Dynascan DS0616 User manual

QUICK START GUIDE
Technology, Inc.
DS0613 / DS0616

UNIT OVERVIEW
Computer Panel
DS0616
33” dia x 88”h
0.83m x 2.23m
80”w x 62”h
2.00m x 1.60m
1, 2 or 3 screens
960 x 720
2.1mm x 2.2mm
750 nits
650 lb [300kg]
220V / 15A / 1 Phase
Model Number:
Physical Dimensions:
[in metric]:
Screen Size:
[in metric]:
Displays in:
Resolution: (Full Wrap)
Pixel Size:
Brightness:
Weight:
Power Requirement:
DS0613
33” dia x 78”h
0.83m x 1.97m
80”w x 50”h
2.00m x 1.30m
1, 2 or 3 screens
744 x 592
2.7mm x 2.2mm
750 nits
550 lb [250kg]
220V / 15A / 1 Phase

Power Cord
2Main Power On/Off Switch
External VGA Monitor Port
PS2 Port
USB Port (x2)
1Computer Power Switch
COMPUTER PANEL

GETTING POWER FOR THE UNIT
- Locate the end of the Power Cord
- There are 3 wires: Green = Ground
White = Phase 1
Black = Phase 2
- Once plug is installed, plug unit into 208/220VAC
- Plug mouse --> USB or PS2 port
- Plug keyboard --> USB or PS2 port
- Plug external VGA monitor --> External VGA port
(monitor is not mandatory but will help setting up easier)
- Turn the unit on by flipping the main power switch
- DynaScan content will then start up
STARTING UP THE UNIT
- Press and hold the 1 computer power switch for 5-10 seconds
- Now turn off the 2main power switch
TURNING OFF THE UNIT

- Click on desktop to open schedule editor
- Click to retrieve the content you wish to display
- Click to add content to schedule editor
- Click to save schedule in the same directory as the
content is in
1.1 HOW TO USE SCHEDULE EDITOR
- Repeat this step to loop one content with another
- Make as many schedules as you would like
- Make copies of the content if you wish to use the same content
to make multiple schedules
* Do NOT use the same content file more than once!
- One or more pieces of content should only be used for one schedule
TYPE OF VIDEO SIGNAL DYNASCAN RECOGNIZES
- DS0613 / DS0616 will recognize a video signal that is
1024 x 768 at a 60Hz refresh rate through a DVI-D interface
SAMPLE SOFTWARES (SCHEDULE EDITOR & DS PLAYER) ARE INCLUDED
PLEASE REFER TO SECTION 1 & 2

- Click on desktop to open DynaScan Player
- Double click on the player (black frame) to open dialogue box
- Under “Schedule”:
- DynaScan in one full wrap, single screen
- DynaScan in two screens with two different schedules
- DynaScan in three screens with three different schedules
- If you click on “One”, open the schedule file made
- If you click on “TWO”/“THREE”, click to display Wizard
- Choose between splitting the screen vertically or horizontally
- Click to add the schedule files into the frames
- Once you have the schedules loaded, click
- Click
- The schedules are up and running
* Using the MULTI SCREEN option could cause video lagging
2.1 HOW TO PLAY A SCHEDULE
2.2 HOW TO PLAY A SINGLE FILE
- Under “Single File”, click
- Load a MPG1, MPG2 or an AVI file
- Click and the file will start to play
- Double click on the player (black frame) to open dialogue box

2.3 HOW TO FORMAT CONTENT FOR THE DS PLAYER
DS0613 one-screen = 744w x 592h pixels
two-screen = 372w x 592h pixels
three-screen = 248w x 592h pixels
one-screen = 744w x 592h pixels
two-screen = 744w x 296h pixels
three-screen z 744w x 197h pixels
- DynaScan Player supports: AVI, MPG1, MPG2 and Flash
* May need to install some codec in order to support all formats
DS0616 one-screen = 960w x 720h pixels
two-screen = 480w x 720h pixels
three-screen = 320w x 720h pixels
one-screen = 960w x 720h pixels
two-screen = 960w x 360h pixels
three-screen = 960w x 240h pixels
2.4 HOW TO MAKE DYNASCAN SCREEN SPIN
- Under “Setting”, click to display Window Setting
- Adjust the spin speed under “Monitor System”
FIXED = screen does NOT spin
8 Sec = fastest spin speed
120 Sec = slowest spin speed
- Save and Exit
- Double click on the player (black frame) to open dialogue box
2 3
2 3
2 3
2 3

DynaScan Technology, Inc.
7 Chrysler, Irvine, CA 92618, USA
T. 949.421.0348 / F. 949.421.0353
E. [email protected]
www.dynascanusa.com