENU
MCE Start/Exit

All specifications and information are subject to changes without further notices 10
3.3 Using Customize mode
When you are not using the FusionHDTV, you can use Fusion Remote as the simple replacement of the
keyboard. You can define the key-button mapping of any program you want to use with the Fusion Remote.
Please refer to the instruction below.
1) Create the profile you want to define like the picture below.

All specifications and information are subject to changes without further notices 11
2) After pressing the New button input the profile name and the execution path of the program. The
program will be started by pressing the red start button of the remote transceiver.
3) After adding the profile please press the <- button to select the profile for key define.
4) Please press the blue button on the remote transceiver for customizing the remote transceiver keys
for the program you selected.

All specifications and information are subject to changes without further notices 12
5) If you press the Customize… button on the picture above you will see the remote transceiver pop up.

All specifications and information are subject to changes without further notices 13
6) Please press button on the remote transceiver and input the keys or shortcut keys you want to map
to the button.
Press SaveAll button when you are done
7) Clear button clears the button defined.
8) You can set the OSD setting in accordance to each profile like the picture below.