DynaVox T10 User manual

DynaVox T10 User’s Guide
DynaVox T10 User’s Guide
Copyright © 2013 DynaVox Systems LLC
All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transmitted in any form, by any means
(electronic, photocopying, recording, or otherwise) without the prior written permission of the publisher.
Copyright protection claimed includes all forms and matters of copyrightable material and information allowed by statutory or judicial
law or hereafter granted, including without limitation, material generated from the software programs which are displayed on the
screen such as screen displays, menus, etc.
Although every precaution has been taken in the preparation of this book, the publisher assumes no responsibility for errors or
omissions.
In North America:
For information, write to:
DynaVox Systems LLC
2100 Wharton Street, Suite 400
Pittsburgh, Pennsylvania 15203 USA
The European Authorized Representative is:DynaVox Systems Ltd.
Pure Offices Plato Close
Tachbrook Park
Leamington Spa
Warwickshire
United Kingdom
CV34 6WE
DynaVox® is a registered trademark of DynaVox Systems LLC.
DynaVoxT10™ is a registered trademark of DynaVox Systems LLC.
All other brand and product names mentioned are trademarks or registered trademarks of their respective holders.
First Edition
Published August 2013
Created in the United States of America

Caution 39
DynaVox T10 User’s Guide

DynaVox T10 User’s Guide 1
Introduction
The DynaVox®T10 is an integrated hardware and software solution for AAC, which features
the DynaVox Compass™ communication software.
This User’s Guide provides an overview of the basic operation of your T10. It points out key
hardware features, briefly explains how to customize the pages and their content, and
describes the most frequently-used features and functions of your T10.
Resources
This User’s Guide is only a brief, introductory reference for your T10. Many other resources
are available.
NOTE
On your T10, select the Settings button on the Toolbar to open the Settings menu. Then select
Help. A menu will open with links to myDynaVox.com to access documentation, Help Videos, and
the Knowledgebase.
myDynaVox
myDynaVox.com is your personal online storage and administration website that you can use
to manage the Compass software running on your T10. It is available to you from anywhere via
the web.
Go to www.myDynaVox.com to register for an account.
Your myDynaVox account integrates you with a community of clinicians, technical experts, and
your peers and provides you with a responsive community of help and support.
After you set up your account, you can access it from anywhere on the web to:
•Register your T10
•Upload, download, and share communication pages
•Receive software updates and new communication content
•Backup and restore user data
•Access implementation and therapy supports and tools
•View and participate in discussion forums
•Find technical support and documentation resources
•Search the Knowledgebase
•View help videos
•Manage your user profile

2
Additional Documentation
A Quick Start Guide was shipped with your DynaVox T10. This guide provides an overview of
your T10, walks you through setting up and personalizing your new T10, and setting up and
logging in to your myDynaVox.com account.
Technical Support
NOTE
Before you contact DynaVox Technical Support, write down the serial number of your T10. It can
befoundonthebottomedgeofyour device - or select theSettingsbuttonatthetop of the Toolbar.
Then select Help from the Settings menu, and select the About button.
My T10 serial number is:______________________________
Technical Support
United States & Canada
1-866-DYNAVOX (396-2869)
M - F, 8:00 a.m. - 6:00 p.m. (EST)
www.dynavoxtech.com
Your DynaVox Sales Consultant:
1-888-697-7332
If you are not a resident of North America, please call the dealer from whom you
purchased your device.

DynaVox T10 User’s Guide 3
Hardware Overview
2 31 4
5
76
5
Front:
Top:

4
8
9 9
Back:
Bottom:
10
11
12
13
14
9 9

DynaVox T10 User’s Guide 5
CAUTION
The LCD may show "image persistence" if the same image or page is displayed for four (4)
consecutivehours or longer.Thevisual artifactsmay ormay not be noticeable ordistracting. They
will not cause permanent damage to the LCD.
Front: 1Charging Indicator: Lit when the battery is charging. Turns off
when the battery is fully charged.
2 Power Button: To turn the T10 on, press and hold until the splash
screen appears. Press and release to put to sleep. To shut down the
T10, press and hold until the shutdown menu appears.
3Front-facing Camera: Takes photographs of people and objects in
view of the T10 screen - for example, self portraits.
4 Ambient Light Sensor: Adjusts the screen brightness based on
the surrounding light.
Top 5Speakers: Dual speakers provide an extensive range of volume.
6 Volume Rocker Switch: Press on the + side of the switch to
increase volume. Press on the - side of the switch to decrease
volume.
Right Side 7Speaker/Headphone/External Microphone Jack: Connect an
external speaker, headphones for private audio, or an external
microphone.
Back 8 Rear-facing Camera: Use for taking custom photos.
9Lanyard connections: Provide attachment points for the T10 strap.
Bottom 10 Charger Port: Plug in the adapter/charger to charge the battery.
11 Micro USB Port: Connect to a micro-USB to full-size USB cable
adaptor. (To connect to a PC.)
12 30-Pin Dock Connector: (for future use)
13 Micro HDMI Port: Connect an external monitor to your T10.
14 Microphone: Record custom sounds.

6
Charging the Battery
When the battery charge is low, the T10 will emit an audible beep. You should plug in your T10
and recharge the battery immediately.
1. Plug the charger into a wall outlet.
2. Connect the charger to the charger port on the device (Page 4, #10).
The charging indicator, (Page 3, #1) will illuminate while your T10 is charging. The
charging indicator will automatically turn off when it is fully charged.
3. After your T10 is fully charged, disconnect the charger.
You cannot overcharge the battery. It is fine to charge the battery overnight.
You can use the T10 while the battery is charging.
CAUTION
Because of internal chemical reactions, battery performance may deteriorate over time. In
addition, failure to keep the conditions of use (charge, discharge, ambient temperature, etc.)
withinspecifiedrangesmayshortenthebatterylifeexpectancy,ordamageyourT10.Ifthebattery
cannot maintain a charge for long periods of time, even when it is charged correctly, it may need
to be replaced.

DynaVox T10 User’s Guide 7
Temperature Ranges
For optimal device performance, the T10 should be kept within the following temperature
ranges:
NOTE
Run time will be shortened at the high and low ends of the temperature range.
Mounting/Transporting Your T10
If you use your T10 device while in a wheelchair, you should have it properly mounted for both
communication and transportation purposes. Wheelchair mounting systems are available
through DynaVox.
Protective and accessible carrying cases are also available. Consult the DynaVox website
(www.dynavoxtech.com) or your DynaVox sales consultant for more information.
Product Cleaning/Handling
To clean your T10, first turn it off and then wipe it gently with a damp cloth or soft paper towel.
You may dampen the towel with a mild window cleaner to remove fingerprints, food particles,
and dust.
Do not use tape or stickers on either the touch screen or the case, as they are difficult to
remove and may damage the device surface. Tape, stickers, and other sticky materials can
damage the touch screen and interfere with the operation of the device.
Be sure to avoid getting your T10 wet. Never submerge it in water (e.g., dishwasher). If your
unit accidentally gets wet, be sure to shut it down and allow it dry thoroughly. If after 24 hours
you find that the T10 seems to function normally, there is probably no damage. If it fails to
function or behaves abnormally, contact DynaVox Technical Support at 1-800-344-1778 for
instructions. You may need to ship it to DynaVox for repairs.
Be careful not to drop it. Such treatment is not recommended and can shorten the life of your
T10. Do not use a sharp object to make selections on the touch panel, as this can cause
damage. Use a special capacitive stylus.
CAUTION
Never, under any circumstances, disassemble your T10. Doing so for any reason will void the
warranty, and you will be responsible for the cost of any required repairs.
Activity Temperature Range
Using the T10 14°F - 113°F (-10°C - 45°C)
Charging the T10 battery 32°F - 113°F (0°C - 45°C)
Storing the T10 14°F - 113°F (-10°C - 45°C)

8
Turning the T10 On For The First Time
Press the Power button (p. 3 #2) to turn the T10 on. Select the DynaVox icon on your desktop.
DYNAVOX ICON ON DESKTOP
The Setup Wizard screen will open.
SETUP WIZARD SCREEN
The Setup Wizard will walk you through the steps to create a new user and choose an
appropriate page set and talk topics.
First, you will be asked a number of questions to help you choose an appropriate page set,
including your age range, gender, and a description of your condition. Next, you will be asked
for more information based on the page set that has been chosen.
When setup is complete, the Congratulations screen will open.

DynaVox T10 User’s Guide 9
CONGRATULATIONS SCREEN
From the Congratulations screen, you can:
•View orientation videos. (The Orientation tab will, by default, be open. Select the video
thumbnail to launch the orientation videos.)
•Select the myDynaVox tab for information on the myDynaVox.com website. (See
myDynaVox.)
•Select the Resources tab for a list of resources available on the myDynaVox.com website
to support your use of the Compass software.
When you have viewed the videos and learned about the myDynaVox.com website, select the
Start Communicating button. You are now ready to start communicating with your DynaVox
T10!

10
The Tool Bar
TOOLBAR (EXAMPLE)
The Toolbar is designed to give you quick access to your most-
used tools and page sets.
The appearance of the Toolbar may vary. It can be customized
and configured to your specifications - you can add or remove
buttons and folders, hide the Toolbar, and even move it from the
left side of the screen to the top, bottom, or left side of the screen.
(See Interface Settings.)
The Settings button at the top of the Toolbar (circled in the
illustration to the left) opens the Settings menu, which provides
you with easy access to the tools you need to customize the
Compass software. (See The Settings Menu below.)

DynaVox T10 User’s Guide 11
The Settings Menu
Select the Settings button on the Toolbar to open the Settings menu.
SETTINGS MENU
Simply select a button on the Settings menu to access the Page Browser or Page Creator,
Vocabulary, Interface and Toolbar settings, Voice Settings, Rate Enhancement components,
the camera and media library, access method settings, backup and restore functions, as well
as links to help documentation and videos.

12
Settings Menus
Page Browser
The Page Browser is the quickest way to open or edit a page. You can search for a page by
name, or look through the folders and see preview images of pages before opening them.
Select the Settings button at the top of the Toolbar, then select Page Browser from the
Settings menu.
PAGE BROWSER
The icons at the top right of the screen (circled in the illustration above) enable you to display
the pages and folders as a grid (default) or list.
Use the arrow button at the upper left of the screen (circled in the illustration above) to move
up through the layers of folders. Double-click on a folder to open it and display the pages
inside. Select a page, and a large thumbnail of the page will open.
SELECTED PAGE IN PAGE BROWSER
Simply select Open to open the selected page or Editor to edit the page.

DynaVox T10 User’s Guide 13
Page Creator
Create an entirely new page - either from a template or based on the layout of an existing
page. You can customize your new pages with your own content - vocabulary, symbols, media
files, etc.
Select the Settings button at thetop of the Toolbar, then select Page Creator from the Settings
menu.
PAGE CREATOR
The icons at the top right of the screen (circled in the illustration above) enable you to display
the pages and folders as a grid (default) or list.
Select from a number of templates (blank or by activity type or instructional area) or select the
Like Page tab to create a new page using the layout of an existing page. You can also use the
Search text field to find a page you would like to use as a template.
Use the arrow button at the upper left of the screen (circled in the illustration above) to move
up through the layers of folders. Select a folder to open it and display the pages inside. Select
a page, and then select Create at the top right corner of the screen. A dialog will open - name
the page and browse for a location for it. You can then edit the page to your exact
specifications.

14
Vocabulary
Your vocabulary (your talk topic choices, word list, and phrases) was selected when you used
the Setup Wizard to set up your user account and is based on your input regarding your age,
gender, condition, and communication level.
Most vocabulary items are stored in folders. You can edit, copy, delete, change the order of
appearance onscreen, and add new vocabulary items using the Vocabulary menu.
Select the Settings button at the top of the Toolbar, then select Vocabulary from the Settings
menu.
VOCABULARY MENU
Select the Word Lists, My Phrases, or Topics button to open the Vocabulary screen.
VOCABULARY SCREEN - WORD LISTS (EXAMPLE)
Navigate through the folders (use the arrow button at the upper left of the screen - circled in
the illustration above) - to move up through the layers of folders. Select a folder to open it.
When you find the folder or item you wish to edit, select Manage at the top right corner of the
screen.

DynaVox T10 User’s Guide 15
NOTE
If you are adding a new folder or item, navigate to the level to which you want to add the folder or
item, then select Manage.
EDIT VOCABULARY SCREEN
When you select the Manage button, a button bar will open.
BUTTON BAR ON VOCABULARY SCREEN
Select the item you want to modify. Then select the applicable button on the button bar.
•Edit - The Vocabulary Properties menu will open.
VOCABULARY PROPERTIES MENU
Enter a new label, browse for a symbol, and add or change the message.

16
NOTE
The Message field will not be present when you are editing a folder.
•Copy To - The Select a Folder screen will open. Navigate through the levels to find the
destination folder.
•Order - Use the First, left arrow, right arrow, or Last buttons at the top of the screen to
reorder the selected item.
•New Folder - Create a new folder.
•New Item - Create a new item.
•Delete item - Select the trash can icon .