
4Use tab #1 to peel the back lm o of the
screen protector, then discard the lm.
Note: Make sure not to touch the adhesive
side of the lm during the installation process.
5Align the top of the screen protector with
the top of the iPad, then press it down from
top to bottom to adhere.
6If there are bubbles, press them out toward
the edges of the screen protector using the
scratch card.
7Use tab #2 to peel the blue lm o of the
screen protector, then discard the lm.
8Reattach your iPad case (if needed), then
remove ngerprints with the polishing cloth.
90-day limited warranty:
Visit www.dynexproducts.com for details.
Contact Dynex:
For customer service, call 1-800-305-2204 (U.S.
and Canada) or 01-800-926-3020 (Mexico)
www.dynexproducts.com
DYNEX is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 18-0432
Tab #1
Scratch card
Screen protector
Dynex Flexible Screen Protector_18-0432_QSG_V1_EN.ai 2 8/1/2018 2:55:21 PMDynex Flexible Screen Protector_18-0432_QSG_V1_EN.ai 2 8/1/2018 2:55:21 PM