Dyzle Y-Tag Thermocouple 2.0 User manual

!
!
Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: [phone], Fax: [phone]
© 2015 Dyzle User Manual for Y-Tag Thermocouple 2.0, version 1.3, May 2015!1
User Manual for:
Y-Tag Thermocouple 2.0
Product code 020 1301 002
Version 1.3, June 2015
© 2015 Dyzle

!
!
Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: [phone], Fax: [phone]
© 2015 Dyzle User Manual for Y-Tag Thermocouple 2.0, version 1.3, May 2015!2
Foreword
This User Manual is intended for users and installers of the Y-Tag Thermocouple 2.0. Read the User
Manual thoroughly before proceeding to install or use the Y-Tag Thermocouple 2.0. This product is
delivered exclusively to businesses and may only be installed and operated by installers who have
been trained by Dyzle.
This User Manual makes reference to the Dyzle Hardware Installation Manual. This document
provides information on the installation and maintenance of the Y-Tag. The Dyzle Portal 2 User
Manual describes how to use the online Portal. You can manage your settings and view the data that
is submitted by the sensors and Y-Gates in the Portal. Contact your supplier's support department to
obtain a copy of the latest version of the Manuals.
Table of Contents
Foreword ..............................................................................................................................!2
General description of the Dyzle solution ............................................................................ !2
General description of the Y-Tag Thermocouple 2.0 ..............................................................!3
Product specifications ...........................................................................................................!3
Safety ....................................................................................................................................!3
Placement and installation ....................................................................................................!3
Making the device operational and resetting it ......................................................................!3
Maintenance and battery replacement ..................................................................................!4
Warranty ................................................................................................................................!4
Declaration of conformity .......................................................................................................!4
Disposal ................................................................................................................................. 4
General description of the Dyzle solution
The Y-Tag Thermocouple 2.0 is part of the Dyzle solution. The solution consists of a personal
dashboard (online Portal) and the necessary hardware. The hardware will take and send
measurements to Dyzle in the form of data packages, which can contain information such as:
•temperature measurements;
•door monitoring (door open / closed);
•humidity (% RH);
•electricity consumption;
•location (GPS; only for a mobile location);
•CO2.
The hardware consists of sensors (Y-Tags) and a base station (Y-Gate) that communicate wirelessly
with one another. The components contain electronics that are powered by an adapter, the vehicle's
battery, or a battery-pack. The components are NOT waterproof, unless specified otherwise, and must
therefore be protected from water and other liquids. Other than the wiring and sensors, which are
designed for high-temperature applications and are explicitly specified as such, the hardware itself
should NOT be exposed to temperatures above 50°C.
Dyzle sensors can be used for measuring temperatures in cold rooms, freezers, refrigerators,
refrigerated displays, and promotional displays. Both air- and product-temperature are measurable
and are therefore distinguished from one another. Outfitting a delivery truck or van, which contain food
or pharmaceutical products, with the hardware allows for continuous recording of position and / or
temperature of the conditioned space.
The Dyzle solution is designed to address the needs of customers in the food, pharmaceutical / care
and transport industries in terms of:
•Automated temperature registration (24/7);
•Notification service in the event of a temperature exceedance by email, premium SMS or
IVR*;
•Automated HACCP / QA reports.
* For Interactive Voice Response (IVR): ask the support department about the possibilities.

!
!
Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: [phone], Fax: [phone]
© 2015 Dyzle User Manual for Y-Tag Thermocouple 2.0, version 1.3, May 2015!3
General description of the Y-Tag Thermocouple 2.0
The Y-Tag Thermocouple 2.0 is used to integrate temperature measurements taken by a
thermocouple K-Type into the Dyzle solution. The thermocouple is connected to this Y-Tag via a
thermocouple interface, this is a adapter to connect the Y-Tag to the K-Type thermocouple. The Y-Tag
Thermocouple sends the temperature samples to the Y-Gate using the wireless connection. The Y-
Tag operates in combination with a base station (Y-Gate).
Product specifications*
Product code
020 1301 002
Measuring range
-20˚C to 1000˚C
Accuracy
Depends on the coupled sensor
Resolution
0.25˚C
Measurement interval
5 minutes
Memory
± 25 days (data backup when the connection to the Y-Gate is lost)
Connectivity to Y-Gate
WIFID, 2.4 GHz (coded)
Connectivity range
100 m (unobstructed)
Power supply
3.6 V DC (lithium battery)
Battery life (guaranteed)
1 year (room temperature)
Operating temperature
-25 °C to +50 °C
Water resistance
IP44 (Splash proof)
* Refer to the separate product specifications overview for the comprehensive product features.
Safety
Installation of the Y-Tag Thermocouple 2.0 requires general knowledge of safe work practices,
therefore may only be carried out by personnel holding the required operational Safety Certificate, and
should also have the necessary knowledge of the spaces, equipment and vehicles that will be
measured for temperature as well as the location where the system is to be installed.
Placement and installation
Consult the Dyzle Hardware Installation Manual before proceeding to install the Y-Tag and it’s
interface.
Making the device operational and resetting it
A new Y-Tag must first be made operational:
•By pressing the reset button twice: first press and release, then press and hold until the LED
lights up;
•When the Y-Tag has established a connection with the Y-Gate, the Y-Tag will flash every 3
seconds. This may take several minutes;
•If the Y-Tag fails to establish a connection, try to reset it.
You reset the Y-Tag by pressing the reset button once. The Y-Tag will now blink rapidly as it tries to
establish a connection with the Y-Gate.

!
!
Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: [phone], Fax: [phone]
© 2015 Dyzle User Manual for Y-Tag Thermocouple 2.0, version 1.3, May 2015!4
Maintenance and battery replacement
The exterior of the Y-Tag can be cleaned using a soft, damp cloth. Do not use any detergents. We
recommend that you replace the battery annually.
The battery may not be thrown out with household trash, but should be disposed of as hazardous
(chemical) household waste. The battery should only be replaced by an authorised technician. Consult
Part 4 of the Dyzle Hardware Installation Manual for instructions.
Warranty
Refer to Dyzle’s General Terms and Conditions of Sale and Delivery for our warranty terms. Contact
your supplier before returning the item in case of a warranty claim.
Declaration of conformity - FCC
This device complies with part 15 of the FCC Rules. The following conditions apply for use of this
device: 1) This device may not cause any harmful interference and 2) this device must accept
incoming interference, including interference that could possibly cause an undesired effect.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment shall be installed and operated with a minimum distance of 20cm between the radiator
and the human body.
Declaration of conformity for the European Union
Dyzle herewith declares that this wireless device complies with the essential requirements and other
relevant provisions of the R&TTE Directive 1999/5/CE.
Tests indicate that this product complies with the EMC Directive.
Disposal
This product was manufactured using high-quality materials and components, which can be reused
and recycled.
Batteries may not be thrown out with household trash. You are required by law to return used
batteries to your dealer or to deposit them in the designated containers in accordance with the
national or local stipulations, to guarantee environmentally compatible disposal.
This product may not be thrown out with household trash. The user is obliged to return the
device to an accredited organisation for the disposal of discarded electrical and electronic
equipment, to guarantee environmentally compatible disposal.