R230525
Your Dynarex Product is warrantied to be free of defects in
materials and workmanship for the lifetime of the product for
the original purchaser. This item was built to exacting
standards and carefully inspected prior to shipment. This
Limited Lifetime Warranty is an expression of our confidence
in the materials and workmanship of our products and our
assurance to the consumer of years of dependable service.
The Warranty shall not apply under the following conditions:
• Problems arising from normal wear
• Problems arising from failure to adhere to the product
instructions
• Problems arising from misuse, negligence, accident or
improper operation, maintenance or storage
• Problems arising from modifications or unauthorized
repairs, parts or attachments
• Products where the serial number has been removed
or defaced
• Problems with non-durable components, such as
rubber accessories, casters, and grips, which are
subject to normal wear and need periodic replacement
Dynarex shall not be liable for any consequential or
incidental damages whatsoever. Dynarex shall repair or
replace defective products at its option. The foregoing
warranty is exclusive and in lieu of other express warranties,
if any, including the implied warranties of merchantability and
fitness of a particular purpose. The remedy for any violation
of the implied warranty shall be limited to repair or
replacement of the defective product pursuant to the terms
contained herein.
If you have a question about your Dynarex device or this
warranty, please contact an authorized Dynarex dealer.
*This product meets or exceeds all federal safety and
environmental regulations.
SYMBOL GLOSSARY
For an explanation of symbols
used in Dynarex packaging, visit
dynarex.com/symbols.php
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
MOUNTING INSTRUCTIONS
1. Before installing the rails, the bed should be in the flat
position. The carton should include 2 bed rails as shown.
2. Unclip and remove the metal pins from the rail mounting
brackets. Hook the rail bracket onto the edge of the bed
decking. Align the rail bracket mounting holes with the bed
decking mounting holes.
3. Re-insert the metal pins through the mounting holes and
secure with the snap rings. Make sure the snap rings are
positioned in the groove of the metal pins. Repeat the same
procedure to install the other rail.
The rails can be positioned at the head or foot section.
RAIL OPERATION
RAISE BED RAIL: Pull the bed rail upwards until the rail is
securely locked in place.
LOWER BED RAIL: Squeeze the release lever at the bottom
corner of the bed rail and slowly lower the bed rail to its lowest
position.
LIMITED LIFETIME WARRANTY
Read the instructions carefully before installing.
Before operating, ensure that the bed rails are assembled
and installed correctly as instructed. Ensure that all the
attaching hardware are tightened and that the bed rails are
securely in place. Inspect the hardware frequently to make
sure all the components are tightened securely.
DO NOT use the bed rails as a handle for getting into or out
of the bed. This could result in personal injury and damage
to the bed rails.
DO NOT apply side pressure to the bed rails. This could
deform or even break the bed rails.
DO NOT use the bed rails as a push handle for moving the
bed. This could deform or even break the bed rails.
DO NOT use the bed rails if proper installation cannot be
achieved. Contact your dealer or manufacturer.
WARNINGS
