Dynablend DB-850G User manual

Horsepower Plus™
DB-850G High Power Blender
Operation
Manual
Read Instructions Before Using

2

3
INTRODUCTION
Thank you for purchasing the Dynablend®Horsepower Plus™high power blender with a glass
pitcher. You’re minutes away from creating your very own favorite recipes.
Dynablend®Horsepower Plus™is America’s first high power blender that offers both
Pre-Programmed Buttons and a Variable Speed Dial, with a Glass Pitcher and Stainless
Steel Utility Scoop. Designed for easy cleaning, Dynablend®Horsepower Plus™comes with
a detachable blade assembly unlike other high power blenders on the market.
The Dynablend®Horsepower Plus™is able to do almost anything a “super power” blender
can do with more preferable materialslike glass and stainless steel. In addition to blending
just about any fruit or vegetable, it’s high powerd 1.1 horsepower motor easily blends ice
and frozen fruits. It’s also perfect for making sauces, salsa, sorbets, soups, protein shakes,
fruit smoothies, and baby food. And with the stainless steel grinding blade, included with
the Dynablend®Horsepower Plus™, grinding dry ingredients such as coffee beans, nuts,
grains, herbs, and even gritty flax seeds is a snap.
Take a moment to familiarize yourself with your Dynablend®Horsepower Plus™and make
sure you have received all the parts included with your package. We recommend you wash
all the parts with warm water and a mild detergent before you first use your Dynablend®
Horsepower Plus™. Once you have done so, you are now ready to begin creating scrumptious
delights for you and your family.
Please take the time to read through the entire operation manual for proper use and care
instructions. Following the instructions in this manual will ensure that your Dynablend®
Horsepower Plus™serves you faithfully for years to come.
We hope you will enjoy your Dynablend®Horsepower Plus™as it helps you stay in control
of your diet and health.

4

5
TABLE OF CONTENTS
Introduction
Important Safeguards....................................................................................................6
Standard Parts..............................................................................................................8
Names of Parts.............................................................................................................9
Before First Use..........................................................................................................10
Operation Instructions..................................................................................................11
Cleaning and Storage...................................................................................................12
Warranty.....................................................................................................................14
Parts and Optional Accessories....................................................................................16
Recipes......................................................................................................................17
Product Standard........................................................................................................30

6
IMPORTANT SAFEGUARDS
When using electrical appliances, the following basic safety precautions
should always be adhered to:
1. Read all instructions.
2. Avoid electrical shock: do not put cord plug, base, or motor in water or other liquid;
never put a wet plug into an outlet, or handle with wet hands; never immerse the
Motor Base in water. Wipe with a damp cloth only and dry promptly.
3. Close supervision is necessary when any appliance is used near children. Children
under the age of 12m should not use this machine without adult supervision.
4. Unplug from the outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Blades are sharp, handle carefully. Avoid all contact when parts are still moving.
6. Always use on a level, sturdy surface.
7. Do not use outdoors.
8. Do not operate while driving a vehicle.
9. Do not operate any appliance with a damaged cord or plug. If the Dynablend®
malfunctions, is dropped, or damaged in any manner, call the Main Service Center
(888-254-7336) to get a Return Merchandise Authorization (RMA) No. prior to sending
your Dynablend®to the service center. Returns will not be accepted without a RMA No.
clearly written on the box.
10. Only use attachments sold by Tribest®with the Motor Base. The use of attachments,
including canning jars, is not recommended by the manufacturer and may cause injury
to persons or damage to the Dynablend®.
11. Do not let cord hang over an edge of a table or a counter, or touch the stove or other
hot surfaces.
12. To avoid injury, properly attach the Blade Assembly to the Glass Pitcher base.
13. Do not blend liquids over 104°F. When blending hot liquids, remove center piece of the
two-piece lid.
14. Only use the Dynablend®for its intended purpose. For Household use only. Not for
commercial use.
15. Wash the Glass Pitcher and Blade Assembly immediately after each use.
16. In 30 second Pulse mode, always allow the machine to rest for at least one minute
between consecutive blending cycles of 30 seconds. When blending in the 60 second
cycles, 60 second Blend or Combo mode, do not exceed 3 consecutive cycles.
17. Store the Glass Pitcher with its Lid. Make sure the parts are thoroughly dry.
18. The Dynablend®has a polarized plug. To reduce the risk of electric shock, this plug
will fit in a polarized outlet in only one way. If the plug does not fit properly in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.

7
19. Keep hands and utensils out of the Glass Pitcher while blending to reduce the risk of
severe injury to persons or damage to the Dynablend®. A scraper may be used but
must be used only when the Dynablend®is not running.
20. Always operate the Dynablend®with the lid in place.
21. To reduce the risk of injury, never place the Blade Assembly on the Motor Base without
the Glass Pitcher properly secured to the base.
SAVE THESE INSTRUCTIONS

8
STANDARD PARTS
Please check if all parts described below are included.
If not, please call 888-254-7336 for your replacement.
Dynablend®Horsepower Plus™
1) Motor Base
2) Glass Pitcher
3) Stainless Steel Blade Assembly
4) Lid
5) Lid Cap
6) Utility Scoop
7) Blade Opener
8) Silicone Seal
2
3
4
5
7
1
6
8
60
60
MIN
ON
OFF
MAX
sec
sec
Combo
Blend
Pulse
sec
30

9
NAMES OF PARTS
Lid Cap
Lid
Glass Pitcher
Silicone Seal
Blade Assembly
Dial
Pre-Programmed Buttons
Electric Cord Tidy

10
BEFORE FIRST USE
1. Clean all parts thoroughly and dry.
2. Take out the required length of cord from the Electric Cord Tidy at the base of the
Dynablend®, and plug it into an outlet.
NOTE: The Red Dial Light will flash if the Dial is at the ‘OFF’ position.
3. Turn on the machine by turning the Dial to the ‘ON’ position. The Red Dial Light
will become solid and the Blue Pre-Programmed Button Lights will be blinking.
Now, your machine is ready to use.
NOTE: 1) For safety reasons, if the electricity goes out while the Dynablend®is in
operation with the Dial positioned at a variable speed, the Red Dial Light will
flash without resuming operation. This prevents the motor from automatically
engaging when the electricity comes back on. If this occurs, turn the Dial to the
‘ON’ position and make sure the Red Dial Light becomes solid and the Blue
Pre-Programmed Button Lights blink, and then resume operation.
2) If the electricity goes out while the machine was in operation with the
Pre-Programmed Buttons, the Red Dial Light will be solid and the Blue
Pre-Programmed Button Lights will blink when the electricity comes back on.
You may then resume operation.