Dyson DC14 Telescope Reach User manual

User Guide
Please read this guide carefully before using your DC14
H AFRICA OPS MANUAL
x (H)297 mm LANDSCAPE
OD FREE
FIRMED
CA
OMALIN AT 100% OF FINAL SIZE
LSION DOWN POSITIVES @100% FINAL SIZE
OGRAPHY
NT SPEC

Box contents
2
• Please see the back of the manual for
optional accessories.
• If you have any questions, please call
the Dyson helpline (details on back
page) or log onto www.dyson.com
Important information
Hose
Wand release
On/off switch
Cyclone release catch
and bin emptying trigger
Stair tool
Airway inspection valve
Valve release clips
Soleplate
Shroud
Brush tool Crevice tool
Wand cap
Upper cable winder
Lower cable winder
U bend release clip
Airway inspection (u bend)
Wand
Brushbar on/off
(brush control models only)
Hose release
Optional: Mini
turbine head
Filter release catch
Optional: Low
reach floor tool

Assembling your Dyson
vacuum cleaner
3
• Ensure the wand cap is closed.
• Ensure hose is kept straight when
inserting wand into hose.
ASlide hose into runners at back
of machine and click into place.
BSlide wand straight down in to
hose until it clicks into place.
Click wand handle into top
of machine.
Click tools into place. Wind cable anti-clockwise around
cable winders and secure with clip.
Important information
Brush tool
Crevice tool
Stair tool
B
A

Using your Dyson
vacuum cleaner
4
•Do not press the cyclone release
catch whilst carrying the machine or
it could fall and cause injury.
• Ensure the cyclone is secured to the
machine.
• Do not shake the machine
whilst carrying or it could fall and
cause injury.
• Keep hair and loose fabrics away
from wand cap when machine is on.
Anti-jam brushbar
(models with brush control)
DC14 models without brush control
are not suitable for hard floors, as
the brushbar cannot be turned off.
We recommend brush control
models for homes with mixed
flooring.
Ensure the machine is fully upright
before adjusting the setting.
For hard floors
For carpets
Plug in and press on/off button.
Push cleaner head down with foot
and pull handle towards you.
Telescope ReachTM Wand
ALift up wand cap.
BPull metal wand from inside
handle until it clicks.
Carrying your Dyson
Ensure machine is upright before
carrying. Use the carry handle at
the top of the cyclone to lift.
CPress button to release hose and
wand handle from machine.
DTo push wand back inside hose,
ensure hose is straight. Press the
release catch and push wand
back inside wand handle.
Important information
• The machine is intended for
domestic use only.
• Fine dust such as plaster dust
should only be vacuumed in very
small amounts.
A
B D
C
1
1

Using your Dyson
vacuum cleaner
5
• Ensure machine is in upright
position before using tools.
• Ensure hair and loose clothing are
kept clear of wand cap when
machine is switched on.
• Ensure wand cap is closed, unless
using with tools.
• Powerful suction can cause the
hose to ‘pull back’. Please take
care when cleaning stairs.
Hose mode
BWith wand extended, press side
buttons to remove wand handle
from the hose.
CThe tools can be fitted directly to
the end of the hose.
Stair cleaning
Always work with the machine at
the bottom of the stairs.
Important information
C
Wand mode
ATools can be fitted directly to
the end of the wand for
hard-to-reach places.
A
B

Emptying the clear binTM
6
• Turn power off and unplug before
emptying the bin.
• Do not use the machine without
the clear binTM in place.
Empty bin as soon as the MAX
mark is reached. Press catch to
release cyclone and bin from the
machine.
Option 1
Push the button as shown to empty
directly into dustbin.
Option 2
Emptying into bag is
recommended for allergy sufferers.
Place bin in bag and push button.
Let the dust settle and close bin
base securely before removing
from bag and refitting bin on
machine.
Important information
The British Allergy Foundation
considers that this product may in
proper use reduce exposure to
both House Dust Mite (Der p 1)
and Cat Allergen (Fel d 1). It is strongly recommended
that a sensitive person should take care when emptying
the clear bin. We recommend the manufacturer's
emptying instructions should be strictly followed.
The British Allergy Foundation is a UK national charity
(Charity Reg. No. 1003726) founded in 1991 with the
aim of improving awareness, prevention and treatment
of allergies.

Cleaning the clear binTM
7
• Do not use detergents,
polishes or freshening
products.
• Do not immerse the cleaner
in water.
• Ensure the bin is completely dry
before refitting.
Cleaning the shroud (optional)
Ensure bin is empty and bin base is
open. Press catch A to release the
clear bin from the cyclone.
Clean shroud with a cloth or dry
brush to remove fluff.
Cleaning the clear binTM (optional)
• Ensure bin is empty and bin base
is open.
• Rinse with cold water only.
• Ensure bin is dry before replacing.
Re-assembling the clear binTM
AHolding carry handle, fit cyclone
assembly inside the bin.
BLine up the front and rear guides
and push down to secure.
Important information
A
A
B

Washing the filter at
least every 6 months
8
• Turn power off and
unplug before emptying the bin
Check your filter regularly and
wash at least every six months.
The filter may require more
frequent washing if vacuuming
fine dust.
Do not use the machine without
the filter in place.
Do not use detergent.
Do not put the filter in the
dishwasher, washing machine,
oven, tumble dryer, microwave or
near a naked flame.
Remove cyclone from machine. Press
catch Ato release cyclone pack.
Accessing the filter
Lift filter release catch Band
remove filter from machine.
BWash filter and case in cold
water only. Repeat until water
runs clear.
CDry for at least 12 hours or
overnight. Ensure filter is
completely dry before refitting
onto the machine.
Important information
A
B
C
Washing the filter
ASeparate blue filter and yellow case.
• Wash filter and case in cold water only.
• Only wash blue foam and yellow case.
• Do not use detergent.
• Do not put the filter assembly in the
dishwasher, washing machine, oven,
tumble dryer, microwave or near a
naked flame.
A
B

Finding blockages
9
• Turn power off and unplug
before checking for blockages.
• If any part of the machine
becomes blocked, it may
automatically shut off. Unplug
machine and clear blockage
before restarting.
Please note: Clearing blockages
is not covered by your
machine’s guarantee. (Keep
your proof of purchase safe.)
Beware of sharp objects when
clearing blockages.
Refit all parts of the machine
securely before using it.
On models with brush control, a
ratchet noise warns that the
brushbar is obstructed. Ensure
machine is disconnected from
the power supply before
clearing the obstruction.
ACheck tools, wand and hose are
clear of blockages.
BTo remove the hose, press hose
release button at front of machine
and slide hose out.
U bend inspection
CTilt machine forward, slide out
U bend and check inside
for blockages.
Airway inspection valve
DSqueeze release catches and
check inside for blockages.
Brushbar obstructions
Remove wand and cyclone assembly
and turn machine upside down.
Undo fasteners using a coin and
remove soleplate.
Remove fluff and hair from brushbar.
Rest the 3 tabs on inside of yellow
bumper and replace soleplate,
tightening the fasteners.
Ensure soleplate is in correct position
before use.
Important information
B
A
D
C

Changing/fitting the belt
(machines without brush control)
10
• Turn power off, unplug machine
and allow machine to cool for
1 hour before changing/fitting
belt.
• Ensure soleplate is in correct
position before use.
Remove wand and cyclone assembly
and turn machine upside down.
AUndo fasteners using a coin and
remove soleplate.
B Remove fluff and hair from
brushbar and check metal
spindle is clean.
C To replace the belt, remove the
brushbar, loop belt around
brushbar and feed through
hole. Using back of cleaner as a
lever, loop belt around thumb.
Turn the belt 90 degrees, stretch
and release over spindle. Belt
must be free of twists as shown.
D Replace the brushbar and check
end caps are secure. Rotate the
brushbar to centralise belt.
ERest the 3 tabs on inside of
yellow bumper and replace
soleplate, tightening the
fasteners.
FEnsure soleplate is in correct
position before use.
Important information
A
B
C
D
E
F