Dynalink A 3134E User manual

Dynalink® A 3134E HDMI Splitter
Distributed by Altronic Distributors Pty. Ltd.
• Perth • Sydney • Melbourne
Phone: [phone] Fax: [phone]
altronics.com.au
HDMI 2.0 1x2 HDMI Splitter
Altronic Distributors warrants this product for one year from date of purchase from Altronics or its resellers
to the consumer. If this item is part of an installation or another product, please contact the installer or
supplier for your warranty.
During the warranty period, we undertake to repair or replace your product at no charge if found to be
defective due to a manufacturing fault. The warranty excludes damage by misuse or incorrect installation
(i.e. failure to install and operate device according to specifications in the supplied instruction manual),
neglect, shipping accident, or no fault found, nor by use in a way or manner not intended by the supplier.
For speakers, misuse includes burnt out voice coils.
For repair or service please contact your PLACE OF PURCHASE.
If this item was purchased directly from Altronics please make a warranty claim by:
1. FOR MAIL ORDER CUSTOMERS (includes school and trade orders),
a) Ringing us on 1300 797 007 and quoting your tax invoice number.
b) Upon contacting Altronics, we will issue an R.A. (Return Authorisation). As Altronics have a
number of service agents throughout Australia, a copy of the R.A. will be emailed, faxed or mailed to
you with full instructions of how and where to send the goods. The freight for shipping goods back to
Altronics for all repairs is at the customer’s expense.
c) A copy of the R.A. form, (or at the very minimum, the R.A. number) must accompany the goods to
effect the repair.
d) Altronics will pay the return freight to the customer where the warranty claim has been accepted.
e) Please quote the R.A. number in any correspondence to us.
2. FOR OVER THE COUNTER PURCHASES; to make a warranty claim, please return the goods
to us in any of our stores, with a copy of your proof of purchase (tax invoice).
a) Upon leaving the goods at one of our stores, an R.A. number will be issued to you.
b) Once repaired, you will be contacted, advising that the goods are ready to be collected from
the store.
It is at Altronics discretion as to whether the goods will be repaired or replaced (whilst under
warranty); and as to whether identical goods will be used to replace the item due to changes of
models / products.
Note: Under no circumstances should you attempt to repair the device yourself or via a non-
authorised Altronics service centre, as this will invalidate the warranty!
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure.
Operating Instructions
A 3134E
Supports HDCP2.2, 3D, 4K UHD@60Hz (YUV 4:4:4), 18GBPS,
HDR, EDID
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference. The information in this document is subject to change
without notice. Every effort has been made in the preparation of this document to ensure
accuracy of the contents, but all statements, information, and recommendations in this docu-
ment do not constitute the warranty of any kind, express or implied.
• Simultaneously displays an UItra Hi-Def source on up to two UItra HD
displays • Video Resolutions up to UItra HD 4Kx2K (3840x2160p) @60Hz
YUV 4:4:4. Also supports 3D TV • Three kinds of EDID handling abilities
• HDCP2.2/1.4 Compliant • 36 bit Deep Color • LPCM 7.1, Dolby TrueHD,
Dolby digital Plus, and DTS-HD Master Audio • Bandwidth 18Gbps
• Supports HDR • Online rmware upgrade via Micro USB Port
PACKAGE CONTENTS: 1 x HDMI Splitter, 1 x 5V/1A DC USB Adapter, 1 x User Manual
14

Dynalink® A 3134E HDMI Splitter Dynalink® A 3134E HDMI Splitter
OVERVIEW
This is a high performance 1x HDMI input to 2x HDMI output switcher which is powered via a USB port.
The system supports all 3D TV formats in addition to all HDTV formats up to 4K Ultra HD (3840 x 2160p)
@60Hz video. It also supports HDCP 2.2 compatibility.
SPECIFICATIONS
Note: 4K x 2K means 3840 x 2160p Ultra High Denition (UHD) resolution, which is often shortened to 4K
UHD, or even just 4K.
PANEL DESCRIPTIONS
1) Switch to “Copy EDID” mode
2) Switch to “Auto EDID” mode
3) Switch to “Mixed EDID” mode
4) Indicator of power input
5) Indicator of HDMI output
6) HDMI output ports
7) HDMI input port
8) Power/Firmware port
123 4 5
6 7 8
EDID FUNCTIONS:
Copy: Output 1 is prior port
a) When output 1 is connected to one display, another display which connected to output 2 will follow the
Resolution of output 1, which could be lower than 4K UHD.
b) When output 1 is disconnected, output 2 will output 4K UHD@60Hz which is default.
Auto: Default 4K UHD@60Hz on both HDMI outputs
Mixed: Always follows the lowest resolution of the displays connected to both outputs, so that the dis-
plays both show the source properly.
NOTE: The HDCP Version is prior to EDID, when the source is HDCP2.2. If the TV supports HDCP2.2, it
will output 4K@60Hz. If the TV doesn’t support HDCP2.2, it will output 1080p. Please see table below:
Support HDR under copy EDID and Mixed EDID mode!
Connecting and operating:
1) Connect the HDMI input source to input port of HDMI splitter.
2) Connect the HDMI splitter output ports to the displays.
3) Power up splitter, source and displays.
CONNECTION DIAGRAM
23
Operating Temperature
Operating Humidity
Bandwidth frequency
HDCP
Input ports
Output ports
Resolution outputs
Dimensions (LxWxH)
Power consumption
Transmission Distance
Net Weight
-5 to +40°C
5 to 90%RH (No Condensation)
18Gbps
HDCP2.2
1xHDMI (female)
2xHDMI outputs (female)
up to 4Kx2K (3840x2160@60Hz YUV 4:4:4)
93.6x61x15mm
1W (Max)
10m (Maximum) over standard HDMI
120g
Input source
HDCP2.2 4K@60Hz
HDCP2.2 4K@24Hz
HDCP1.4 4K@24Hz
HDMI Display Support HDCP2.2
HDCP2.2 4K@60Hz
HDCP2.2 4K@24Hz
HDCP1.4 4K@24Hz
HDMI Display Doesn’t Support HDCP2.2
HDCP1.4 1080p@60Hz
HDCP1.4 1080p@24Hz
HDCP1.4 4K@24Hz