Woxcon TPUH406TH-US User manual

TPUH406TH-US
4K Wallplate HDBaseT Transmitter
All Rights Reserved
Version: TPUH406TH-US_2018V1.2
User Manual

4K Wallplate HDBaseT Transmitter
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only, different models and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version is updated till September 15, 2017. In the constant
effort to improve our product, we reserve the right to make functions or parameters
changes without notice or obligation. Please refer to the dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

4K Wallplate HDBaseT Transmitter
SAFETY PRECAUTIONS
To i n s u r e t h e be s t f ro m t he pr od u c t , pl ea s e re ad al l instructions car e f u l l y be f o r e us i ng
the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prev e n t f i re o r s ho c k ha z a r d, d o n o t e xp o s e th e un i t to r ai n, m oi st ur e or i ns ta ll
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

4K Wallplate HDBaseT Transmitter
Contents
1. Introduction .................................................................................................................. 1
1.1 Introduction to TPUH406TH-US ......................................................................... 1
1.2 Features ............................................................................................................. 1
1.3 Package List ....................................................................................................... 2
2. Specification ................................................................................................................ 3
3. Panel Description ........................................................................................................ 4
3.1 Front Panel ......................................................................................................... 4
3.2 Rear Panel ......................................................................................................... 5
4. System Connection ..................................................................................................... 6
5. Button Control .............................................................................................................. 8
6. RS232 Control ............................................................................................................. 8
6.1 RS232 Control Connection ................................................................................. 8
6.2 RS232 Control Software ..................................................................................... 9
6.3 RS232 Command ............................................................................................. 11
6.3.1 Control Mode Switching ......................................................................... 11
6.3.2 Signal Switching ..................................................................................... 11
6.3.3 HDCP Compliance ................................................................................. 11
6.3.4 EDID Configuration ................................................................................ 12
6.3.5 System Setting ....................................................................................... 12
7. Panel Drawing ........................................................................................................... 13
8. Troubleshooting & Maintenance ................................................................................ 14
9. Customer Service ...................................................................................................... 15

4K Wallplate HDBaseT Transmitter
1
1. Introduction
1.1 Introduction to TPUH406TH-US
The TPUH406TH-US is 2x1 wallplate HDBaseT Transmitter for switching and
extending HDMI input to display or projector, and the transmission distance is up to
40m@4K and 70m@1080p over a single Cat5e/6/7 cable based on Certified HDBaseT
technology. The resolution of HDMI input is up to 4K/UHD@ 60Hz 4:2:0.
The TPUH406TH-US is ideal for huddle rooms, classrooms and small conference
rooms. The wallmountable design provides the convenience of placing input
connections precisely where they are needed.
1.2 Features
l Features two HDMI inputs.
l Supports HDMI signal up to 4K@60Hz 4:2:0.
l Ensures display of content-protected media and interoperability with other HDCP
compliant devices.
l HDBaseT technology extend HDMI and control signals up to 70m over CATx
cable.
l Automatically detects active inputs when sources are connected.
l Flexible control options for compatibility with third-party system, matrix switcher or
receiver.
l Supports bi-directional RS232 pass-through with HDBaseT connection and local
control.
l PoH (power over HDBaseT) allows powering from the receiver at the display end.
l Provides power supply for devices like WP8 Control Panel.

4K Wallplate HDBaseT Transmitter
2
1.3 Package List
l 1 x TPUH406TH-US 4K Wallplate HDBaseT Transmitter
l 4 x Mounting Screws
l 1 x 2-pin Pluggable Terminal Block
l 1 x 4-pin Pluggable Terminal Block
l 1 x User Manual
Note  Please contact your distributor immediately if you found any damage or defect in
the components.

4K Wallplate HDBaseT Transmitter
3
2. Specification
Input & Output
Input
(2) HDMI; (1) 12V POWER
Input Connector
(2) 19-pin Type A female HDMI;
(1) 2-pin Pluggable Terminal Block
Output
(1) HDBaseT; (1) 12V POWER
Output Connector
(1) RJ45; (1) 2-pin Pluggable Terminal Block
Transmission Mode
HDBaseT
Control Part
Control Ports
(1) FIRMWARE; (1) RS232
Control Connector
(1) Micro USB; (1) 3-pin Pluggable Terminal Block
General
Video Resolution
Up to 4Kx 2K@60Hz 4:2:0
Transmission Distance
1080p ≤ 70M; 4Kx2K ≤ 40M
Bandwidth
10.2Gbps
HDMI Standard
Supports HDMI1.4 and HDCP complaint
External Power Supply
Input:100V~240V AC; Output: 12V DC 2A
Max Consumption
9.6W
Operation Temperature
0 ~ +40
Storage Temperature
-10 ~ +55
Relative Humidity
10% ~ 90%
Dimension (W*H*D)
104.5mm x 89.0mm x 44.0mm
Net Weight
About 230g

4K Wallplate HDBaseT Transmitter
4
3. Panel Description
3.1 Front Panel
No.
Name
Description

POWER
LED indicator glows red when power is applied.

LINK
LED indicator glows green when an HDBaseT link is
established.

HDCP
LED indicator glows green when an HDCP link is
established.

RESET
Press this button to reboot the transmitter.

SOURCE/AUTO
Button switches sources.
Upon push and hold changes mode between auto and
manual source select. LED indicator glows green in auto
mode.

HDMI 1 & HDMI
IN 1
l HDMI 1 - LED indicator glows when HDMI input 1 is
active, amber when a source is available, and does
not light when there is no source connected.
l HDMI IN 1 – HDMI connector with locking feature.

HDMI 2 & HDMI
IN 2
l HDMI 2 - LED indicator glows when HDMI input 2 is
active, amber when a source is available, and does
not light when there is no source connected.
l HDMI IN 2 – HDMI connector with locking feature.

FIRMWARE
Micro-USB connector is used to update firmware.
LINK
RESET
FIRMWARE
SOURCE/AUTO
HD MI IN 1
POWER
HD MI 1 HD MI 2
HD MI IN 2
123
8
5
7
4
6

4K Wallplate HDBaseT Transmitter
5
3.2 Rear Panel
No.
Name
Description

HDBT OUT
HDBaseT output, connecting with HDBaseT Receiver over a
single Category cable to deliver AV signals, also supports
PoC.

IN
12V input, connecting with power adapter.

OUT
12V output, connecting with Control Panel to energize it.

RS232
Serial port for control TPUH406T-US and the third-party
device via RS232 commands. Please refer to the 6. RS232
Control for more details.
12 V Tx R x
OUT
RS232
HD BT O UT
1
2
3
4

4K Wallplate HDBaseT Transmitter
6
4. System Connection
Usage Precaution
l Verify all components and accessories included before installation.
l System should be installed in a clean environment with proper temperature and
humidity.
l All of the power switches, plugs, sockets and power cords should be insulated and
safe.
l All devices should be connected before power on.
Overview:
LINK
RESET
FIRMWARE
SOURCE/AUTO
HDMI IN 1
POWER
HDMI 1 HDMI 2
HDMI IN 2
Laptop
Blu-Ray DVD
Cat 5e/6A
Cat 5e/6A
Tx Rx
HDMI OUTHDBT IN RS232IR IN IR OUT
PoC
HDBaeT Receiver
Wallplate HDBaeT Transmitter
Projector/Flat Screen Display
HDMI:
VGA:
HDBaseT:
Audio:

4K Wallplate HDBaseT Transmitter
7
Installation
①
If installing in a back-box, it is recommended that the transmitter be installed in a
4-5/8” square box as a minimum. The 4-5/8” square box has sufficient space to
terminate the cables with jacks behind the unit when fully installed.
②
Run one twisted pair cable from the transmitter location to the site where the
HDBaseT Receiver will be located (somewhere near the display device).See the
installation instructions for the 70M HDBaseT Receiver.
③
If using the Control Panel, please run another twisted pair cable from the
transmitter location to the location that the Control Panel will be mounted.
④
All twisted pair cables should be terminated with jacks. This allows the permanent
link between the two devices to be tested.
⑤
Use the appropriate category rated patch cable to connect the HDBaseT link to
the HDBT OUT connector.
⑥
If using the Control Panel, use the supplied adapter cable to connect with the
second cable and follow the installation instructions for the HDBaseT Receiver
and Control Panel.
Note: Category 6A cabling with alien crosstalk prevention technology is recommended
to be used for ensuring the performance of HDBaseT link.

4K Wallplate HDBaseT Transmitter
8
5. Button Control
SOURCE/AUTO Button
Press and hold the SOURCE/AUTO button for approximately 3 seconds. When the
button lights up green the transmitter is in AUTO mode. This mode automatically
selects the last video source connected to the transmitter and outputs it to the display. If
press and hold again for approximately 3 seconds, the light will go out, and the device
will be in Manual mode which will allow the user to momentarily press the button to
toggle between the two HDMI sources.
6. RS232 Control
6.1 RS232 Control Connection
There are two RS232 control modes switching via sending 50779% or 50780%.
①
Control this transmitter and far-end third-party device (such as projector) device
by local PC, and the connection diagram shown as below:
Projector/Flat Screen Display
Tx Rx
HDMI OU THDBT IN RS232IR IN IR OUT
PoC
HDBaeT Receiver
12V Tx Rx
OUT
RS232
HD BT OUT
PC
Cat 5e/6A
Cat 5e/6A
Wallplate HDBaeT Transmitter
HDBaseT:
RS232:

4K Wallplate HDBaseT Transmitter
9
②
Control the transmitter by remote PC which is connected with Receiver.
The RS232 control mode can be chosen via RS232 commands, please refer to the
6.3.1 RS232 mode switching for more details.
6.2 RS232 Control Software
l Installation: Copy the control software file to the control PC.
l Uninstallation: Delete all the control software files in corresponding file path.
Basic Settings:
First, connect the transmitter with all input devices and output devices needed; then to
connect it with a computer which is installed with RS232 control software. Double-click
the software icon to run this software.
12 V Tx R x
OUT
RS232
HD BT OU T
PC
Tx Rx
HDMI OUTHDBT IN RS232IR IN IR OUT
PoC
HDBaeT Receiver
Cat 5 e/6A
Cat 5 e/6A
Wallplate HDBaeT Transmitter
HDBaseT:
RS232:

4K Wallplate HDBaseT Transmitter
10
Here we take the software CommWatch.exe as example. The icon is showed as
below:
The interface of the control software is showed as below:
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, and then you are able to send command in Command Sending Area.
Parameter Configuration area
Monitoring area, indicates if
the command sent works.
Command Sending area

4K Wallplate HDBaseT Transmitter
11
6.3 RS232 Command
Communication protocol: RS232 Communication Protocol
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
6.3.1 Control Mode Switching
Command
Description
Feedback Example
50779%
Switch to RS232 mode 1 (Default), control the
transmitter and the far-end third-party device.
RS232 Mode 1: RS232 Control
Scaler & Remote
50780%
Switch to RS232 mode 2, control the transmitter
from remote.
RS232 Mode 2:RS232 & Remote
Control Scaler
6.3.2 Signal Switching
Command
Description
Feedback Example
50770%
Enable auto-switching.
Auto Switching
50771%
Disable auto-switching.
Manual Switching
50701%
Switch to HDMI input 1.
Switch to HDMI 1
50702%
Switch to HDMI input 2.
Switch to HDMI 2
6.3.3 HDCP Compliance
Command
Description
Feedback Example
50790%
Set the HDCP status of HDMI output socket to
Active mode.
HDCP Active
50793%
Report HDCP status.
HDCP Off/ HDCP On/
HDCP Active (default)

4K Wallplate HDBaseT Transmitter
12
6.3.4 EDID Configuration
Command
Description
Feedback Example
50772%
EDID pass-through (default).
EDID: bypass mode
50773%
Set EDID data to 1080P PCM 2.0CH.
EDID:1080P&PCM 2ch
50774%
Set EDID data to 1080P Dolby 5.1.
EDID:1080P&5.1ch
50775%
Set EDID data to 1080P 3D Dolby 5.1.
EDID:1080P3d&5.1ch
50776%
Set EDID data to 1080I PCM 2.0 CH.
EDID:1080i&PCM 2ch
50777%
Set EDID data to 4Kx2K PCM 2.0 CH.
EDID:4K&PCM 2ch
50799%
Program EDID file, send EDID data within 10s.
Waiting for edid within 10 secs!
50778%
Report EDID data.
EDID:1080P&PCM 2ch
EDID:1080P&5.1ch
EDID:1080P3d&5.1ch
EDID:4K&PCM 2ch
EDID:1080i&PCM 2ch
EDID:bypass mode
EDID:User define
6.3.5 System Setting
Command
Description
Feedback Example
50698%
Software upgrading.
50699%
Check the software version.
Version Vx.x.x
50617%
Restore factory default.

4K Wallplate HDBaseT Transmitter
13
7. Panel Drawing
LINK
RESET
FIRMWARE
SOURCE/AUTO
HD MI I N 1
POWER
HD MI 1 HD MI 2
HD MI I N 2
12 V T x Rx
OUT
RS232
HD BT O UT
104.5 mm
89.0 mm
66.0 mm
32.0mm
69.0 mm
47.0 mm

4K Wallplate HDBaseT Transmitter
14
8. Troubleshooting & Maintenance
Problems
Potential Causes
Solutions
Color losing or no video
signal output in HDMI display
The connecting cables
may not be connected
correctly or it may be
broken.
Check whether the
cables are broken or
connected correctly and
in working condition.
No HDMI signal output in the
device while local HDMI
input is in normal working
state
Output image with snowflake
POWER indicator doesn’t
work or no respond to any
operation
Loose or failed power
cord connection.
Ensure the power cord
connection is good.
Static becomes stronger
when connecting the video
connectors
Bad grounding.
Check the grounding
and make sure it is
connected well.
Cannot be controlled by front
panel buttons
The unit may be broken.
Send it to authorized
dealer for repairing.
If your problem persists after following the above troubleshooting steps, please contact
the authorized dealer or our technology support for further assistance.

4K Wallplate HDBaseT Transmitter
15
9. Customer Service
The return of a product to our Customer Service implies the full agreement of the terms
and conditions hereinafter. There terms and conditions may be changed without prior
notice.
1) Warranty
The limited warranty period of the product is fixed three years.
2) Scope
These terms and conditions of Customer Service apply to the customer service
provided for the products or any other items sold by authorized distributor only.
3) Warranty Exclusions
l Warranty expiration.
l Factory applied serial number has been altered or removed from the product.
l Damage, deterioration or malfunction caused by:
ü Normal wear and tear.
ü Use of supplies or parts not meeting our specifications.
ü No certificate or invoice as the proof of warranty.
ü The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
ü Damage caused by force majeure.
ü Servicing not authorized by distributor.
ü Any other causes which does not relate to a product defect.
l Shipping fees, installation or labor charges for installation or setup of the product.
4) Documentation
Customer Service will accept defective product(s) in the scope of warranty
coverage at the sole condition that the defeat has been clearly defined, and upon
reception of the documents or copy of invoice, indicating the date of purchase, the
type of product, the serial number, and the name of distributor.
Remarks: For further assistance or solutions, please contact your local distributor.