E-Image MT-800 User manual

MT-800 Advanced UHF plug-on transmitter
POWER SUPPLY SYSTEM
1. Battery box: Built in 2*AAtype metal hydride
rechargeable battery or high-performance alkaline
2. USB port: Connect to USB portable power. If the
metal hydride battery is loaded, the battery car be
charged

MORE DETAILS
+48V phantom power indicator light
When the system set to power supply for the connected
microphone, the indicator light is bright.
Audio frequency input jack(XLR-PIN)
Connect to the line output of the microphone or mixer
or other audio system.
External rotation screw
Lock or unlock XLR socket interconnect.
MUTE indicator light
When the power supply is turn on press the power button
quickly(0.3S), that is set to MUTE state, illumine MUTE
indicator light, press the power button quickly again,
(0. 3S)that is unlock mute state, MUTE indicator light is
closed, sound output normally.
ACT/IR function receiver
With the infrared of the receiver to the frequency information,
the setting device frequency will be corresponding
automatically.
LCD
Display functions, please read the instructions of every buttons.
SET button
Down button
Up button
Power / Mute switch button
Long press 1S, is the power switch operation.
Short press 0.3S is mute switch operation.
LAMP-SW light
Touch press start button
USB port
Connect to USB portable power.if the metal hydride
battery is loaded, the battery car be charged.
USB Charge cable

Housing
Frequency Range
Receiver
Adapter
Transmitter power
Harmonic radiation
Antenna
Oscillation Mode
LCD Display
Compact magnesium alloy
UHF480-960MHz (According to national radio regulations)
MR-100 (signal receiver) / MR-300 (dual reliever)
XLR socket with fixed screw ring
5mW/10mW switchable (country dependent)
≤-60dBc
External wired microphone or condenser microphone
PLL Synthesized, frequency stability ≤±0.005%(-10°C~60°C)
LCD with backlight, Group. Channel, Frequency.,AF gain, volume, RF power, Mute
mode, Stock of battery, Mute switch setting, phantom voltage, Lock status, prompt
message and other functions
Input sensitivity
Phantom power voltage
Mic Input
-40dB. -30dB. -20dB. -10dB. 0dB. five setting, 0 dB = microphone sensitivity
0V/ 12 V/ 48 V switchable, load current up to 10MA
Balanced XLR
Current Consumption
Operating Time
230mA (Phantom power opens up70mA) /160mA(Phantom powerclose)
>10h (phantom power off: 0V) , >6h (phantom power on 12Vor48V)
Battery
Dimensions (W x H x D)
Weight
2* AA 15Vg High-performance alkaline batteries
44x44x110mm
130g ( excluding battery )
Accessory
Optional Components
USB Charge cable 1pcs.2*AA(LR6)alkaline batteries
2* AA 1.2V 1800mA Nickel hydride rechargeable battery
Charging power supply Input: AC90-230V, Output: DC 5V-1200mA USB plug
SPECIFICATIONS
USAGE SCENARIO