Dynamic SFC3 User manual

Date: 8/1/2019
SFC3
OPERATORS MANUAL
Smart Flow Compu t er
Liqui d Pulse V e rsion
11 1 0 4 W.Airpo rt Blv d , Suite 108 & 1 4 8
Staf f ord, Texa s 77 4 77 USA
( 281 ) 5 65 - 11 18
F ax (2 81 ) 5 65 -1 11 9

Date: 8/1/2019
WARRANTY
Dynamic Fluid Measurement warrants to the owner of the Flow Computer that the
product delivered will be free from defects in material and workmanship for one (1) year
following the date of purchase.
This warranty does not cover the product if it is damaged in the process of being installed
or damaged by abuse, accident, misuse, neglect, alteration, repair, disaster, or improper
testing.
If the product is found otherwise defective, Dynamic Fluid Measurement will replace or
repair the product at no charge, provided that you deliver the product along with a return
material authorization (RMA) number from Dynamic Fluid Measurement.
Dynamic Fluid Measurement will not assume any shipping charge or be responsible for
product damage due to improper shipping.
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY EXPRESS
IMPLIED OR STATUTORY. BUT NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR ANY
WARRANTY ARISING OUT OF ANY PROPOSAL, SPECIFICATION, OR SAMPLE.
LIMITATION OF LIABILITY:
DYNAMIC FLUID MEASUREMENT SHALL HAVE NO LIABILITY FOR ANY
INDIRECT OR SPECULATIVE DAMAGES (INCLUDING, WITHOUT LIMITING
THE FOREGOING, CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES)
ARISING FROM THE USE OF, OR INABILITY TO USE THIS PRODUCT.
WHETHER ARISING OUT OF CONTRACT, OR UNDER ANY WARRANTY,
IRRESPECTIVE OF WHETHER DFM HAS ADVANCED NOTICE OF THE
POSSIBILITY OF ANY SUCH DAMAGE INCLUDING, BUT NOT LIMITED TO
LOSS OF USE, BUSINESS INTERRUPTION, AND LOSS OF PROFITS.
NOTWITHSTANDING THE FOREGOING, DFM’S TOTAL LIABILITY FOR ALL
CLAIMS UNDER THIS AGREEMENT SHALL NOT EXCEED THE PRICE PAID
FOR THE PRODUCT. THESE LIMITATIONS ON POTENTIAL LIABILITY WERE
AN ESSENTIAL ELEMENT IN SETTING THE PRODUCT PRICE. DFM NEITHER
ASSUMES NOR AUTHORIZES ANYONE TO ASSUME FOR IT ANY OTHER
LIABILITIES

Date: 8/1/2019
CHAPTER 1: QUICK START.................................................................................................................... 1-1
Introduction:............................................................................................................................................ 1-1
Technical Data.........................................................................................................................................1-2
Parts List..................................................................................................................................................1-3
Smart Flow Computer : Dimensions .......................................................................................................1-4
Starting and Installing the Software: .......................................................................................................1-5
System Minimum Requirements .........................................................................................................1-5
Website - DFC Configuration Software .................................................................................................. 1-6
Getting acquainted with the flow computer wiring: ................................................................................1-8
Back terminal wiring:.......................................................................................................................... 1-8
Back Panel Jumper ..............................................................................................................................1-9
Memory Jumper................................................................................................................................. 1-10
INPUT/OUTPUT: Assignment, Ranging, Wiring, and Calibration .................................................1-14
Input/Output Assignment ..................................................................................................................1-14
How to assign a transmitter to an I/O point:...................................................................................... 1-14
Ranging the Transmitter Inputs:........................................................................................................ 1-14
WIRING:...............................................................................................................................................1-16
Wiring the analog inputs: ..................................................................................................................1-16
Wiring the Analog Inputs 1-4 :.......................................................................................................... 1-17
RTD Wiring.......................................................................................................................................1-18
Wiring Analog Output:......................................................................................................................1-19
Turbine input wiring..........................................................................................................................1-20
Turbine input wiring for passive (dry contact) pulse generators .......................................................1-23
Density input wiring:......................................................................................................................... 1-24
RS-232 Connection ...........................................................................................................................1-25
RS-485 Connection ...........................................................................................................................1-26
Wiring of Status Inputs:.....................................................................................................................1-27
Wiring of Switch/Pulse Outputs:....................................................................................................... 1-28
I/O Expansion:...................................................................................................................................1-29
Wiring of Brooks Prover ...................................................................................................................1-32
Wiring of Calibron Prover................................................................................................................. 1-33
CALIBRATION.................................................................................................................................... 1-34
Analog Input 4-20mA or 1-5 volt signal: ..........................................................................................1-34
RTD calibration:................................................................................................................................1-35
Calibration of analog output:.............................................................................................................1-36
Multi-Variable Transmitters (Model 205)- DP and Pressure ............................................................1-36
Multi-Variable Transmitters (Model 205)- RTD...............................................................................1-37
Verifying Digital Inputs and Outputs ....................................................................................................1-38
Pulse Interpolation:................................................................................................................................1-39
Double Chronometry:............................................................................................................................1-39
Calculations and Terminology: .............................................................................................................1-40
Liquid pulse units .............................................................................................................................. 1-40
Terms.................................................................................................................................................1-40
CHAPTER 2: Data Entry ............................................................................................................................ 2-1
Introduction to the Smart Flow Computer Software................................................................................2-1
Introduction to the Flow Computer Software.........................................................................................2-1
ABOUT ...................................................................................................................................................2-1
FILE ........................................................................................................................................................2-2
Open a File ..........................................................................................................................................2-2
Open a New File..................................................................................................................................2-2
Delete a File.........................................................................................................................................2-2
Load File.............................................................................................................................................. 2-3
View File.............................................................................................................................................2-3
Save As................................................................................................................................................2-3
Save.....................................................................................................................................................2-4

Date: 8/1/2019
Save and Exit....................................................................................................................................... 2-4
Exit ......................................................................................................................................................2-4
PORT.......................................................................................................................................................2-5
PC Communication Set Up.................................................................................................................. 2-5
Flow Computer Communication Set Up .............................................................................................2-6
Dial......................................................................................................................................................2-7
Phone Book .........................................................................................................................................2-8
Modem Setup ......................................................................................................................................2-8
Hang-up Phone....................................................................................................................................2-8
DIAG....................................................................................................................................................... 2-9
Read Single Flow Computer Communication Setup...........................................................................2-9
Diagnostic Data ...................................................................................................................................2-9
PROVER ...............................................................................................................................................2-10
Prove Request....................................................................................................................................2-10
Prover Temperature Override............................................................................................................2-10
Prover Pressure Override................................................................................................................... 2-10
Prover Gravity Override....................................................................................................................2-10
Prover Shaft Temperature Override................................................................................................... 2-10
CTL or CPL Override........................................................................................................................2-10
Prove Data.........................................................................................................................................2-10
Prover Diagram ................................................................................................................................. 2-14
Previous Prove Report....................................................................................................................... 2-14
Single Prove Report...........................................................................................................................2-14
Prove Abort Report............................................................................................................................ 2-14
METER .................................................................................................................................................2-15
Batch and Stream Data ...................................................................................................................... 2-15
METER DATA .................................................................................................................................2-16
PRODUCT DATA ............................................................................................................................2-19
OTHER PARAMETERS ......................................................................................................................2-20
Day Start Hour (0-23)........................................................................................................................2-20
Company Name................................................................................................................................. 2-20
Flow Rate Average Second ...............................................................................................................2-20
Old Table Gravity Unit......................................................................................................................2-20
Disable Alarms.................................................................................................................................. 2-20
Print Intervals in Minutes .................................................................................................................. 2-20
GM/CC Conversion Factor................................................................................................................2-20
Weight of H2O in Vac @60 Deg.F ................................................................................................... 2-20
Atmospheric Pressure........................................................................................................................2-20
Pulse Output Width ...........................................................................................................................2-20
Date and Time ...................................................................................................................................2-20
End Batch .......................................................................................................................................... 2-20
Overrides:..........................................................................................................................................2-20
Security Code .................................................................................................................................... 2-21
INPUT/OUTPUT ..................................................................................................................................2-22
Transducer Input Assignment............................................................................................................ 2-22
Transducer Override..........................................................................................................................2-22
Calibration......................................................................................................................................... 2-22
Status Input Assignment....................................................................................................................2-23
Switch Output Assignment................................................................................................................2-26
Pulse Output and Pulse Output Width...............................................................................................2-26
Analog Output Assignment ...............................................................................................................2-30
Flow Computer Display Assignment................................................................................................. 2-32
Modbus Shift..................................................................................................................................... 2-34
REPORTS .............................................................................................................................................2-35
Current Data - Snapshot Totalizer Updates.......................................................................................2-35
Previous Batch Data ..........................................................................................................................2-35

Date: 8/1/2019
Previous Hourly Data ........................................................................................................................ 2-35
Previous Daily Data........................................................................................................................... 2-35
Previous Alarm Data ......................................................................................................................... 2-35
Audit Trail Report .............................................................................................................................2-36
Build User Report.............................................................................................................................. 2-36
View User Report..............................................................................................................................2-36
Formatted Ticket Report.................................................................................................................... 2-36
Auto Data Retrieval........................................................................................................................... 2-36
WIRING................................................................................................................................................2-37
PRINT ................................................................................................................................................... 2-38
Print "Help" File................................................................................................................................2-38
Print Modbus Registers .....................................................................................................................2-38
Print Schematic..................................................................................................................................2-38
Print Calibration Data........................................................................................................................ 2-38
Print Files .......................................................................................................................................... 2-38
CHAPTER 3: Flow Equations.....................................................................................................................3-1
FLOWRATES.........................................................................................................................................3-1
Mass Flowrate (MASS)....................................................................................................................... 3-1
PROVE EQUATION ..............................................................................................................................3-3
DENSITY EQUATIONS ........................................................................................................................ 3-6
Sarasota Density GM/CC ....................................................................................................................3-6
UGC Density GM/CC .........................................................................................................................3-7
Solartron Density GM/CC................................................................................................................... 3-8
CHAPTER 4: MODBUS DATA................................................................................................................. 4-1
MODBUS PROTOCOL.......................................................................................................................... 4-1
TRANSMISSION MODE................................................................................................................... 4-1
ASCII FRAMING ............................................................................................................................... 4-1
RTU FRAMING..................................................................................................................................4-1
FUNCTION CODE.............................................................................................................................4-2
ERROR CHECK ................................................................................................................................. 4-2
EXCEPTION RESPONSE..................................................................................................................4-2
BROADCAST COMMAND...............................................................................................................4-2
MODBUS EXAMPLES...................................................................................................................... 4-3
FUNCTION CODE 03 (Read Single or Multiple Register Points).....................................................4-3
Scaled Data Area (N: 1-meter1, 2-meter2, … 6-meter6)...................................................................4-13
Stream Data Area (N=: 1=Stream #1, 2=Stream#2, 3=Stream#3) .................................................... 4-14
Last Batch/Daily/Hourly Data Area .................................................................................................. 4-21
Stream Data Area - Last Batch/Daily/Hourly Data Area...................................................................4-22
Stream Data Area (N=: 1=Stream #1, 2=Stream#2, 3=Stream#3) ....................................................4-24
Last Prove Data Area.........................................................................................................................4-27
Current Prove Data Area ................................................................................................................... 4-32
Last Single Prove Report Data Area..................................................................................................4-33
Last Abort Prove Report Data Area................................................................................................... 4-34
Alarms and Status Codes...................................................................................................................4-37
Previous Audit Data Area:.................................................................................................................4-39
CURRENT ALARM STATUS......................................................................................................... 4-43
FLOATING POINT DATA AREA...................................................................................................4-46

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Quick Start —1-1
Date: 8/1/2019
CHAPTER 1: QUICK START
Introduction:
A good flow computer must be:
User friendly
Flexible
Easy to understand and configure
Rugged
Economical to install and maintain
Accurate
The model SFC332 Smart Flow Computer incorporates all these features. We hope that your experience
with the Smart Flow Computer will be a very pleasant and friendly experience and not intimidating in any
way.
General Description: The SFC332 is a dual meter run bi-directional flow computer for the measurement
of liquid products. Twelve days of previous daily data, twelve previous batch data, and twelve previous
hourly data are stored in the full format type reports. The previous 50 audit trail reports and 50 alarm
reports are stored. User formatted reports and user formatted ticket reports are available. Sixteen different
product files are user-configurable with easy switch feature and product scheduling for batch operation.
Inputs/Outputs: 2 serial connections, RS-232 and RS-485, both of them Modbus ready. The RS-232 can
also be used with serial printer. Inputs: two 4 wire RTD; 4 single ended analog inputs; , 4 status inputs;
and density frequency. Outputs: 2 pulse/switch outputs; 3 switch outputs; and 2 analog outputs.
Programmable plasma display.

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Quick Start —1-2
Date: 8/1/2019
Technical Data
POWER
VOLTAGE RANGE
12-30 VDC
WATTAGE
4 WATT
OPERATING CONDITIONS
TEMPERATURE
- 40 TO 185 °F
HUMIDITY
100%
HOUSING
NEMA 4X CLASS 1 DIV. 1
FEATURES
DISPLAY
PLASMA 2 LINES 16 CHARACTER
PROCESSOR
32-BIT MOTOROLA 168332 @ 16.7 MHz
FLASH ROM
4 MB @ 70 NANO SECONDS
ROM
2 MB @ 30 NANO SECONDS
FREQUENCY INPUT
3 CHANNELS
0 - 5000 Hz
>70 mV FOR SIN WAVE
> 6 VOLTS FOR SQUARE WAVE
ANALOG INPUT
FOUR 24-BIT CHANNEL
RTD INPUTS
2 CHANNELS 4 WIRES
ANALOG OUTPUT
2 CHANNELS 12 BIT SINGLE ENDED
DIGITAL OUTPUT
OUTPUTS 1 & 2 PULSE/SWITCH 0.5 AMPS RATING
OUTPUTS 3 TO 5 ARE SWITCH OUTPUTS 0.25 AMPS
RATING
STATUS INPUTS
4 ON/OFF TYPE SIGNAL
ALL INPUTS AND OUTPUTS ARE OPTICALLY ISOLATED
SERIAL
1 RS485 @ 9600 BAUDS VARIABLE
1 RS232 @ 9600 BAUDS VARIABLE
COMMUNICATION PROTOCOL
MODBUS

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Quick Start —1-3
Date: 8/1/2019
Parts List
Part
Description
332-01P
Controller (CPU) Board for SFC332/1000 w/prover option.
332-02
Terminal (BP) Board for SFC332/1000.
332-03
Analog Board for SFC332/1000.
332-04
Display (LCD) for SFC332/1000.
332-05
Rosemount Interface Board for SFC1000.
332-06
Prover Option for SFC332/1000.
332-07
Enclosure for SFC332/1000.
332-08
Mounting Bracket w/captive screws for SFC332/1000 Boards.
332-09
Adapter between SFC1000 and Rosemount 205.
332-10
Center portion of housing for SFC332/1000 enclosure.
332-11
Glass Dome Cover for SFC332/1000 Enclosure.
332-12
Blank Dome Cover for SFC332/1000 Enclosure.
332-13
O'ring for SFC332 Enclosure.
332-14
External I/O Expansion.
332-15
Battery Replacement for SFC332/1000.
332-16
1/2 Amp 250V Fuse for SFC332/1000.
332-17
EPROM for SFC332/1000 (set of two).
RS232
External RS232 Connection for all models.

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Quick Start —1-4
Date: 8/1/2019
Smart Flow Computer : Dimensions

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Quick Start —1-5
Date: 8/1/2019
Starting and Installing the Software:
First make sure your computer has the minimum requirements to install Dynamic’s Dynacom software.
System Minimum Requirements
In order to install this software product the following requirements must be met:
Windows Operating System (Win95, Win98, Win98SE, win2000, WinNT, WinXP, Vista,
Windows 7, Windows 8, Windows 10)
For Windows NT, 2000, XP or Vista: Administrator level access to create an ODBC system DNS.
Minimum disk space available: 16 MB.
1 Serial Communication Port
If your computer meets these requirements, you can run the setup file downloaded from our website