Dynex DX-PU965XF User manual
Quick Setup Guide
USB Transfer Cable IDX-PU965XF
Launching the Software on Mac Computers
(GO!Bridge Software)
1 Connect the USB cable from one computer to the other. The
software detects the connection.
2 Click the EasySuite disc icon on the desktop of your Mac. If the
EasySuite CD icon is not on your desktop, launch Finder and select
the EasySuite CD from the list of drives and folders on the left.
3Click the Go!Bridge software icon to launch the Mac version of the
software.
Note: "Bridge is not running" will be displayed if GO!Bridge (for Mac OS) or
EasySuite (for Windows OS) is not open on both computers.
Getting Started
Follow the steps below to launch the software on each Windows or
Mac computer that you are connecting. For instance, if you connect a
PC to a Mac, follow the PC setup steps on your PC and the Mac setup
steps on your Mac.
Launching the Software on Windows PCs
(EasySuite Software)
• Connect the USB cable from one computer to the other. The
software detects the connection.
• Windows XP and Windows 2000: The EasySuite software
opens.
If it does not open, open My Computer, select the drive letter of
the EasySuite cable/software and double-click the EasySuite icon.
• Windows 8, Windows 7, and Windows Vista: The Autoplay
menu opens. Click Run EasySuite.exe, then click Yes to allow
the program to make changes. If Autoplay does not open, open
My Computer, select the drive letter of the EasySuite
cable/software and double-click the EasySuite icon.
Package contents
• Universal transfer cable
• Quick Setup Guide
Features
• High-speed data transfer
• Windows-to-Windows compatibility
• Mac-to-Mac compatibility
• Windows-to-Mac (and Mac-to-Windows) compatibility
• Auto-launching software built into the cable; no CDs or
downloads required
System requirements
• Windows® 8 (not including Windows RT), Windows® 7,
Windows Vista®, Windows® XP, or Windows® 2000 SP3
• Mac OS X v10.5 or later
• Intel® Pentium® II or higher/PowerPC G4 processor or later
• 512 MB RAM or higher
• At least 100 MB hard drive space available
• Available USB port on both computers
Before using your new product, please read these instructions to prevent any damage.
Transferring Files Between Computers
When the EasySuite or GO!Bridge software opens, there will be two
windows, Local Host and Remote Host. Local Host is the computer you
are currently using. Remote Host is the computer you are connected to
via the cable. Both the EasySuite Software and GO!Bridge software
allow you to transfer les using the same techniques.
There are two ways to transfer les with EasySuite or GO!Bridge:
• Option 1: Select the le to be transferred on either the local or
remote computer, then drag and drop it into the destination directly.
OR
• Option 2: You can Copy and Paste the les to be transferred by
selecting the les using Ctrl+C, then pasting the les in the
destination folder using Ctrl+V, or by using the same commands
on the Edit menu.
Note: If you get an error message on your Mac system stating that you can
not write les to a specic folder, then choose another folder that does not
have user restrictions. Or you may consult your operating system
documentation on how to modify write permissions on a certain folder.
Troubleshooting
Visit www.dynexproducts.com for details.
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, maybe cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit dierent form
that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help
Transferring multiple les using the Dock
You can collect les on the Dock in GO! Bridge, then drag them all to
the destination at once instead of transferring a single le.
To display les in the Dock, click the Dock icon.
Canadian Notice
CAN ICES-3 (B)/NMB-3 (B)
One-year limited warranty
For complete warranty, visit www.dynexproducts.com.
Contact Dynex
For customer service, call 1-800-305-2204 (U.S. and Canada) or
01-800-926-3020 (Mexico)
www.dynexproducts.com
V1 ENGLISH 14-1001
Dock icon
DYNEX is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
Other Dynex Cables And Connectors manuals
